Drawing 1 – Mounting strap preparation

Drawing 1 – Mounting strap preparation

Drawing 1 – Mounting strap preparation

Drawing 2 – Mounting strap installation

Drawing 3- Shade install

start here empezar aquí commencez ici

1. HINKLE
   Y Wall Mounting Instructions English Spanish French Techo Pan Instrucciones de montaje Plafond Pan Instructions de montage
   Drawing 1 – Mounting strap preparation
   Find a clear area in which you can work.

2. Unpack fixture and glass from carton.

3. Carefully review instructions prior to assembly

4. Prepare mounting strap (A) by threading two machine screws (B) (provided), into back of gull wing section of mounting strap (A) – see Drawing 1.
   • Be sure the holes into which the screws are threaded match the spacing of holes (D) in the back plate (1) – see Drawings 1 and 2.

5. Attach mounting strap (A) to junction box (J), (mounted in wall) using two (8-32) screws 1” long (C), NOT PROVIDED – see Drawing 2.

SAFETY WARNING: READ WIRING AND GROUNDING INSTRUCTIONS (I.S. 18) AND ANY ADDITIONAL DIRECTIONS. TURN
POWER SUPPLY OFF DURING INSTALLATION. IF NEW WIRING IS REQUIRED, CONSULT A QUALIFIED ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE

REQUIREMENTS.

Make electrical connections from supply wire to fixture lead wires. Refer to instruction sheet (I.S. 18) and follow all instructions to make all necessary wiring connections. Then refer back to assembly
instructions for the purchased fixture to complete any assembly required.

1. To attach fixture to the wall slip screws (B), in the mounting strap (A), through holes (D) in backplate (1) – see Drawing 2.
2. Thread on barrel knobs (F) and tighten till canopy is flat against the wall.
3. To complete assembly, attach shade to fixture by first threading the socket ring (1), off of the socket – see Drawing 2.
4. Next slip socket ( through the small hole in the bottom of the shade (2).
5. Now thread socket ring (1) back onto socket, locking shade into place.
6. Fixture can now be lamped with an E26 base bulb (4)

I.S. 18 wiring grounding instructions

SAFE TY WARNI NG: READ WIRIN G AND GR OUNDING INSTRUCTIO NS (IS 18) AND ANY ADDITIONAL DIRECTIONS. TURN POWER SUPPLY OFF DURING INSTALLATION. IF NEW WIRING IS REQUIRED, CONSU LT A QUALIFIED ELECTRICIAN OR LOCAL AUTHORITIES FOR CODE REQUIREMENTS

Drawing 1 – Flus h M ount

\

Drawing 3 – Post-M ount

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>