COUGAR PURITY Mini Tower Case User Manual
- June 9, 2024
- Cougar
Table of Contents
PURITY Mini Tower Case
User Manual
PURITY
Assembly Drawing
A Power button / Reset button
B USB 3.0 / USB 2.0 / HD audio ports
C Front panel
D Left side panel
E Right side panel
F 3.5″ HDD tray (compatible for 2.5″ SSD/HDD)| G Air filter for top panel
H Air filter for front panel
I Air filter for bottom panel
J 2 x 120mm fans for front panel (optional)
K 2 x 120mm fans for top panel (optional)
L 1 x 120mm Black fan for rear panel (pre-installed)
---|---
I/O Connectors
| Model Name | Purity |
|---|---|
| Case Form Factor | Mini Tower |
| Motherboard Type | Mini ITX / Micro ATX |
| Dimension | 200(W) x 392(H) x 360(D) (mm) |
7.9(W) x 15.4(H) x 14.2(D) (in)
I/O Panel| USB 3.0 x 2, USB 2.0 x 1, Mic x 1
Audio x 1, Reset Button
Case Drive Bays| 3.5″ : 2
2.5″ : 2+2 ( converted from 3.5″ drive bays )
Expansion Slots| 4
Cooling Fan Support| Front : 120mm x 2
Top : 120mm x 2
Rear : 120mm x 1 ( 120mm Black fan x 1 pre-installed )
Maximum Number of Fans| 5 Max.
Water Cooling Radiator Support| Top : 240mm / 120mm ( Max.
component height on motherboard is 34mm )
Rear : 120mm
Max. Graphics Card Length| 305(mm) / 12(in)
Max. CPU Cooler Height| 160(mm) / 6.3(in)
Max. PSU Length| 160(mm) / 6.3(in)
FEATURES
- Pure and elegant front panel design
- Support for Micro ATX / Mini ITX motherboards
- Up to 305mm graphics cards
- Up to five fans and 160mm CPU cooler
- Up to a 240mm water cooling radiator
ACCESSORY KIT
| 3.5″ HDD screws| X 8
---|---|---
| Motherboard screws and 2.5″ SSD screws| X 17
| Power supply screws| X 7
| Stand-off| X 3
| Fan screws| X 8
| Cable ties| X 4
GLOBAL WARRANTY POLICY
WARRANTY PERIODS OF COUGAR GAMING DEVICES
Product : COUGAR Purity
Warranty : 1 Year
- This warranty gives you specific legal rights. You may also have other rights granted under local law. These rights may vary.
- Only for electrical components.
Removing side panels
Installing water cooling radiators & cooling fans
Installing the 2.5″ SSDs
-
Please insert the 2.5″ SSD holes to the bottom tabs, and then use 2 screws to tighten it on the top.
-
The 2.5” SSD at this place only supports for the thickness of 7mm.
-
Please install the 7mm thickness of 2.5” SSD in the direction of the arrow, and use 3 screws to tighten it.
Installing the 3.5″ HDDs
Installing PCI-E cards
Support for graphics card up to 305mm-longhttps://cougargaming.com/
COUGAR USA Technical Service
Tel: 833-256-3778
Mail:[email protected]
Compucase Enterprise Co.,Ltd.
All rights reserved. Made in China