VolTect TIC 300 Pro High Voltage Detector User Guide
- June 7, 2024
- VolTect
Table of Contents
** Meet The New Standard
In Non-Contact, High Voltage Detection
The Amprobe TIC 300 PRO with VolTect™**
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll-Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com
AMPROBE
TIC 300 PRO with VolTect’ Quick Start Guide
On/Off
When the TIC 300 PRO is activated. the blue LED and audible alert will pulse
at a slow rate. approximately twice per second.
LOW Range Setting
- Push the ON/OF F button to turn the unit ON. The unit will default to the high voltage setting when powered up.
- Push the LOW range button, and the unit is ready for low voltage detection.
- Place the probe tip near. but not touching. the low (<10001f) voltage source. See the bottom table for range details.
- If voltage is present. the blue LEDs and audible alerts will pulse at an increased rate.
Low Range Setting
Voltage (Phase to Ground)| Detection Distance (from the energized
line) Average
---|---
30 V| 1.5″
75 V| 6.5″
100 V| 8.5″
120 V| 10″
220 V| 1’1″
500 V| 1’7″
1000 V| 2’10”
1500 V| 7.9″
Self-test
The TEST button should be used to ensure the tool is operational. The TEST
function will cause the blue LEDs and audible alerts to pulse at a continuous
rate on either LOW or HIGH range settings.
HIGH Range Setting
(> 1500V and <122 kV) (Must use with TIC 410A Hot Stick Attachment)
- Push the ON/OFF button to turn the unit ON. The unit will default to the high voltage setting when powered up.
- Approach the probe tip near, but not touching, the high voltage conductor. See the bottom table for range details.
- If voltage is present, the blue LEDs and audible alerts will pulse at an increased rate.
High Range Setting
Voltage
(Phase to ground) 1| Detection Distance
Average
---|---
1.5 kV| 1’2′
2.0 kV| 2′ 5′
4.0 kV| 3″
10.0 kV| 6’3″
25.0 kV| 9’4′
50.0 kV| 13’0′
75.0 kV| 14’8′
100.0 kV| 19’8′
122.0 kV| 22’0′
For complete information on the TIC 300 PRO, visit amprobe.com
Meet The
New Standard
In Non-Contact, High
Voltage Detection
The Amprobe TIC 300 PRO with VolTecr Non-Contact High Voltage Detector
Key Features
- Bright visual and loud audible voltage indication
- Self-test verifies that the tool is operational
- Push-button functionality for ease of use with PPE gloves
- Intrinsically safe and MSHA certified
- Low range setting: 30V ac g 1,500V ac
- High range setting: 1,500V ac g 122,000V ac (must use with TIC 410A Hot Stick Attachment)
Test Equipment Depot – 800.517.8431 – 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com
4159996 B
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>