PHILCO PMG3820 Built-In Microwave Oven Instruction Manual
- June 8, 2024
- PHILCO
Table of Contents
Installation Instruction
The following must be noted
Electrical connection
The appliance is fitted with a plug and must only be connected to a properly
installed earthed socket. Only a qualified electrician who takes the
appropriate regulations into account may install the socket or replace the
connecting cable. If the plug is no longer accessible following installation,
an all-pole isolating switch must be present on the installation side with a
contact gap of at least 3 mm. Contact protection must be ensured by the
installation.
Fitted units
The installation cabinet must not have a back panel behind the appliance.
Minimum installation height: 850 mm. Ventilation slots and intakes must not be
covered.
Installing the oven – Fig. 2
Note: Do not trap or kink the mains lead.
Appliance in a wall-hanging unit – Fig. 1A
Appliance in a tall unit – Fig.1B
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>