Riwbox WT-8S Bluetooth Headphones- User Manual
- June 4, 2024
- Riwbox
Table of Contents
Riwbox WT-8S Bluetooth Headphones
Specification
-
Form Factor
Over Ear -
Material
Rubber -
Connectivity Technology
Wireless -
Brand
Riwbox -
Wireless Communication Technology
Bluetooth -
Product Dimensions
7.09 x 5.91 x 3.15 inches -
Item Weight
12 ounces
Introduction
You will get a unique fashion experience thanks to the 7 distinct coloured LED
light breathing designs. You become the standout in the crowd as the LED
breathing lights change colours in time to the music. To turn off the LED
light and gain extra power, press the “M” button for a long time. The WT-8S
headphones have a 40mm large speaker and a crisp bass design that let you hear
the song’s changing bass notes clearly and let it drive your sensory
experience.
Built-in TF slot: built-in storage area, TF slot unlimited memory TF card,
carry every song you choose, with your favourite songs to accompany you in
your favourite spot, let yourself dive into the world of music, free from
phone disturbance. (TF mode only works with MP3 files)
How to Pair?
The headphones will instantly connect to your smartphone when you turn them on. On the phone’s screen, the connection status will be shown, and the battery level will be reminded via voice.
If you are connecting for the first time,
- Turn the headphones on.
- Now go to settings, Go to Bluetooth, and Search for the Available devices.
- Click on the name of the device.
Turning on the LED
Push the volume down button to switch off the flashing LED indicator light when the headphones are in pairing mode (flashing red and blue). After that, switch the headphones on and off before connecting them to your device as usual.
FAQs
How do I pair my Riwbox Bluetooth headphones?
How to pair the headphones. In the power-on state, press the button to the “ON” position; the multicolored lights will turn on, Bluetooth will pair, and the red and blue lights will alternately flash. Turn on the Bluetooth on your phone.
How do I reset my Riwbox headphones?
Put the headphones in pairing mode (flashing red and blue) and then push the volume down button to turn off the flashing LED indication light. After that, turn the headphones off, then on, and connect them to your device in the usual way.
How do I pair my wt 7s headphones?
What is the procedure for pairing my Riwbox wt 7s headphones? Simply turn on the headphone and it will automatically connect to your device. The status of the connection will be displayed on the phone’s screen, and a voice reminder for the battery level will be provided.
How do I turn off the LED light on my cat headphones?
1. Turn on the Headphone. 2. Short press the Light button 3 times to turn on/off the LED lights.
Why won’t my Bluetooth headphones connect to my phone?
It’s usually because the device’s own Bluetooth is switched off, or isn’t in pairing mode. Check the user manual to find out how to make it discoverable by turning on pairing mode. With some headphones, it’s a case of holding the power button down for longer, but with other devices there’s a dedicated Bluetooth button
How do you reset Bluetooth headphones?
Press the power button to turn off the headphones. Press the power button again and hold for five seconds. This will turn on the alternating blue and red light. The headphones have been reset and can now be paired with your device.
Why are my headphones blinking blue?
If your wireless headphones are blinking blue, it could mean a few things. A constant blinking blue light can indicate a healthy connection. A slow pulsing blue light can mean the headphones are in pairing mode. The most common light pattern for pairing mode is blinking red and blue.
Why is my Bluetooth headset blinking red and blue?
When the light is flashing red and blue, the headphones are ready to be connected to a Bluetooth source. When they connect, the light will start slowly flashing blue only. When you turn them off, you hold the middle button down until the light turns red. When you let go of the button, the headphones will shut off
How do I turn on the LED on my headphones?
You should have a controller with volume control on the side of your headset. This is also where the mute button is typically located and handles LED effects control. Hold down the volume button for a few seconds once you find the button position. Once it begins flashing, the LED lighting effects are active.
Why won’t my JBL headphones connect to Bluetooth?
JBL headphones do not appear on the available devices list in the Bluetooth settings. The most common reason your headphones will not appear in the Bluetooth devices list is that they are not in pairing mode. Check to see if the headphones are powered on.