MYao A003 Magnetic Wireless Power Bank User Manual

MYao A003 Magnetic Wireless Power Bank User Manual

Illustration

Specifications

Operation Instructions MYao

Wireless charging: Put a wireless chargin,g phone on A003 ( IPhone 12 and later series can be used directly, other need to use metal rings). Shake the power bank the
Indicator light will turn on,hghts off (wireless LED indicator ) after 3 flashes and j ust the power LED keeps on. The A003 will charge tor the phone automatically.

Type-C charg ing:

Use a Type-C cable to connect with the A003, the other end con r c ct to the mobiles, the A003 will charge for the mobiles automatically.

USB charging:

Use a USB cable to connect with the A003, the other end connect to the mobiles, the A003 will chargefor the mobiles automatically.

Recharge the power bank A003:

Connect a USB cable to USB adapter, connect the other end of the Type-C pots on the input port on the power bank. Plug the USB adapter into the outlet to begin Charging.

Attention

Read all the instructions before using the product.
Do not subject the product to direct sun and high temperatures,
Do not place on a surface that is wet from water or cleaning solvents.
Do not puncture, throw, drop, bend or modify. MYao
Stop using the product when it generates unusual s mell, heating, distortion of any other abnormalit ies.
Please keep it out of the reach of children.

CORRECT DISPOSAL FOR THIS PRODUCT

This marking indicates that this product should not be disposed of with other household wastes t hroughout the EU. To prevent possible harm to the environment
or human health from uncontrolled waste dis posal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling,

CAUTION

Risk of Fire and Burns. Do Not Open, Crush, Heat Above 60~C or Incinerate.
Follow Manufacturer’s Instructions.

FCC WARNING:

This device complies with part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or mod ific ations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B cligital device, pursuant to part 15 ol the FCC Rules. These limits are designed t o provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>