tuya TM-YD001W Smart Motion Sensor Night Light User Manual
- June 9, 2024
- Tuya
Table of Contents
- tuya TM-YD001W Smart Motion Sensor Night Light
- Product Description
- Distribution network key function
- Product Features
- Technical Parameters
- Download APP and connect
- SET UP ROUTER
- CONFIGURE NETWORK FOR
- Product installation
- FCC STATEMENT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
tuya TM-YD001W Smart Motion Sensor Night Light
Model: TM-YD001W
Product Description
Front View
Right Elevation
Distribution network key function
- Press and hold for 3 seconds (the white light flashes slowly in a breathing state) to enter the network distribution mode
- short press to turn off the light >> press the sensor night light mode again >> pres the third time to turn on the light.
Product Features
- Intelligent human body induction night light energy saving and environmental protection.
- The human body detection angle is 120°, and the sensing distance is about 5 meters.
- Five-color light APP intelligent adjustment.
- The function of the network distribution key: long press for 3 seconds (the white light flashes slowly in a breathing state) to enter the distribution network mode.Short press to turn off the light >> press the sensor night light mode again > press the third time to turn on the light.
- Direct power supply from a socket.
Technical Parameters
- Rated Voltage: AC 110-240V
- Induction Angle: 120°
- Sensing Distance: 5M
- LED Light Power: 0.45W*6
- WIFI: 1EEE802.11 b/g/n (2.4 g)
Download APP and connect
Tuya Smart is available for both 10S and Android. Search the name “Tuya Smart” in app store or scan the QR code to download the app.
Support
SET UP ROUTER
Night light only supports 2.4GHZ wifi router, not 5GHZ router, please set the relevant parameters of the router before WIFl configuration. WIFI passwords are not allowed to contain special characters such as @#$%^&*0 etc. When configuring wifi for the night light, please keep the mobile phone and night light as close as possible to the router to speed up thee configuration of the night light.
Please keep network available
APP Registration
Open the Tuya Smart app, click “Register”, read the “Privacy Policy” and click “Agree”. Input a legal and valid mobile number or email address, then click “Continue”. And enter verification code then log in the APP.
CONFIGURE NETWORK FOR
- First, turn on “Bluetooth” on the mobile phone, then open the APP, and click the “Add Device” or “+” icon to add a device; at the same time, long press the pairirng button of the induction night light, and the light flashes slowly to enter the pairing state. At this point, the APP pops up a device discovery pop-up window.
- Click “Add” >> “+”, select the connected WIFI and enter the password, click “Next”, wait for the device to connect, after the device is Successfully connected. You can click the “ ” icon to rename the device name, and click Finish in the upper right corner.
- On the home page of the APP, click to enter to set various functions of the sensor light, such as colored light, white light, scene, motion detection, timing switch, etc.; Note: When the motion detection mode is turned on, the color and brightness of the light cannot be adjusted. (you can adjust the color first)
- On the home page of the APP, long press the device icon to enter the device management window, select the device that needs to be removed, click”Remove device” pop-up to Confirm the removal of the device, click OK to complete the removal of the device.
Product installation
- The induction lamp can be inserted into indoor wall panel or household row.
CAUTION
- This product is not a waterproof test, please do not use in a wet environment.
- Do not use this product as a toy for children in case of accidents.
- This product is strictly prohibited to disassemble, so as not to cause damage or danger.
- Do not cover the light-sensitive sensor head, or it will lead to functional failure.
- This product has 3 meters sensing distance for the All Black Environment Test, if the semi-dark environment or the sensor head has other objects in front of the shelter, will affect the sensing effect.
- This product may be subject to transient failure in the following environments, such as shorter sensing distance, reduced sensitivity, product often bright or not bright, etc.. humid air conditioning, fan outlets kitchen lamps near heat sources extremely cold in winter or hot in summer
- The light source in this lamp should be replaced by the manufacturer or its service agent or a person with similar qualifications. Warning! Electric Shock!
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>