Neomounts AFL-875WH1 Videobar and Multimedia Kit Instruction Manual
- June 8, 2024
- Neomounts
Table of Contents
Neomounts AFL-875WH1 Videobar and Multimedia Kit
OVERVIEW
PARTS
STEP1
- Install the adapter plate
STEP 2
- Attach part H or I, depending on the type of videobar
STEP 3
- Install the combination above or below the screen
STEP 4
- Mount the videobar to the bracket
STEP 5
- Install the shelf holders and attach the shelf to the holders
STEP 6
- Place the media box on the shelf
CAUTION
- To ensure sarety, please read this manual Careruiiy Derore installation and Tollow the inStructions. Store tnis manual in a secure place ror ruture rererence.
- THe manutacturer shall not De legallyresponsible ror any equipment damage or personal inury caused Dy incorrect installadon or operaton otner than hat coveredin this manual.
- The manufacturer shall not be liable for damage to equipment or personal injuries arising out of human factors or acts of nature, such as earthquake or typhoon.
- It is recommended that the mount be installed by qualified personnel only.
- At least two persons are needed to install or remove the product to avoid hazard of falling objects.
- Please carefully inspect the area where the mount is to be installed:
- Avoid places that are subject to high temperatures, humidity or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Oniy install on verucal walls and avoid slanted surtaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, as it may cause eye fatigue when viewing the display panel.
- Maintain surmicent space around thne display to ensure adequate ventlauon.
- 1o ensure safe installation, nirst check the structure of the wall, ceiling or tloor and select a secure mounting location.
- The wall, ceiling or floor should be strong enough to sustain a weight of at least four times of the display and mount combined. The mounting location must be able to withstand earhquake or other strong shock.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall, ceiling or floor once the display and bracket are removed. Stains may occur after extended use.
- Since the manufacturer has no way to control the wall, ceiling or floor type and installation of the mount, the warranty of the product shall only cover the body of the mount. The warranty period of the product is 5 years.
- Piease consult the English language manual Tor any dispute on conditions.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>