Cosi home CH-ABS01 Premium Air Bed Instruction Manual

Cosi home CH-ABS01 Premium Air Bed

INTRODUCTION

Thank you for choosing to purchase a product from Cosi Home. Please read the entire manual carefully prior to first use and keep in a safe place for future reference. Al Cosi Home products come with a minimum 12-month warranty that is valid from the date of purchase. check your specific country’s warranty regulations. Register your product at www.cosihome.com/register and enjoy the option to buy our extended 3 Year Protection Plan for extra peace of mind.

SAFTEY INSTRUCTION

• Use this product only as described in this manual.
• Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• The appliance is not to be used by persons including children) with reduced physical, sensory or mental capabilities, or lack ot experience and knowledge, unless they have been given supervision or instruction.
• Children must be supervised not to play with the appliance
• Do not let children use the air pump. The air pump is for indoor household use and similar applications only
• Do not immerse the electric air pump in water Keep away from fire.
• Do not operate or expose the air pump to wet environments such as rain or water.
• Do not leave the air pump unattended whilst in use.
• Ensure the air pump Suction and exhaust openings remain free of dust and debris.
• Never insert fingers or metal objects into the air pump suction and exhaust opening
• Do not obstruct the air passage opening or insert any objects into the air passage opening.
• Do not use the power cord or operate tne dir pump With wet hands to prevent electric shock. Store the air bed and air pump indoors ina safe, Clean and dry place, away from sunlight when not in use. Do not operate the air pump if there are signs of damage.
• Do not get flocked surface wet. If this becomes wet, remove any bedsheets or cloths and allow to air dry.
• Never move, carry or hang the air bed by the mains power cable.
• Ensure that the mains Supply (including voltage, frequency and power) complies with the rating label of the appliance.
• Do not use the air pump for more than 5 Consecutive minutes at a time. Allow the air pump to cOol down for 20 minutes before each repeated use.
• The air pump is designed to fully inflate your air bed within 2-3 minutes. The pump wll automatically turn OFF if overheating occurs. This is designed for your safety.
• Do not place an infant too sleep on the mattress. This product is not a toy Children must not be left unattended when using the air bed.
• Do not use flammable liquids or sprays With the air bed, SUch as aerosol tire repar products, as it may ignite or explode. Use the air bed only as a mattress.
• Do not walk, standd or jump on the air bed. This air bed is not a buoyancy aid, lifebuoy or life saving device. Do not use it on or near water.
• Do not set up bed near stairs, doors, sharp edges or bredkable objects. Provide adequate space between bed and objects to avoid entrapment.
• Make sure the area is flat, smooth, even and free of sharp 3 objects that could puncture the bed. Keep pets away from the air bed.
• Pets may puncture the surface of the bed. Avoid sleeping on the edge or tne dir bed. Edges produce less support than the middle of the bed.

SPECIFICATION

• Model CH-ABSO1

• Dimensions: 97 x 188x 48cm

• Net Weight: 4.71 KG

• Gross Weight: 5.369 KG
  Power: 120w

• Voltage: AC 220-240V

• Frequency: 50Hz

• Model CH-ABKO1

• Dimensions: 152 x 203 x 48cm

• Net Weight: 7.13 KG

• Gross Weight: 7.63KG

• Power: 12ow

• Voltage: Ac 220-240V

• Frequency: 50Hz

OPERATING INSTRUCTIONS

Inflation

• Choose a flat, indoor surface large enough to accommodate the inflated air bed.
• Remove any sharp or pointy objects on or near the surface. Lay the air bed out with the bottom surface touching the floor.
• Open the cover at the top of the bed where the power cord is stored.
• Make sure the manual inflation valve is closed. Plug the power cord into an electrical outlet
• Turn the control dial clockwise until the arrow points to INFLATE The single air bed will take up to 1.5 minutes to inflate.
• The king size air bed will take up to 3 minutes to inflate.
• When the air bed is fully inflated, turn the control dial one click anti-clockwise until the arrow points to OFF

Inflation Option

If electrical power is not available, then a conventional foot or manually operated air pump can be connected to the air bed.

Deflation

• Open the cover at the top of the bed wnere tne power cord is stored.
• Make sure the manual inflation valve is closed.
• Plug the power cord into an electrical outlet.
• Turn the control dial anti-clockwise until the arrow points to DEFLATE 
• The air bed will take up to 3 minutes to it. when the air bed is Tully deflated, turn tne contrOl dial one click clockwise the arrow points to OFF.
• Unplug the cord and store it in the power cord compartment.
• Open the cover at the top of the bed where the power cord is stored.
• Plug the power cord into an electrical outlet.
• Turn the control dial anticlockwise OW points to DEFLATE the image
• The air bed will take up to 3 minutes to delete.
• Unplug the cord and store it in the ower cord compartment.

FAQS

Why is my air bed deflating?
There are a few reasons your air bed may be losing air:

First Use: During its first Tew uses, your CosSI Home AIr Bed may sag and require additional inflation to maintain its desired firmness. This is because stretching is a natural characteristic of new vinyl and is normal for the first few days of use. Initiate your air bed at least 30 minutes prior to first use and top up as required to allow the air bed to stretch to its natural shape.
Normal Use: All air beds are designed to lose a small amount or air through their seams during use to reduce the risk of tears and bursting when pressure is added and helps to prevent over-intlation.
Increased Pressure: Your air bed may De derating because the weight limit is nasS Deen exCeeded. MOSt or Our air beds have d weight limit of 250kgs or 550lb. Please check the product page or the specifications in your instruction manual for product-specific weight limits.
Varying Temperatures: Air inside the air mattress can expand or contract when exposed to hot or cold temperatures. At cold temperatures, contracts inside the air Ded and can lead to sagging. I deviation occurs, pump some more air into the mattress. At hot temperatures, air can expand inside the air bed and It will become hard and in extreme circumstances, burst. Release air to avoid damage to your air bed. where possible, aim to keep surrounding temperatures consistent during use.
Puncture : Your air bed may be deflating because it has a puncture.

How do I find a puncture?
To find a puncture, please follow these steps:

• Fill a spray bottle with soapy water eg. washing up liquid.
• Inflate your air bed fully and unplug the power cord from the mains power supply.
• Spray the surface of the inflated air mattres, avoiding the air pump and electrical components.
• Visually inspect the air bed. If there is a puncture, bubbles will start to form over the puncture as air starts to leak out.
• Wipe your air bed dry with a soft dry cloth.
• Repair your puncture with the provided puncture kit.

STORAGE

• Deflate the airbed following the ‘deflation’ instructions.
• Make sure the airbed is clean and dry.
• Lay bed flat with sleeping surface facing upwards. Fold the airbed loosely and avoid sharp bends, corners and creases which can damage the airbed.
• Store the air bed in a safe, clean and dry place, out of reach of children when not in use.

CLEANING AND MAINTENANCE

• Use soapy water to clean the PVC on the sides and bottom of your air bed.
• Do not let the plush surface of your air bed get wet.
• If liquid does come in contact with the top of your air bed, blot it with a damp cloth and leave to air dry.
• To repair punctures to the air bed, use only common PVC repair glue and patches.
• Do not use flammable aerosols on the surface of the air bed.

RECYCLING & DISPOSAL Waste electrical and electronic products (WEEE), batteries, accumulators and packaging should not be disposed of with general household waste. This is to prevent possible harm to the environment and human well-being, and to help conserve our natural resources. Most electrical products with a plug, battery, or cable can be recycled. Contact your local council, household waste disposal service, or the store where you purchased the product for information regarding the collection schemes in your area.

Waste Electrical and Electronic Equipment (WEEE)
This symbol on the product and/ or packaging indicates that Waste Electrical products (WEEE) under Directive 2012/19/EU which governs used electrical and electronic appliances, should not be disposed of with general household waste.

The Mobius Loop This symbol indicates that the product or packaging is capable of being recycled.

**Take-Back Scheme

**

Waste electrical products (WEEE) can be sent to One Retail Group for recycling and disposal when you purchase a new product from One Retail Group, on a like- for-like basis. For more information on how to recycle this product please visit www.cosihome.com. The end-user of electrical and electronic products (WEEE) is responsible for separating old batteries and lamp bulbs before they are handed over to a designated disposal and recycling service. Waste batteries can also be disposed of in collection bins, which can be found in most local supermarkets and household waste recycling centres.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>