NightSearcher New Pulsar NavStar Sequential Hazard Warning & Safety Lights Instructions
- June 4, 2024
- NightSearcher
Table of Contents
- NightSearcher New Pulsar NavStar Sequential Hazard Warning & Safety
- Sequential LED Hazard Warning & Safety Lights
- FULLY PREPARED, FULLY CHARGED
- ENGINEERED FOR EXTREMES
- SPECIFICATIONS
- FAST AND SAFE DEPLOYMENT
- Fast Deployment, Sequential LED Hazard Warning Lights
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
NightSearcher New Pulsar NavStar Sequential Hazard Warning & Safety
Lights
Sequential LED Hazard Warning & Safety Lights
The new Pulsar NavStar is the latest model in our range of Pulsar hazard lights. Available as a set of 10 sequential lights, NavStar is housed in a high-impact, shock resistant and reversible carry case.
- Automatic Turn-on and Turn-off
- Simple Two-Button Operation
- 6 Flash Modes, 3 Colour Modes
- Automatic Synchronisation
- Up to 72 Hours Run Time
- Automatic Recharge in Carry Case
BE SAFE, BE SEEN
Designed with safety in mind, Pulsar NavStar provides the means to cordon off a hazardous area in quick time, and as safely as possible. Automatically turning on with bright, sequential flashing, NavStar can draw attention to a dangerous and unexpected event, both during the day and night. The ideal companion for Police, Fire, Ambulance and Utility services. NavStar can also be used in vehicle breakdowns and roadside assistance, search and rescue operations, or in any situation where public access needs to be restricted, controlled or diverted.
FULLY PREPARED, FULLY CHARGED
The durable polymer housing keeps the warning lights fully charged when connected to the supplied 12/24V vehicle charger or 240V mains charger. Increase your personal safety and provide critical information to bystanders and passer-bys with a highly visible cordon in any situation.
ENGINEERED FOR EXTREMES
NavStar’s are crush proof up to 3 tonnes, carry an IP68 rating, and can operate in temperatures ranging from -40 degrees up to +60 degrees centigrade. They can be placed directly on the ground or secured to metal structures/vehicles with their built-in high-strength magnets. An optional cone mount is also available from NightSearcher.
SPECIFICATIONS
LIGHT PODS
Power Source
3.7V 750mAh 2.77Wh Lithium Ion Internal Battery
Run Time
Up to 72 hours (depending on lighting mode)
IP Rating
IP68
Visibility
1 Kilometre
Lighting Modes
6 Flashing Modes
Colour Modes
3 Selectable Colours – Red, Amber and Blue
CARRY CASE
Power Source
- 12/24V Vehicle Charger (included)
- 240V AC Mains Charger (included)
PRODUCT CODES
-
NavStar Set: NSPULSARNAVSTAR.
-
Optional Cone Mount: SPPULSARMAG
-
Dimensions
370 x 150 x 335mm -
Net Weight
5KG (including lights) -
Dimensions
112 x 112 x 37mm
FAST AND SAFE DEPLOYMENT
When removed from the carry case, each light will automatically switch on and sequence with the previously removed light. Thanks to the internal memory of the NavStar, the flash rate and colour will be the same as when it was last used. Once placed back into the case, NavStar turns off automatically and recharges if the case is connected to a power source.
Fast Deployment, Sequential LED Hazard Warning Lights
- Automatic Turn-on and Turn-off
- 360 Degree Illumination
- Vertical Beam for Helicopter and Drone Operations
- 6 Flash Modes, 3 Colour Modes
- Automatic Synchronisation
- Up to 72 Hours Run Time
- Automatic Recharge in Carry Case
- Simple Two-Button Operation
THE IDEAL SOLUTION FOR HAZARD WARNING & SAFETY LIGHTING.
Pulsar NavStar are backed by our 3-year warranty on parts and 1-year warranty
on rechargeable batteries. Extend to a 5-year warranty by registering your
purchase on our website. PRODUCT CODES NavStar Set: NSPULSARNAVSTAR. Optional
Cone Mount: SPPULSARMAG Pulsar NavStar by NightSearcher LTD – Patent pending
2022
SCAN THE CODE BELOW FOR MORE INFORMATION
For UK use, Pulsar NavStar conforms to Schedule 13, Part 10: Traffic Signs
Regulations and General Directions 2016 (TSRGD) when operating in blue and
amber light modes. For wider European use, the Pulsar NavStar system also
complies with BS/EN12352:2006 when in red or amber mode. Contact
NightSearcher:
UK – T: +44(0) 23 9238 9774
E: sales@nightsearcher.co.uk
W: www.nightsearcher.co.uk
EXPORT – T: +48 (0) 61 624 2998
E: exportsales@nightsearcher.co.uk
W: www.nightsearcher.com
References
- Leaders in LED Lighting Solutions | NightSearcher
- Searchlights | Floodlights | LED Lights | NightSearcher
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>