FLUKE 2AC Non-Contact Voltage Tester User Guide
- June 9, 2024
- FLUKE
Table of Contents
FLUKE 2AC Non-Contact Voltage Tester
Key features
- Non-contact voltage detection from 90 to 1000 V AC
- Innovative ‘Battery Check’ ensures battery is in good condition*
- Integrated clip design, optimized for pocket storage
Product overview: Fluke 2AC Non-Contact Voltage Tester
- Always on for faster, safer voltage testing
- The Fluke 2AC is the latest addition to the VoltAlert™ AC non-contact voltage tester family. It is designed to be pocket-sized and easy to use. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. The 2 AC is always on, with a battery check function to make sure the tester is working properly.
- Your first-choice tool for go/no-go testing
The 2AC tests for energized circuits and defective grounds, whether it’s for an electrician on the factory floor or the do-ityourselfer around the house.
- CAT IV 1000 V overvoltage rated product for best in class user protection
- Suitable for a wide range of residential, commercial and industrial needs
- Fluke ruggedness and reliability with a two-year warranty
Use of Battery Check function is optional and for convenience only, it is not intended as a substitute for checking the unit on a known live source before and after use.
Specifications: Fluke 2AC Non-Contact Voltage Tester
Specifications
Operating Principles
| Senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip indicates the presence of voltage.
Safety Compliance
| Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and
ISA-82.02.01 Pollution Degree 2
EMC Compliance| Meets IEC 61326-1:2006
Operating| 90 V AC to 1000 V AC, CAT IV 1000 V rated
Temperature (Operating and Storage)| ****
-10°C to 50°C (-14°F to 122°F)
Operating Humidity Ranges
| 0% to 95% (0°C to 30°C)
0% to 75% (30°C to 40°C)
0% to 45% (40°C to 55°C)
Altitude| 2000 m (CAT IV 1000 V)
Cleaning| Clean with damp cloth
Battery Life| Typical battery life of greater than one year
Warranty Period| Two years
Ordering information
FLK2AC/90-1000V
- Fluke 2AC VoltAlertTMElectrical Tester
- 90-1000V, straight tip for North American style outle
Fluke. Keeping your world up and running.® Fluke Corporation PO Box 9090,
Everett, WA 98206 U.S.A.
For more information call:
In the U.S.A. 800-443-5853
In Canada (800) 36-FLUKE
From other countries +1
425-446-5500
www.fluke.com
©2022 Fluke Corporation.
Specifications subject to change without notice. 03/2022
Modification of this document is not permitted without written permission from
Fluke Corporation.
4 Fluke Corporation Fluke 2AC Non-Contact Voltage Tester
https://www.fluke.com/en-us/product/electrical-testing/basic-testers/fluke-
2ac
References
- Fluke Corporation: Fluke Electronics, Calibration and Networks
- Fluke Voltage Detector Pen: 2AC Non-Contact Voltage Tester | Fluke