GAGGENAU VG415215AU 400 Series Vario Gas Cooktop Installation Guide
- June 16, 2024
- Gaggenau
Table of Contents
**GAGGENAU VG415215AU 400 Series Vario Gas Cooktop Installation Guide
**
Color Variants
- VG415215AU
- Stainless steel
- Width 38 cm
Included accessories
- 1 x WOK attachment ring.
Optional accessories
- WP400001
- Wok pan made of multiple-layer
- material
Installation Accessories
VA420004
Connection strip for combination with other Vario appliances of the 400 series
for flush mounting
VA420010
Connection strip for combination with other Vario appliances of the 400 series
for surface mounting
VA440010
Stainless steel appliance cover with mounting strip
- VG415215AU
- Vario gas wok 400 series
- Stainless steel
- Width 38 cm
- Natural gas 10 mbar
- Wok burner with up to 18MJ
Three-ring burner with up to 5 KW Full electronic power level regulation on 12
levels
Solid stainless steel knob, also selectable with black robust finishing, for
precise control and personalisation Precision crafting of 3 mm stainless steel
For surface mounting with a visible edge or for flush mounting Precise and
reproducible flame size Automatic fast ignition, electronic flame monitoring
with automatic re-ignition Simmer function for cooking on a very low output
level Can be combined perfectly with other Vario appliances of the 400 series.
Cooking zones
1 multi-ring wok burner with 18 Mj/h, suitable for pots up to max. ø 32 cm.
Handling
Control knobs with illuminated ring, cooking zone and output level markings.
One-handed operation.
Full electronic control in 12 output levels for exact power level regulation
plus simmer function. Automatic fast ignition.
Features
Simmer function.
Cast iron pan support with flat, continuous pot surface. Brass burner ring(s).
Safety
Electronic flame monitoring with automatic re-ignition.
Residual heat indicator. Safety shut-off.
Planning notes
Depending on the type of installation (surface-mounted or flush-mounted, with
or without an appliance cover), the specific location of the cut-out and the
knob positions may vary.
The drawing “Installation of the control knob” must be observed if the panel
is more than 23 mm thick (there must be a recess at the rear).
If combining several Vario appliances of the 400 series, a connection strip VA
420 must be placed between the appliances. Depending on the type of
installation, the corresponding connection strip must be provided.
The bearing capacity and stability, in the case of thin worktops in
particular, must be supported using suitable substructures. Take into account
the appliance weight and additional loads.
Additional instructions for flush mounting:
Installation is possible in worktops made of stone, synthetics or solid wood.
Heat resistance and watertight sealing of the cut edges must be observed.
Concerning other materials please consult the worktop manufacturer.
The groove must be continuous and even, so that uniform placing of the
appliance on the gasket is ensured. Do not use discontinuous lining.
The joint width may vary due to size tolerances of the combinations and of the
worktop cut-out.
Characteristics
Product name/family
Vario/Domino gas hob
Built-in / Free-standing
Built-in
Energy input
Gas
Total number of positions that can be used at the same time
1
Min. required niche size for installation (HxWxD)
134 x 360 x 492
Width of the appliance
380
Dimensions (HxWxD)
158 x 380 x 520
Dimensions of the packed product (HxWxD)
300 x 500 x 600
Net weight
14.5
Gross weight
16.5
Residual heat indicator
separate
Location of control panel
External control
Basic surface material
brushed stainless steel
Color of surface
Stainless steel, Stainless steel
Color of frame
Stainless steel, Stainless steel
Length electrical supply cord
140.0
EAN code
4242006306267
Gas connection rating
5000
Fuse protection
2
Voltage
220-240
Frequency
Included accessories
1 x WOK attachment ring
Consumption and connection features 2023-06-22 Page 1
If installing several appliances in individual cut-outs allow for a division
bar of minimum 50 mm between the individual cut-outs.
Special nozzles can be ordered as spare parts.
Plan for an electrical connection (the appliance is not operable without power
supply).
Air intake from above.
No intermediate shelf required.
Rear panel and wall trims must be heat-resistant and consist of a nonflammable
material.
A minimum clearance of at least 150 mm from adjacent heat-sensitive furniture
or contact surfaces must be observed or thermal insulation fitted.
If operated next to the downdraft ventilation VL 414, the ventilation moulding
AA 414 is recommended to ensure maximum performance of the cooktop.
With a total connected load of more than 39.6 MJ/h local regulations
concerning room ventilation, room size and combination of extraction or
recirculation hoods must be observed. Minimum clearance between gas cooktop(s)
with more than 39.6 MJ/h (11kW) and ventilation hood 70 cm.
The minimum distance between the cooktop surface and a cabinet above, out of
combustible material, needs to be 70 cm.
The minimum distance to a ventilation above is shown at the planning hints for
the individual ventilation product. Appliance can be snapped into the worktop
from above.
Appliance weight: approx. 14.
Connection
Total connected load gas 18.0 MJ/h Total connected load electric 15.0 W.
Connecting cable 1.4 m with plug.
- VG415215AU
- Vario gas wok 400 series
- Stainless steel
- Width 38 cm
- Natural gas 10 mbar
- Wok burner with up to 18MJ 2023-06-22 Page 2
Cross-section
A: 3.5-0.5
6.5*0.5in combinations with frameless induction hobs
B: Fill with silicone
When installing with appliance cover, pay attention to the deeper cut-out and
the front and rear groove width.
measurements in mm
Installation with appliance cover, surface mounting
measurements in mm
**Installation with appliance cover, flush mounting
**
measurements in mm
View from above
A: When installing with appliance cover, take the deeper cut-out into consideration (observe separate planning notes).
measurements in mm
Longitudinal section
A: 3.5-05
6.5*05in combinations with frame less induction hobs
B: Fill with silicone
measurements in mm
A: When installing with appliance cover, take the deeper cut-out into consideration (observe separate planning notes).
measurements in mm
- VG415215AU
- Vario gas wok 400 series
- Stainless steel
- Width 38 cm
- Natural gas 10 mbar
- Wok burner with up to 18MJ
- 2023-06-22
- Page 3
**Installation with appliance cover, flush mounting
**
A: 3.500
measurements in mm
**Installation with appliance cover, surface mounting
**
measurements in mm
**Installation of the control knob; surface mounting
**
measurements in mm
**Installation of the control knob; flush installation
**
measurements in mm
Documents / Resources
|
GAGGENAU VG415215AU 400 Series Vario Gas
Cooktop
[pdf] Installation Guide
VG415215AU 400 Series Vario Gas Cooktop, VG415215AU, 400 Series Vario Gas
Cooktop, Vario Gas Cooktop, Gas Cooktop, Cooktop
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>