AC INFINITY Cloudray Circulation Fan System User Manual
- June 8, 2024
- AC Infinity
Table of Contents
AC INFINITY Cloudray Circulation Fan System
WELCOME
Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service. If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com and click contact for our contact information.
MANUAL CODE CC2209X1
PRODUCT
- CLOUDRAY A6
- CLOUDRAY S6
- CLOUDRAY T6
- CLOUDRAY A9
- CLOUDRAY S9
- CLOUDRAY T9
MODEL
- AC-CCA6
- AC-CCS6
- AC-CCT6
- AC-CCA9
- AC-CCS9
- AC-CCT9
UPC – A
- 819137022416
- 819137022423
- 819137022447
- 819137022454
- 819137022461
- 819137022478
PRODUCT WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
- Ensure your power source conforms to the electrical requirements of this product.
- Check your local code restrictions for additional safety measures that may be needed for a proper code compliant installation.
- Read all instructions before installing and using this product.
- If you are unfamiliar or have doubts about performing this product’s installation, seek the services of a qualified, trained, and licensed professional. Inappropriate installation will void this product’s warranty.
- Do not attempt to hardwire this product. Performing any retrofitting actions may result in personal injury and/or electrical damage, and will void this product’s warranty.
- This product must not be used in potentially hazardous locations such as flammable, explosive, chemical-laden or wet atmospheres.
- Do not cover power cords with rugs or other fabric materials.
- This product has rotating parts. Safety precautions should be exercised during the installation, operation, and maintenance of this product.
- Do not insert or allow fingers or foreign objects to enter through the fan grille as it may cause electric shock, fire, or damage to this product. Do not block or tamper with this product in any manner while it is in operation.
- Do not depend on the on/off programming as the sole means of shutting power from this product. Unplug the power cord before installing, servicing, or moving this product.
- Do not operate this product while its cord is damaged, or if it malfunctions, has been dropped, or is damaged in any manner.
RECOMMENDED USAGE
REDUCING CORD TENSION
Please make sure to provide enough slack for the power cord and the extension
cord. The fan should be able to oscillate freely without tugging on its cords.
MAXIMIZING LIFESPAN
This fan utilizes the latest in step motor technology that allows it to
operate 24 hours a day.
However, to maximize its lifespan, we do not recommend having it oscillate nonstop for more than 18 hours a day.
This will preserve the motor by passively keeping it cool to prevent it from wearing down.
KEY FEATURES
PRODUCT CONTENTS
INSTALLATION
STEP 1
Twist to remove the bigger knob piece from the grip clip.
Pull the smaller button piece from the vice grip. STEP 2
Slide the grip clip into the swivel.
You may need to pull its clamps apart for it to fit over the swivel. This
tightness ensures your fan will not tilt downwards on its own.
STEP 3
Replace the knob and button on either side of the mounting point as desired.
STEP 4
Clamp your clip fan onto a pole or post.
POWERING AND SETUP
STEP 1
Plug your clip fan’s power cord into an AC power outlet to power it.
STEP 2
You may cable manage the cords using the included cable ties or cable mounting
set.
Adhere the tie mount onto a clean surface. Loop the wire tie into the mount
and around the cables.
CLEANING
STEP 1
Unplug your clip fan.
STEP 2
Remove the front grille by twisting the grille counter-clockwise and pulling
it off. Removing the front grille to clean the fan blades will not void your
warranty.
STEP 3
Wipe off any dust and debris from the grille and fan blades using a damp
cloth. Set aside to dry as needed.
STEP 4
Realign the grille over your clip fan and twist clockwise to lock it in place.
UISTM PLATFORM
The UISTM platform enables you to connect a single central controller with
several grow devices simultaneously. By creating this fully integrated system,
you can power and program all your devices together or separately for
optimized grow tent management.
Your grow system can be regulated using your controller hub or remotely on the
AC Infinity app (paired with compatible controllers), where you will have
access to automation programming and climate data.
You can also connect your favorite grow light and outlet device to integrate
them into the UIS platform using our RJ11/12 adapter and control plug module.
Central controllers, mounting plates, and grow devices will be
sold separately and may still be in development at the time of your purchase
of this product.
CONNECTING TO CONTROLLERS
The CLOUDRAY circulation fan can connect with select smart controllers as part of an integrated system using the included UIS cable. Please see below for limitations.
UISTM CONNECTORS
To connect to the latest gen controllers such as CONTROLLER 69 PRO (sold
separately), use the included UIS extension cord to directly connect the
CLOUDRAY fan’s UIS port to the controller’s UIS port.
MOLEX CONNECTORS
To connect to previous gen controllers such T-Series controller (UNC529) or
CONTROLLER 67 (sold separately), use the included adapter dongle to convert
the controller’s molex connector to a UIS connector. Then use the included UIS
extension cord to connect that to the CLOUDRAY fan’s UIS port.
Shown: CONTROLLER 67
PROGRAMMING
S-SERIES
FAN SPEED ADJUSTING
Your clip fan features a single button that cycles through the fan speed from
0-10, indicated by the ring of LED lights.
Press the speed button to increase the fan speed level by one.
Pressing the button past speed 10 will cycle the fan speed back to 0.
POWERING ON/OFF
Hold the speed button for 4 seconds to turn the fan OFF. Pressing it again
from OFF will turn the fan ON at its last speed setting.
OSCILLATION
In addition to the standard features, S-Series models can oscillate to provide
airflow at a wide angle. The oscillation function is manually activated using
the oscillation button and cannot be controlled using external UIS
programming.
If set to off, your clip fan will not oscillate regardless of any external
programs.
If set to on, oscillation will automatically start if the external program
activates your clip fan to turn ON. Oscillation will then automatically stop
if the external program deactivates your clip fan to turn OFF.
ADJUSTING OSCILLATION RANGE
The oscillation button cycles through the oscillation levels from 0-10 with a
maximum 90° angle range, indicated by the ring of LED lights. This will ensure
your clip fan will not come in contact with your grow tent while enabling you
to adjust the focus of the circulation.
Press the oscillation button to increase how wide the fan will oscillate by
one level.
Pressing the button past level 10 will cycle the oscillation back to 0.
CLOUDRAY FAQ
Q: Can I mount this clip fan upside down?
A: Yes. The CLOUDRAY can be mounted right-side up or upside down.
Q: Will I be able to hardwire this clip fan to my own controller or
thermostat?
A: We do not recommend hardwiring or splicing our fan’s power wires. Such
modifications may compromise electrical safety and will void this product’s
warranty.
Q: Do I need to use a power converter if I’m outside the US?
A: This product’s voltage range is 100-240V AC. You may need a simple travel
adapter to plug it into a foreign socket, or a power converter if your country
uses a different voltage.
Q: What is the CFM of my clip fan?
A: Please refer to your CLOUDRAY model’s product listing for its CFM
specification.
Q: Will the clamp be able to hold onto my grow tent?
A: The heavy-duty clamp is capable of gripping onto the poles of any thickness
in any grow tent.
Q: Will I be able to connect additional units to this clip fan?
A: The CLOUDRAY does not support daisy-chaining or interconnectivity between
additional clip fans. However, multiple fans can be connected to a UIS™
controller to receive smart programming.
Q: How long can I keep this clip fan running?
A: The CLOUDRAY features the latest innovations in step motor technology,
allowing it to run continuously for 24 hours a day.
AC INFINITY PRODUCTS
Inline Duct Fans
The CLOUDLINE series is a line of duct fans designed to quietly ventilate AV
rooms and closets, as well as various DIY air circulation and exhaust
projects. Features a thermal controller with intelligent programming that will
automatically adjust duct fan speeds in response to changing temperatures.
Carbon Filters
The duct carbon filter is designed to eliminate odors and chemicals for grow
tents and hydroponic spaces. It utilizes premium grade Australian charcoal
that features greater absorption power and a longer lifespan. Enables maximum
airflow pass through as part of an intake or an exhaust system.
Grow Lights
An indoor LED grow lamp designed to simulate outdoor daytime lighting to
improve and accelerate your plant’s photosynthesis. Using the latest Samsung
LM301H diodes, this LED grow system efficiently produces full-spectrum
lighting usable during all stages of the grow cycle.
Discover the latest innovations in environmental controls at acinfinity.com
WARRANTY
This warranty program is our commitment to you, the product sold by AC Infinity will be free from defects in manufacturing for a period of two years from the date of purchase. If a product is found to have a defect in material or workmanship, we will take the appropriate actions defined in this warranty to resolve any issues.
The warranty program applies to any order, purchase, receipt, or use of any products sold by AC Infinity or our authorized dealerships. The program covers products that have become defective, malfunctioned, or expressively if the product becomes unusable. The warranty program goes into effect on the date of purchase. The program will expire two years from the date of purchase. If your product becomes defective during that period, AC Infinity will replace your product with a new one or issue you a full refund.
The warranty program does not cover abuse or misuse. This includes physical damage, submersion of the product in water, incorrect Installation such as wrong voltage input, and misuse for any reason other than intended purposes. AC Infinity is not responsible for consequential loss or incidental damages of any nature caused by the product. We will not warrant damage from normal wear such as scratches and dings.
Contact our dealers department at dealers@acinfinity.com or 626-838-4656 for more information about our dealers and distributors program. Contact our customer service department at support@acinfinity.com or 626-923-6399 for product and warranty assistance. Our business hours are Monday through Friday, 9:00 am to 5:00 pm PST.
If you have any issues with this product, contact us and we’ll happily resolve your problem or issue a full refund!
COPYRIGHT © 2022 AC INFINITY INC. ALL RIGHTS RESERVED
No part of the materials including graphics or logos available in this booklet
may be copied, photocopied, reproduced, translated or reduced to any
electronic medium or machine readable form, in whole or in part, without
specific permission from AC Infinity Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>