allen roth 81027 3-Light Painted Gold Modern-Contemporary Vanity Light Installation Guide

allen roth 81027 3-Light Painted Gold Modern-Contemporary Vanity Light

ALLEN + ROTH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.

Thank you for purchasing this allen + r o t h p roduct. We’ve created these easy-to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page. If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 1-866-439-9800, 8 a.m. – 8 p.m., EST, Monday – Sunday.You could also contact us at partsplus@lowes.com or visit www.lowespartsplus.com.

TROUBLESHOOTING

PROBLEM

1. The fixture does not light.

POSSIBLE CAUSE

1. The bulb is burned out
2. The power is off.
3. Faulty wire connection
4. Faulty switch

CORRECTIVE ACTION

1. Replace the bulb
2. Make sure the power supply turns on
3. Check wiring
4. Test or replace the switch

CARE AND MAINTENANCE

1. Shut off main power supply before performing any maintenmance on the light.
2. Wipe with damp cloth or use window cleaner. Do not use adrasives

WARRANTY

The manufacturer warrants this product against defects in materials and workmanship for three (3) years from the date of purchase. If within this period
the product is found to be defective in material or workmanship, please contact the manufacturer. A copy of the original sales receipt will be required as
proof of purchase. The manufacturer will, at its option, repair or replace the product. This warranty does not cover fixtures becoming defective due to misuse, accidental damage, improper handling and/or installation and specifically excludes liability for direct, incidental or consequential damages. As some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary from state to state.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product Estimated Assembly Time: 10 – 15 minutes

TOOLS REQUIRED

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

1. Before beginning installation, turn off electricity at the circuit junction box or the main fuse box
2. Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires to contact any surface having a sharp edge. To do so may damage or cut the wire insulation, which could cause serious injury or death from electric shock

CAUTION

1. All electrical connections must be in agreement with local codes, ordinances or the national electric code(NEC). Contact your municipal building department to learn about your local codes, permits and/or inspections
2. Consult a qualified electrician before installation

PACKAGE CONTENTS

HARDWARE CONTENTS

Note : Hardware shown actual size

INSTALLATION OVERVIEW

1. Turn off power source
2. Save E for later use.
3. Outlet Box
4. Connect wiring: WHITE to WHITE, BLACK to BLACK, BARE/GREEN to BARE
5. Make sure no bare wire or wire strands are visible after making connections.
6. A can be installed with the socket facing up or down.
7. Do not overtighten D as shade may crack or break.

References

• Lowe's Parts Plus

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>