ANSMANN 254PD Home Charger Instruction Manual
- June 8, 2024
- ANSMANN
Table of Contents
ANSMANN 254PD Home Charger
OVERVIEW
FOREWORD
Dear Customer,
Many thanks for choosing an ANSMANN USB-PD charger. The operating instructions
will help you to get the best from the functions of your new USB-PD charger.
We hope you enjoy your new product. Your ANSMANN Team
SAFETY INSTRUCTIONS
- Read the operating instructions carefully before first use and observe the safety instructions.
- The product can be damaged by impacts, shocks or being drop-ped, even from low heights. Handle the product carefully!
- Do not use the device if there is damage to the housing, plug or cable. Contact the authorised dealer!
- The device must only be operated in closed, dry rooms!
- In order to prevent any risk of fire or electric shock, the device must be protected from moisture and rain!
- Only carry out cleaning and maintenance tasks with the mains plug disconnected!
- Do not open the device!
- Keep away from children! Children should be supervised in order to ensure that they do not play with the device!
- This device is not to be used by persons (including children) who have restricted physical, sensory or mental capabilities or who do not have adequate experience and knowledge in handling this device. Such persons must be instructed beforehand by a supervisory person who is responsible for their safety or must be supervised during the use of the device!
- Failure to observe the safety instructions can result in dangerous injuries to persons or damage to the device!
- If you have questions please contact your local dealer or our service department.
- The product must not be used permanently in conjunction with a travel adapter.
- PD capable
- USB Type C PD capable
- PD capable
- Quick charging High power
CHARGING DEVICES
In order to charge a device, such as a smartphone for example, please use a
suitable USB-PD cable or the original charge cable for your device. The USB-PD
charger has a Type-C and USB-A output. Please use a suitable Type-C cable for
this. Insert the USB / Type-C plug of the cable into the USB-PD charger and
the other end into your device. The charging process starts automatically.
The USB-PD charger has both USB and Power Delivery (PD) protocols. In order to
be able to use this technology, please check that your end-device is
compatible.
Simultaneous charging of multiple end-devices is possible with restrictions.
This is dependent on the total required charge current and charge voltage.
- The USB-PD charger switches off automatically once the charging is complete. Please disconnect your device from the USB-PD charger once the charging process is complete.
- The USB-PD charger may heat up a little depending on the output power required.
USE
NOTE: MAINS VOLTAGE 110-240V
The USB-PD charger is suitable for a mains voltage of 100-240V and so can be
used throughout the world. Please note that a suitable country-specific
adapter may be required for this.
NOTE: POWER DELIVERY
- Automatic detection: No manual adjustments or changes re-quired – only the correct components are required (cable and end-device must be PD-compatible).
- With the huge number of different PD end-devices and their soft-ware/ firmware versions, it is possible that the function is not detected or that it is not fully or flawlessly supported.
- End-devices whose original chargers require more than 45.0W of rated output power will charge slower with this charger.
WARNING
- It is important that all end-devices to be charged with the USB PD charger are suitable for the PD protocol.
- Ensure that your end-device (smartphone, tablet, notebook, console or other applications) is suitable for one of the output voltages 5.0V/9.0V/12.0V/15.0V/20.0V.
CARE
- Disconnect the device from the mains before cleaning or before storing for an extended period of time.
- Clean the charger only with a dry, soft cloth.
TECHNICAL DATA
1. Input:| AC110-240 V | 50-60 Hz | max. 1.3 A
---|---
2. Output:| USB-A: 5.0 V/2.4 A/12.0 W
| USB Type-C (PD): 5.0 V/3.0 A/15.0 W
| 9.0 V/3.0 A/27.0 W
| 12.0 V/3.0 A/36.0 W
| 15.0 V/3.0 A/45.0 W
| 20.0 V/3.0 A/60.0 W
3. Max. output power:| 60.0 W (PD)
4. Max. outside temperature: 0°C…30°C
5. Average efficiency during operation: 81,4 %
6. Efficiency with low load (10%): 77,2 %
7. Power consumption with no load: 0,23 W
ENVIRONMENTAL INFORMATION
- The device should not be discarded in the normal household waste under any circumstances. Dispose of the device via an authorised disposal centre or your communal waste disposal facility.
- Observe the current applicable regulations. Contact your waste disposal facility in the event of any doubt. Dispose of all packaging materials via an environmentally friendly disposal facility.
LIMITATION OF LIABILITY
- The information contained within these operating instructions can be changed without prior notification. ANSMANN accepts no liability for direct, indirect, incidental or other damage or consequential damage arising through improper handling or through disregard of the informa-tion contained within these operating instructions.
GUARANTEE
- The device has a three-year guarantee. The guarantee does not apply to damage to the device arising through a failure to comply with the operating instructions.
- Subject to technical changes. We assume no liability for printing errors. 01/2022
- You can find our warranty terms online at www.ansmann.de
ANSMANN AG Industriestrasse 10 97959 Assamstadt Germany
Hotline: +49 (0) 6294 / 4204 3400
E-Mail: hotline@ansmann.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>