Aqara H1 Wireless Remote Switch User Manual

: June 4, 2024
: Aqara

Table of Contents

H1 Wireless Remote Switch
Read User Manual Online (PDF format)
Download This Manual (PDF format)

H1 Wireless Remote Switch

Product Overview

The Aqara Wireless Remote Switch H1 (Double Rocker) is a new wireless remote switch. It supports single press in the high-speed click mode, and 7 functions in the multi-function mode including single press left button, single press right button, double press left button, double press right button, long press left button and long press right button. It is able to be placed or attached anywhere indoors. It also works with the Aqara hub and other Aqara smart devices to implement a variety of smart scenes.

An Aqarahub is required. Some functions require specific models of the Aqara hub. Please visit www.aqara.com/support for more details.

Quick Setup

This product works with Aqara Home app. You can scan the following QR code to download the Aqara Home app from the Apple App store. Android users can find the Aqara Home app on Google Play. With the Aqara Home app, it can work with other Aqara smart devices.

Before activating the accessory, please make sure you have
downloaded the Aqara Home app and the Aqara hub that
supports Zigbee 3.0 installed.
Please open the app, go to the homepage and select “+” in the top
right corner to enter Add Accessory page. Select “Aqara Wireless
Remote Switch H1 (Double Rocker)” and add it according to the
instructions.
Please visit www.aqara.com/support for more information.

If adding fails, please move the hub closer to the product and try again.
Press the switch quickly for 5 times, if the hub makes voice prompts, it indicates
that the accessory can communicate effectively with the hub.
Different hubs have different ways to indicate the effective connection. Please
refer to the instructions of your model of the Aqara hub.

Installation Methods

Effective Range Test: After it is bound with the hub, put the device at
the preferred location and press the button of the device quickly for
5 times, if the hub makes voice prompts, it indicates that the
accessory can communicate effectively with the hub.
To ensure stable connections, please avoid setting up the device on metallic
surfaces.

Option 1:
Adhesive-free, place it on a surface directly.

Option 2:
Remove the protective film from the adhesive tape and attach the
device on the desired surface.

Please keep the surface clean and dry.

Option 3:
Open the back of the Wireless Remote Switch H1 (Double Rocker) with a flat- blade screwdriver, drill through the thin piece at the screw of the back cover with a sharp tool or an electric drill (Attention! Make sure you are drilling the back cover, not the main part of the switch that incorporates hardware and buttons), fix it to the wall box with the screw that comes with the box, and then put the cover of the Wireless Remote Switch H1 (Double Rocker) back.

1. Open the back of the Wireless Remote Switch H1 (Double Rocker) with a
screwdriver.

2. Drill through the back cover with an awl/electric drill to install the screw.

3. Fix the screw and put the cover back.

Battery Replacement

Open the back of the Wireless Remote Switch H1 (Double Rocker) with a flat- blade screwdriver, remove the old battery and replace it with a new battery (battery model: CR2450), and then put the cover back.

1. Open the cover of the Wireless Remote Switch H1 (Double Rocker) with a
screwdriver.

2. Replace with new battery.

3. Put the cover back.

Switch Modes

On the Device page on the app, find the corresponding device in the device list.
Select the corresponding device to enter the page of the device.
Select the three black dots on the upper right corner on the page of the device and enter the Device Settings page.
Select More Settings.
Select Switch Modes, select the desired mode, and complete the corresponding configuration according to the instructions on the app.

When the corresponding device is not found, you can quickly press the switch 5
times, and the corresponding device will flash in the Device list.
During the mode switching process, quickly press the switch 5 times to better
realize the device mode switching.
To implement the above steps, please refer to Aqara Home app.

Indicator Status Description

Indicator Status	Description
Blue light flashes once

Button press detected

Flash once every 2s for 20s| Binding
Blue light flashes 2 times|

Bound successfully

Continuous blue for 1s| Failed to bind

Specifications

Model: WRS-R02 Weight: 82.5 g
Item Dimensions: 85.8 × 86 × 12.5 mm
Wireless Connectivity: Zigbee 3.0
Battery Model: CR2450
Operating Temperature: -10°C to 50°C
Operating Humidity: 0-95% RH, no condensation
Zigbee Frequency Range: 2405-2480 MHz
Zigbee Power Transmission: ≤13 dBm

Warnings

This product is not a toy, please keep children away from this product.
This product is designed for indoor use only. Do not use it in
humid environment or outdoors.
Do not spill water or other liquids on this product.
Do not place this product near a heat source. Place the switch in a well ventilated area.
Do not attempt to repair the product by yourself. All repairs should be performed by authorized personnel.
This product is designed only for improving the convenience of
household life. If the user violates the product instructions and
this warning, the manufacturer is not responsible for any risks
and property losses caused thereby.

Online Customer Service: www.aqara.com/support
Email: support@aqara.com
Manufacturer: Lumi United Technology Co., Ltd.
Address: 8th Floor, JinQi Wisdom Valley, No.1 Tangling Road,
Liuxian Ave, Taoyuan Residential District, Nanshan District,
Shenzhen, China 10

EU Declaration of Conformity

Hereby, [Lumi United Technology Co., Ltd.] declares that the radio
equipment type [Wireless Remote Switch H1(Double Rocker), WRS-R02] is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
http://www.aqara.com/DoC/

CAUTION

Risk of explosion if the battery is replaced by an incorrect type.
Under normal use of condition, this equipment should be kept a separation
distance of at least 20cm between the antenna and the body of the user.
Dispose of used batteries according to the instructions.
Do not ingest battery, Chemical Burn Hazard.
This product contains a coin / button cell battery. If the coin / button cell battery is
swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and
keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the
body, seek immediate medical attention.

Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of
a battery, that can result in an explosion
Leaving a battery in an extremely high temperature surrounding environment that
can result in an explosion or the leakage of flammable liquid or gas
A battery subjected to extremely low air pressure that may result in an explosion or
the leakage of flammable liquid or gas

WEEE Disposal and Recycling Information

All products bearing this symbol are waste electrical and electronic
equipment (WEEE as in directive 2012/19/EU) which should not be mixed with
unsorted household waste. Instead, you should protect human health and the
environment by handing over your waste equipment to a designated collection
point for the recycling of waste electrical and electronic equipment, appointed by
the government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human health.
Please contact the installer or local authorities for more information about the
location as well as terms and conditions of such collection points.

Symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it shall be
handed over to the applicable collection

UK Declaration of Conformity
Hereby, [Lumi United Technology Co., Ltd] declares that the radio
equipment type [Wireless Remote Switch H1(Double Rocker), WRS-R02] is in
compliance with Directive 2017 (SI 2017 No. 1206, as amended by SI 2019 No. 696).
The full text of the UK
declaration of conformity is available at the following internet address: http://www.
aqara.com/DoC/.