frisco Aquarium Glass Canopy Instructions

Aquarium Glass Canopy Instructions

Aquarium Glass Canopy

Review and follow all safety instructions!

• Product has g lass components that could break into pieces with sharp edges.
• Anyone under the age of 18 should not install, maintain or handle this product.
• Never place excessive weight on top of glass canopies, aluminum screens, or tanks, which could cause accidental damage or excessive wear.
• Do not tap, tilt or play with any portion of this product. Glass products require close supervision when used by or near children, but should be kept out of their reach.
• Never lift or attempt to lift the aguadurn/terrarium from the top frame.
• Never lift or move the aquarium/terrarium unless it is completely empty.
• Never lift the aquarium/terrarium unless both hands and the glass are completely dry.
• Never place the tank above electrical equipment.
• Aquarium/terrarium should always be carded from underneath, supporting the bottom at all times.
• Metal algae scrapers or other abrasive substrates can scratch or damage the glasssurface
• The entire bottom frame of the aquarium/terrarium must come in contact with the surface on which it sits. Any gaps between the support surface and the frame can cause flexing and leakage. The frame is best placed on a smooth, flat surface large enough to support its weight when filed.
• If damaged or leaking, immediately move your fish to a different tank and discard the damaged tank.
• For indoor household use only. Do not use or store where it wil be exposed to extreme temperatures (freezing).
• Do not use for anything other than intended use. Never use with flammable or hazardous substances. Do not use accessories a appliances that are not recommended or sold for use with this product. Drilling, cutting, or otherwise modifying this product will void all warranties. Discard immediately if there is any damage.

TERRARIUM INSTRUCTIONS

Sliding screen slides out towards the front of the terrarium. To lock sliding screen in place, secure plastic locking clip along the middle, back edge of the screen and terrarium. Catch the short end of the plastic clip along inner top edge of the screen (just above the mesh screen) and push long end of the plastic clip down flush against side of top Game of terrarium.

GLASS CANOPY INSTRUCTIONS

This glass canopy includes a handy handle, hinge, customizable backstrip, and diamond polished edges for safety.
How to attach the handle: Make sure the glass canopy is on a cushioned, flat surface. Find the best placement of the handle for you (we recommend 1″-1 112″ from the center front edge of the canopy’s front section). Once you pick the perfect spot, remove the paper backing from the adhesive strip on the handle and press it firmly into place. Leave it alone for at least eight hours before using it, so adhesive can set.
How to attach the backstrip: You can easily customize the plastic backstrip to accommodate pumps, airline tubing, heaters, and other tank gear. Place the glass canopy on top of the aquarium (designed to fit Frisco 5.5 Gallon Regular Aquarium) so that the section with the handle is facing the front, and the backstrip is towards the back. With glass canopy in place, determine your intended placement of tank gear along the back of the aquarium and measure the amount of space needed. Mark out the desired space to be cut on the backstrip, then camfully slide it off the glass. Cut the plastic in line with the markings and then slide the backstrip back into position. You can then place the canopy back on the aquarium.

BETTA AQUARIUM INSTRUCTIONS

Aquarium indudes a glass canopy and glass dividers. Glass has diamond polished edges for safety.
Glass canopy: Make sure the glass canopy is on a cushioned, flat surface. Find the best placement of the handle for you (we recommend 1″-1 14″ from the center front edge of the canopy’s front section). Once you pick the perfect spot, remove the paper backing from the adhesive strip on the handle and press it firmly into place. Leave it alone for at least eight hours before using it, so adhesive can set.
Glass Dividers: Your fish will be safe and easy to view with the included glass divider(s) that can be slid into a one-piece, pre-slotted frame to separate up to 2-3 betta fish (depending on aquarium model). Dividers have diamond polished edges for safety. To install the glass divider(s), remove the glass from packaging and carefully slide it into place in the pre-slotted frame. Your aquarium can then be customized as desired. Bottom edges of dividers can be anchored with substrate of your choice fora habitat that alows your fish to co-exist safely in the same aquarium.

Questions or concerns? Get help from our experts 24/7 @ 1-800-672-4399

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>