EATON SA304013EN EnviroShield Wireway Flyer User Manual
- June 3, 2024
- EATON
Table of Contents
SA304013EN EnviroShield Wireway Flyer
User Manual
EnviroShield Type 3R wireway
Protect your investments
Designed for speed of installation, the EnviroShield™ NEMA Type 3R quick-
connect™ wireway is UL listed and CSA certified. The enclosed system protects
wire and cable against even the most extreme outdoor conditions, while a pad-
lock feature maximizes safety and theft protection
Environmental protection and safety
- Helps prevent against cable degradation that can be caused by UV rays, wind, rain, sleet, snow, and salt spray, as well as protecting the cables from insects, rodents, and birds.
- Provides a safe electrical system by eliminating exposed live cables.
Designed for longer outdoor life
The EnviroShield system materials and finishes are designed to help provide a
long life in outdoor environments.
We offer two options:
- Aluminum material with stainless steel hardware providing a light-weight solution with enhanced corrosion resistance
- Galvannealed steel with an ANSI 61 gray electro-coated paint and zinc plated hardware
Packed with features and benefits
- Patented Z-slot design helps eliminate loose hardware – making installation a snap
- Quick install – Wireway straight sections and fittings are joined together by sliding a connector, end cap, or end flange into place
- Nuts are no longer required to join the system, instead our solution features pre-installed combo head bolts that are tightened from the outside of the wireway
- Quick access to cabling with removable hinge cover and lay-in cabling system
- Cable pulling and feeding is not required
- Cable runs can be routed, terminated, and then lifted into place
- Swing-gate connectors and removable hinge cover allow for an interference free installation
- Ideal solution for future expansion
Allows for quick and easy direction and size changes
With pre-engineered fittings, such as 90 degree elbows, tees, crosses,
reducers, end caps, and end flanges, installers can make direction and size
changes without field fabrication or product modification. Pre-engineered
fittings promote a consistent, robust, uniform wire management system without
compromising the UL listing or environmental integrity. 
Specialized fittings allow for expansion and contraction
Specialized fittings allow our system to absorb the impacts of material
expansion and contraction. Just leave a little cable slack, and let the
EnviroShield Type 3R Wireway Systems take care of the rest.
Maximizes security and theft prevention
The enclosed system and the integrated pad-lock features on our wrap-around
connector help provide increased levels of theft prevention and security.
Flexible cable management
The system can be used to house various AC, DC and communication cables.
Through use of a separation barrier, power and communication cables can be
installed within the same wireway.
Stocked and available
Common sizes are stocked and readily available.
Increases your return on investment
While many of these benefits are difficult to quantify, we have quantitatively
assessed the minimum benefits that should be expected from the quick-connect
method.
To determine this benefit, we conducted time studies to compare the quick-
connect connection method to the industry standard wireway connectors and
found the following results:
Wireway Size| Traditional Wireway Connector| Quick-Connect
Method| Labor Savings
---|---|---|---
RSMeans Min/Piece| RSMeans # Installers| Labor S/Piece|
Tested Labor
Min/Piece S/Piece| Labor
% Savings| Savings S/Piece| Savings $/100 Pieces
4″ x 4′ 12| 1
2| 12
32| 10.3 10.3| 14.2
20.6
17.5| 130
6.60
8.40| 170
660
840
6″ x 6′ 16| 12.7 25.4
8″ x 8′ 24| 2| 48| 19.8 39.6a
- “Electrical Cost Data” RSMeans, 29th Annual Edition, 2011
Subject to change without notice.
Eaton is a registered trademark.
All other trademarks are property of their respective owners.
Follow us on social media to get the latest product and support information.