Shark NV501 Professional Vacuum Cleaner User Manual

Shark NV501 Professional Vacuum Cleaner

IMPORTANT SAFETY INSTRUCTIONS

FOR HOUSEHOLD USE ONLY

WARNING
To reduce the risk of injury, fire, electric shock, and property damage resulting from improper use of the appliance, carefully observe the following instructions This unit contains electrical connections and moving parts that potentially present risk to the user

THE POWER NOZZLE, WAND, AND HANDLE CONTAIN ELECTRICAL CONNECTIONS

• These are not serviceable parts.
• Do not use to vacuum any liquids.
• Do not immerse in water.
• If the handle/wand is damaged, discontinue use.
• Inspect the power cord or plug for any damage before use. DO NOT use a vacuum cleaner with a damaged cord or plug. Turn off all controls before plugging or unplugging the vacuum cleaner. Store your vacuum cleaner with the power cord secured around the two cord hooks.
• DO NOT use outdoors or on wet Use only on dry surfaces.
• Unplug from the electrical outlet when not in use and before servicing.
• If the vacuum cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to SharkNinja Operating LLC for examination, repair, or adjustment.
• The hose contains electrical DO NOT use it when damaged, cut, or punctured.
• DO NOT pull or carry the vacuum cleaner by the cord or use the cord as a handle.
• DO NOT unplug by pulling on Grasp the plug, not the cord.
• DO NOT handle the plug or vacuum cleaner with wet hands.
• DO NOT run the vacuum cleaner over the power cord, close a door on the cord, or pull the cord around sharp corners.
• The use of an extension cord is NOT recommended.
• DO NOT leave the vacuum cleaner unattended when plugged in.
• Keep cord away from heated

GENERAL USE

• Use only as described in this
• Keep your work area well
• Keep the vacuum cleaner moving over the carpet surface at all times to avoid damaging the carpet fibers.
• DO NOT place the vacuum cleaners on unstable surfaces such as chairs or tables.
• DO NOT put any objects into DO NOT use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce airflow.
• DO NOT allow the appliance to be used by Close attention is necessary when used near children. This is not a toy.
• DO NOT use without a dust cup and/or filters in place.

DUST CUP/FILTERS/ACCESSORIES

Before turning on the vacuum:

• Make sure that all filters are thoroughly dry after routine cleaning.
• Make sure that the dust cup and all filters are in place after routine maintenance.
• Make sure accessories are free of
• Only use Shark-brand filters and accessories (failure to do so will void the warranty).

HOSE ATTACHMENTS

• DO NOT use if the airflow is restricted; if the air paths or the motorized floor nozzle become blocked, turn the vacuum cleaner off and unplug it from the electrical outlet. Remove all obstructions before you turn on the unit again.
• Keep the end of the hose and accessory openings away from the face and body.
• Keep cleaning tools and hose suction openings away from hair, face, fingers, uncovered feet, or loose clothing.
• Only use the manufacturer’s recommended

GENERAL CLEANING

• DO NOT pick up large-sized
• DO NOT pick up hard or sharp objects such as glass, nails, screws, or coins that could damage the vacuum cleaner.
• DO NOT use it to pick up drywall dust, fireplace ash, or embers.
• DO NOT use it as an attachment to power tools for dust
• DO NOT pick up smoking or burning objects such as hot coals, cigarette butts, or matches.
• DO NOT pick up flammable or combustible materials (e.g., lighter fluid, gasoline, or kerosene) or use a vacuum in areas where they may be present.
• DO NOT pick up toxic solutions (e.g., chlorine bleach, ammonia, or drain cleaner).
• DO NOT use in an enclosed space where vapors are present from paint, paint thinner, moth-proofing substances, flammable dust, or other explosive or toxic materials.
• DO NOT vacuum up any
• DO NOT immerse the vacuum cleaner in water or other liquids.
• Use extra care when cleaning on stairs.

POLARIZED PLUG
To reduce the risk of electric shock, this vacuum cleaner has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT force it into an outlet or try to modify it to fit.

ROTATOR PROFESSIONAL LIFT-AWAY

WELCOME!
Congratulations on your purchase. Use this instruction manual to learn about your new vacuum’s great features. From assembly to use to maintenance, you will find it all here.

MAIN UNIT

• Hose
• Suction Control
• Handle Release Button
• Upper Cord Hook
• Power Button
• Lift-Away®Button
• Brushroll on/off button H Wand Release Button I Wand
• Lower Cord Hook
• Motorized Floor Nozzle L Brushroll Indicator Light M Headlights

TIP: For quick cord access, rotate the upper hook down and remove the cord.

TIP: To store your vacuum, wrap a cord around cord hooks.

1. Place the pod onto the floor nozzle.
2. Slide the wand into the base of the pod.
3. Insert the handle into the top of the wand. Then attach the hose into the base of the pod.
4. Insert tools into accessory clips, then tuck the hose between the clips.

USING YOUR VACUUM IN UPRIGHT MODE

WARNING: DO NOT use to pick up drywall dust, fireplace ash, or e m b e r s.   DO NOT use as an attachment to power tools for dust collection

WHAT DOES THE BRUSHROLL INDICATOR LIGHT MEAN?

Solid Green

The brushroll is on and working as it should.

Solid Red

There is a jam in the brushroll area. Turn your vacuum off and remove the blockage.

No Light

The brushroll is off. To turn it on, press the BRUSHROLL button. The light should turn green, and the brushroll should spin.

1. Plug the power cord into the outlet. Place the foot on the floor nozzle and tilt the handle back.

2. Press POWER to clean hard floor surfaces, area rugs, or above floor. The brushroll will not spin in this mode.
   NOTE: For deep cleaning per ASTM F 608 (embedded dirt in carpets) please ensure the brushroll is on with the suction control closed.

3. Press POWER and BRUSHROLL to clean carpets. The BRUSHROLL button will illuminate green. The brushroll will spin only when the vacuum is reclined and the BRUSHROLL button is green.

THE BENEFITS OF SUCTION CONTROL

Suction Control is a way for you to adjust suction power when you are using different tools or vacuuming different surfaces. For example, if you are feeling resistance vacuuming thick carpet or upholstery, opening the suction control to MIN will help reduce your push/pull effort.

1. Press the HANDLE release button when you need to clean within short reach. OR Press the WAND button on the pod when you need to clean with a longer reach.
2. Insert the wand or handle directly into the desired tool and pivot back to release the tool from the clip.
3. The collar is located at the base of the top handle. Rotate the collar counterclockwise to minimize suction. Close by rotating clockwise to maximize suction.

WARNING: Ensure solid footing when using in Lift-Away mode. Using an application where you lack stability may result in personal injury.
TIP: Hold pod in hand to clean in Lift-Away mode.

WHAT IS LIFT-AWAY?
Our Lift-Away feature allows you to remove the pod from the floor nozzle to easily clean stairs, above the floor with accessories, or hard floors with hard-floor attachments.

LIFT-AWAY CLEANING

1. Press LIFT-AWAY to lift the pod off the floor nozzle.
2. Press the HANDLE release button when you need to clean within short reach.
3. Or you can press the WAND button on the pod when you need to clean with a longer reach.
4. Attach desired cleaning tool to the end of the handle or wand.

USING YOUR CADDY

If your vacuum comes with a caddy, use these instructions. To purchase a caddy, go to sharkclean.com

TIP: Use the posts on the caddy to store additional cleaning accessories.

1. Press LIFT-AWAY to lift the pod off the floor nozzle and place the pod onto the canister caddy.
2. Press the WAND button to release the wand or press the HANDLE button to release the handle only.
3. Attach the preferred accessory to the wand or handle.
4. To release the pod from the caddy, press LIFT AWAY and lift the pod.

COMPATIBLE ACCESSORIES

There are a variety of accessories that are compatible with this vacuum series. The top flap of your box shows the select accessories that are included with your model. To purchase additional accessories, go to sharkclean.com

A Crevice Tool

Gives you extended cleaning reach for small spaces.

B Pet Power Brush

Designed for removal of pet hair and ground-in dirt from carpeted stairs and upholstery.

C Wide Upholstery Tool

Remove pet hair and dust from curtains and other delicate fabrics and upholstery

D Under-Appliance Wand

Extend to access areas under hard-to-move appliances and furniture.

E Straight Suction Floor Nozzle

Designed to pick up large and small debris from all hard floor surfaces and area rugs

F Home & Car Detail Kit

Extension tubes and micro-tools clean the tightest spaces.

MAINTENANCE

To keep your vacuum’s suction power optimal, follow these instructions. Make sure the unit is off and the cord is unplugged.

WARNING: To reduce the risk of shock and unintended operation, turn the power off and unplug the unit before servicing.

Hand washes with water only to prevent damage from cleaning chemicals. Allow ALL filters to dry completely before replacing them in the vacuum to prevent liquid from being drawn into electric parts.

IMPORTANT: Do not use soap when cleaning the HEPA filter.

RECOMMENDED FILTER CLEANING SCHEDULE:

• Pre-Motor Filter Kit
  (Foam & Felt) XFF500 Clean every 3 months.

• Post-Motor Filter
  (HEPA) XHF500 Clean once a year.

EMPTYING THE DUST CUP

• Pull up on the dust cup release latches and lift the dust cup off the pod.
• Hold the dust cup over a trash bin and press the empty-release latch on the bottom.
• Press the top dust-cup release latch to access the dust screen and remove built-up debris as required.

CLEANING THE FILTERS

• Pre-Motor (foam and felt): With the dust cup removed, take out and rinse the foam and felt filters with water. Tap loose dirt off filters between washes as needed.
• Post-Motor (HEPA): To access the HEPA filter, reach under the grill and press the button and pull the grill away from the vacuum. Remove and rinse the HEPA filter.

CHECKING FOR BLOCKAGES

WARNING: To reduce the risk of shock and unintended operation, turn the power off and unplug the unit before servicing.
TIP: You can also check for blockages in the hose and tubes. Just remove the floor nozzle, dust cup, and hose, and shine a flashlight in the openings.

BOTTOM OF FLOOR NOZZLE

1. Using a coin, turn the screws to the unlock position and pull up to expose the airway. Remove the blockage.
2. Remove any string, hair or debris that may be wrapped around the brushroll.

HOSE CUFF AT BASE OF POD

1. Squeeze the tabs and remove the hose.
2. Tilt elbow down 90 degrees.
3. Press the elbow release latch.
4. Remove the elbow and check for blockages. Once blockages are removed, replace the elbow by inserting back into the opening, then clipping it back into the latch.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>