LARSON 202220836CH Double Hold-Open Closer Kit Installation Guide
- June 9, 2024
- LARSON
Table of Contents
LARSON 202220836CH Double Hold-Open Closer Kit Installation Guide
Parts List
Install Closers
- Position the jamb bracket ¼” from the back of the hinge mounting frame and secure to door frame with four long screws.
- Secure closer to jamb bracket using the short pin.
- Use a small screwdriver to pull out the closer rod ¼” and press the hold open button.
- Secure the door bracket to the closer using the long pin.
- Close the door.
- Level and install the door bracket on the door with two short screws.
- Turn the adjusting screw to control the speed of the closer.
To engage hold open feature:
Tap the hold open button and move door to desired position.
To release hold open feature:
Push the door open slightly.
LARSON Limited Warranty – This product is warranted to be free of defects in material and workmanship for a period of one year from the date of original retail purchase. Performance under this warranty requires notification by the owner to LARSON Manufacturing and proof of purchase. For warranty or installation questions call 888-483-3768 or visit larsondoors.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>