SONANCE PS-S83T Professional Series 8 Inch Surface Mount MKII Woofer Instruction Manual
- June 9, 2024
- Sonance
Table of Contents
SONANCE PS-S83T Professional Series 8 Inch Surface Mount MKII Woofer
FITTING AND REMOVING THE GRILLE
- When installing the grille, align the grille trim skirt with the groove in the enclosure.
- To lock the grille in place apply pressure at the locations of the four grille retention clips. An audible click should be heard as the grille locks into place.
NOTE
To remove the grille, we suggest starting in any one of the four corners using a grille-pulling tool (not included). Once the grille is pulled out past the retention clip in one corner, the remainder of the grille can be removed by working for your hand around and lightly pulling outward, being careful not to bend the grille skirt. If the grille skirt does become bent during removal, it can be straightened by carefully bending it back into its original shape.
©2022 Sonance. All rights reserved. Sonance is a registered trademarks of Dana Innovations. Due to continuous product improvement, all features and specifications are subject to change without notice. For the latest Sonance product specification information visit our website: www.sonance.com
SONANCE
- 991 Calle Amanecer San Clemente, CA 92673 USA
- PHONE: 949-492-7777
- FAX: 949-361-5151
- Technical Support: 949-492-7777
- www.sonance.com
02.23.2022