ZipStor 4 Bay eSATA Hard Drive Expander Unit User Guide
- June 9, 2024
- Zip
Table of Contents
Full DVR ManualZipStor 4 Bay eSATA Hard Drive Expander Unit User Guide
User Information
- The ZIPSTOR must be installed in a clean, dry environment where it will not be exposed to high temperatures, moisture or excessive dust
- Do not touch the ZIPSTOR or any of its connections with wet hands.
- Do not attempt to install or use the device if the power supply or eSATA Cables connected are damaged.
The ZipStor is a HDD (Hard Disk Drive) expander unit making it easy to add additional hard disc capacity to your Zip NVR or DVR. The enclosure is designed to match the Zip NVR / DVR it can be situated either on top or below it for a fully integrated look.
An eSATA cable (supplied) is used to link the two devices
VR | NVR Setup
-
In the recorder menu go to Storage> Disk> Disk> Record on eSATA – Select Enable
-
Select Apply then OK
-
The connected eSATA drive or drives will then show in the list
For Full DVR Manual
www.systemq.com/PDF/manual/Zip- DVR-
Manual.pdf
Specifications
| ZIPSTOR
---|---
HDD Bays| 4
MaxHDD| 40TB (4x10TB)
HDD Connection| SATA
DVR / NVR Connection| eSATA
Power| 12V DC
Power Connection| 2.1mm DC Socket
PSU| 5A Supplied
Dimensions| (H) 50 x(W) 378 x(D) 325.8mm
All specifications are approximate. System Q Ltd reserves the right to change product specifications or features without notice. Whilst every effort is made to ensure that these instructions are complete and accurate, System Q Ltd cannot be held responsible for any losses, no matter how they arise, from errors or omissions in these instructions, or the performance or non- performance of the equipment referred to.
Disposal
This symbol indicates that equipment must not be mixed with general household waste. For treatment, recovery and recycling please return to your local designated WEE/CG0783SS collection point as defined by your local council
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>