ZIP IP-CAM890 IP Eyeball iSense Camera Instruction Manual

IP-CAM890 IP Eyeball sense Camera
Instruction Manual

Instruction Manual
IP-CAM890

Introduction

1.1 Key Features – IP-CAM890
Attractive Compact IP Eyeball with Face Recognition & Detection 2.8-12mm IP Eyeball With sense

• ANPR Built-in
• Facial Recognition*
• Micro SD Card Slot
• Audio In – Audio Out
• Human Detect & Vehicle Detect
• Perimeter Intrusion Detect
• Line Crossing Detection
• Stationary Object Detect
• Cross Counting
• Facial Recognition*
• Crowd Density Detect
• Queues Length Detect
• 2.8-12mm Motor lens
• 5MP
• IR
• Perfect for ZIP NVR Kits

1.2 Essential Tools and Zip Finder
To install this product you will need:

• Laptop / Windows PC
• Screwdriver
• Drill
• Hammer
• ZIP NVR or DVR
• Poe Switch / 12V DC power supply
• Ethernet CAT5/5e/6 Cable

Zip Finder – IP Camera Configuration Tool
Zip Finder is a Windows PC software for discovering and configuring IP cameras a network.
Use Zip Finder on non-Poe installs, to help problem solving issues such as forgotten or unknown IP Addresses.

To download visit ZipNVR.com

Connections and Dimensions

2.1 IP-CAM890

Powering the camera
Option 1 – Power the camera from 12V DC (via the 2.1mm DC Socket), the current consumption is 750mA.
The camera is polarity sensitive so connections must be correctly made.
Option 2 – Power the camera using a PoE 48V RJ45 Socket
When connecting ZIP Poe NVR plug the camera directly into the NVRs built in Poe switch.
The camera should automatically become visible after being connected for approximately 1 minute.

Dimensions

Mounting and SD Card Installation

For local recording on the camera itself an SD card must be installed.
Recording time will vary dependent upon: SD card size and encoding settings
32GB SD Card 31 hours
64GB SD Card 62 hours
128GB SD Card (MAX) ≈124 hours
256GB SD Card (MAX)≈ 248 hours
The camera can be set to only record when triggered via motion detection, alarm input or AI smart, this maximizes the recording time achievable.
Remove power from the camera when inserting / removing the SD card.

3.1 Eyeball

A template is provided in the box for marking the hole positions for the fixing screws.

Setup Options

4.1 PoE ZIP NVR
When connecting to a ZIP Poe NVR plug the camera directly into the NVR’s built in Poe switch.
The camera should automatically become visible after being connected for approximately 1 minute.
The 100m distance for a camera can be increased when the Poe Mode is set to Epode.
In the menu on a ZIP Poe NVR go to:-
Video > IP Channels > Poe Mode

4.2 Non-Poe ZIP NVR
When connecting cameras to a Non-Poe NVR , they are first connected to an external network switch which is in-turn connected to the NVR as shown below.

See Extra Resources 20 for more information on Adding IP Cameras manually to a ZIP Recorder.

How to Login via Browser

The AI smart features can be configured in a ZIP recorder or directly in the browser interface of the camera (standalone)
Only one smart detection feature can be enabled at any given time.

See the NVR or DVR manual for information on configuring these features with a ZIP recorder.
Follow the steps below for configuring the settings directly in the camera via a browser for standalone setup.
You will need…

• Windows Based PC/ Laptop connected to router/ Poe switch
•  Zip Vision Pro App on Mobile Device
• Poe Switch connected to Network/ Router
•  Ethernet network cable
• Zip Finder software, available via this link below:

www.softcctv.com/store/Item/Zip-Finder-IP-CCTV-Security-Camera-Discovery- Tool
NOTE If the PC being used is on a different IP range to the PC then add the IP range of the camera to the PC using the below guide:
PDF Version :- http://www.cctvmanuals.com/pdf/tips/How_to_add_an_IP_Range.pdf HTML
Version :http://www.cctvmanuals.com/tips/How_to_add_an_IP_Range/index.html

1. Plug the camera’s RJ45 port with a network cable into a Poe switch
2. Using Zip Finder on a Windows Based PC/ Laptop Search and then tick the camera
3. Select Net Mode = DCHP, then click Modify
4. Search again, to get the updated IP address.
5. Select the IP address of the camera, Internet Explorer will pop-up, and ask to download and install the plug-in.
6. Download, install and follow the steps for the plug-in installation, then re-load the browser by selecting the IP address again.
7. Login to the IP Camera, the default login details are:-

Browser Menu Settings

6.1 IP-CAM890
The menu be configured directly in the browser interface of the camera (standalone), in Remote Setting you will find the menu settings below:-

Refresh / Save
Image Control| IR-CUT Mode| Automatic Mode / Color

Mode / Black White Mode / Image Mode / Schedule

Corridor Mode| Disable / Enable
Angle Trad| 180 / 0
Mirror| Disable / Vertical / Horizontal / All
Exposure Compensation| Disable / HLC / BLC / WDR
White Balance| Automatic Mode / Manual
Shutter| Automatic Mode / Manual
Time Exposure| 1/5 / 1/8 / 1/15 / 1/25 / 1/50 /1/100 / 1/150 / 1/180 / 1/200 / 1/240 / 1/250 / 1/300 /  1/360 / 1/480 / 1/500 / 1/600 / 1/700 / 1/1000 / 1/1500 / 1/2500 / 1/5000 / 1/10000 / 1/12000 / 1/20000
3D Noise Reduction| Auto / Disable / Manual
Refresh / Save / Default
Privacy Mask| Privacy Mark| Untick / Tick
Refresh / Save
ROI| Stream Type| Mainstream / Sub Stream / Mobile Stream
Region ID| 1 ~ 8
Enable Region| Disable / Enable
ROI Level| Lowest / Lower / Low / Medium / Higher / Highest
Non-ROI Fps (1-19)| 12
Refresh / Save
Record| Encode| Mainstream| Resolution| 2880 x 1620 / 2560 x 1440 / 2304×1296 / 1920×1080 / 1280 x 720 / 1280×720
---|---|---|---|---
FPS| 1 ~ 25 (Default  25 )
Video Code Type| H.265 / H.264
Video Code Level| Main Profile
Bitrate Control| CBR / VBR
Bitrate| 256 / 320 / 384 /448 / 512 / 640 / 768 / 896 / 1024 /  1280 / 1536 / 1792 / 2048 / 3072 / 4096 / 5120 / 6144 / 8192
I Frame Interval| 1 ~ 100 (Default 5 0 )
Audio| Enable /Disable
Refresh / Save|
Sub stream| Resolution| 1280×720 / 640×480 / 320×240
FPS| 1 ~ 20 (Default  20 )
Video Code Type| H.265 / H.264
Video Code Level| Main Profile
Bitrate Control| CBR / VBR
Bitrate Mode| Predefined /User Defined
Bitrate| 128 / 160 / 192 / 224 / 256 / 320 / 384 / 448 / 512 /  768 / 1024 / 1536 / 2048 / 3072 / 4096
Audio| Untick / Tick
I Frame Interval| 1 ~ 80 (Default  50 )
Refresh / Save|
 |  | Mobile stream| Enable| Enable / Disable
---|---|---|---|---
Resolution| 640×480 / 320×240
FPS| 1 ~ 20 (Default  20 )
Video Code Type| H.265 / H.264
Video Code Level| Main Profile
Bitrate Control| CBR / VBR
Bitrate Mode| Predefined / User Defined
Bitrate| 128 / 160 / 192 /224 / 256 / 320 / 384 / 448 / 512 / 768 / 1024 / 1536  / 2048 / 3072 / 4096
Audio| Untick / Tick
I Frame Interval| 1 ~ 80 (Default  50 )
Refresh / Save
Record / Capture| Stream Mode| Mainstream  / Sub Stream
Record| Tick / Untick
Prerecord| Tick / Untick
Schedule| Customize Schedule
Refresh / Save / Default
Event| Setup| Motion| Enable| Enable / Disable
Sensitivity| 1 ~ 8 (Default 3 )
Sound Detection| Enable| Enable / Disable
Rise| Disable /Enable
Rise Sensitivity| 1 ~ 100 (Default 50 )
Sound Intensity| 1 ~ 100 (Default  50 )
Decline| Disable / Enable
Decline Sensitivity| 1 ~ 100 (Default  50 )
Save / Schedule / Refresh
Alarm| Motion| Latch Time| 5s / 10s / 20s / 30s
Post Recording| OFF / 5s / 10s / 20s / 30s
 |  |  | Send Email| Enable / Disable
---|---|---|---|---
FTP Picture Upload| Enable /Disable
Cloud Picture| Enable /  Disable
Alarm Out| Enable /  Disable
Enable Record| Enable / Disable
Event Report| Enable /  Disable
Save / Schedule / Refresh
Sound Detection| Alarm Type| OFF / Normally- Open / Normally- Close
Latch Time| 5s / 10s / 20s / 30s
Post Recording| OFF / 5s / 10s /20s / 30s
Send Email| Enable / Disable
FTP Picture Upload| Enable / Disable
Cloud Picture| Enable / Disable
Alarm Out| Enable / Disable
Enable Record| Enable / Disable
Event Report| Enable / Disable
Save / Schedule / Refresh
Event Push| Enable| Enable / Disable
Name| Customize
Push Way| HTTP / UDP
Username| Customize
Password| Customize
Server Address| Customize
Port| Customize  (Default 123)
URL| API/Alarm Event/Event Push
Method| POST / GET
Interval| OFF / 1 Min / 5 Min / 10 Min
Save / Refresh
AI – Setup| FD (Face Detection)| Enable| Enable / Disable
Dynamic Marking| Enable / Disable
 |  | Face Enhance| Optimal Mode / Realtime Mode / Interval Mode
---|---|---|---
Apply Mode| Frontal View / Multi View /Customize
Min Pixel| 32 ~ 1080 (Default 64 )
Max Pixel| 320 ~ 1080 (Default 640 )
Detection Mode| Static Mode / Motion Mode
Rule Kind| Recto ** / Line
Detection Range| Full Screen** / Customize
Save / Refresh
PD & VD

(Person & Vehicle Detection)

| Enable| Enable / Disable
Sensitivity| 0 ~ 100 (Default 60 )
Dynamic Marking| Enable / Disable
Snap Mode| Default / Realtime Mode / Interval Mode
Min Pixel| 64 ~ 1080 (Default 64 )
Max Pixel| 320 ~ 1080 (Default 640 )
Detection Type| Pedestrian & Vehicle / OFF / Person / Vehicle
Detection Mode| Motion Mode / Static Mode
Detection Range| Full Screen / Customize
Save / Refresh
PID (Perimeter Intrusion Detection)| Enable| Enable / Disable
Sensitivity| 1 to 4 (Default 2 )
Dynamic Marking| Enable / Disable
Detection Type| Motion / Pedestrian & Vehicle / Person / Vehicle
Rule Number| 1 to 4
Rule Enable| Enable / Disable
Rule Type| A → B /B →A / A ← → B
Save / Refresh
LCD (Line Crossing Detection)| Enable| Enable / Disable
Sensitivity| 1 to 4 (Default 2 )
Dynamic Marking| Enable / Disable
Detection Type| Motion / Pedestrian & Vehicle / Person / Vehicle
Rule Number| 1 to 4
Rule Enable| Enable / Disable
Rule Type| A → B /B →A / A ← → B
Save / Refresh
SOD (Stationary Object| Enable| Enable / Disable
 | Detection)| Sensitivity| 1 to 4 (Default 2 )
---|---|---|---
Dynamic Marking| Enable / Disable
Rule Number| 1 to 4
Rule Enable| Enable / Disable
Rule Type| Legacy / Lost / Lost & Legacy
Save / Refresh
CC (Cross Counting)| Enable| Enable / Disable
Sensitivity| 1 to 4 (Default 2 )
Dynamic Marking| Enable / Disable
Type| Person / Motion / Vehicle
Alarm Number| 1 to 255
Start Time| User definable
End Time| User definable
Rule Number| 1
Rule Enable| Enable / Disable
Rule Type| A → B /B →A
Save / Refresh / Reset Count
HM (Heat Map)| Enable| Enable / Disable
Rule Number| 1
Rule Enable| Enable / Disable
Save / Refresh
CD (Crowd Density)| Enable| Enable / Disable
Sensitivity| 1 to 4 (Default 2 )
Dynamic Marking| Enable / Disable
Min Pixel| 64 ~ 1080 (Default 64 )
Max Pixel| 320 ~ 1080 (Default 640 )
Max Detection Number| 1 ~ 500 ( 50 )
Detection Range| Customize / Full Screen
Rule Number| 1
Rule Enable| Enable / Disable
Save / Refresh
QD (Queue Depth)| Enable| Enable / Disable
Sensitivity| 1~ 4 (Default 60 )
Dynamic Marking| Enable / Disable
Min Pixel| 64 ~ 1080 (Default 64 )
Max Pixel| 320 ~ 1080 (Default 640 )
Max Detection Number| 1 ~ 500 ( 50 )
Max Pro Time| 1 ~ 3600 (6 0 )
Detection Range| Customize / Full Screen
 |  | Rule Number| 1
---|---|---|---
Rule Enable| Enable / Disable
Save / Refresh
LPD (License Plate Detection)| Enable| Enable / Disable
LDP Enhance| Enable / Disable
Day Time Level| 0~ 255 (Default 220 )
Night Time Level| 0~ 255 (Default 99 )
Sensitivity| 1~ 100 (Default 60 )
Dynamic Marking| Enable / Disable
Snap Mode| Default / Realtime Mode / Interval Mode
Min Pixel| 64 ~ 1080 (Default 64 )
Max Pixel| 320 ~ 1080 (Default 640 )
Detection Type| European license plate / American license plate
Detection Mode| Static Mode / Motion Mode
Detection Range| Customize / Full Screen
Save / Refresh
RSD (Rare Sound Detection)| Enable| Enable / Disable
Sensitivity| 1~ 100 (Default 60 )
Detection Type| Baby Crying Sound / Dog Barking / Gunshot
Save / Refresh
AI Schedule| Customise Schedule
Save / Refresh
Alarm – FD / LPR / PD&VD / PID / LCD / SOD / CC / CD / QD / LPD / RSD| Post Recording| OFF / 5s / 10s / 20s / 30s
Send Email| Enable / Disable
FTP Picture Upload| Enable / Disable
Cloud Picture| Enable / Disable
Alarm Out| Enable / Disable
Enable Record| Enable / Disable
Event Report| Enable / Disable
Save / Schedule / Refresh
Statistics| Human & Vehicle Detection| Select Date & Day / Intelligent / Search / Export
Cross Counting Statistics – Report Type| Daily Report / Weekly Report / Monthly Report / Annual Report
Detection Type| Motion / Person / Motor Vehicle / Non-motorized Vehicle
Cross Type| Cross In / Cross Out
System Time| Select Date
 |  | Column Chart / Line Chart
---|---|---
Heat Map Statistics – Report Type| Daily Report / Weekly Report / Monthly Report / Annual Report
Date| Customise
Start Hour| Customise
End Hour| Customise
Space Heat Map /Time Heat Map
Spatial Density Legend
Search
Network| General| DHCP| Enable / Disable
IP Address| 192.168.10.1| Test
Subnet Mask| 255.255.255.0
Gateway| 192.168.10.254
IPv6 DHCP| –
IPv6 Address| –
IPv6 Gateway| –
DNS 1| 192.168.10.254
DNS 2| –
IPv6 DNS 1| 192.168.10.254
IPv6 DNS 2| –
Multicast Main stream| Enable / Disable
Video Encryption Transmission| Enable / Disable
Save / Refresh
PPPoE| Enable PPPoE| Enable / Disable
Username| User-definable
Password
IP Address
Save / Refresh
SNMP| Enable| Enable / Disable
SNMP Version| User-definable
SNMP Port
Read Community
Write Community
Trap IP Address
Trap Port
Save / Refresh
Port Configuration| HTTP Port| Enable / Disable|
Client Port| User-definable
HTTPS Port
RTSP Port
Multicast Port| 1024 – 65535
P2P Enable| Enable / Disable
 |  | Save / Refresh
---|---|---
Email| Email| Enable / Disable
Encryption| Disable / SSL / TLS / Auto
SMTP Port| 25 / Customize
SMTP Server| Customize
User Name
Password
Sender Email
Receiver1
Receiver2
Receiver3
Interval| 1Min / 3Min / 5Min / 10Min
Refresh / Save / Test
FTP Settings| FTP Enable| Untick / Tick
Server| Customize
Port| 21 / Customize
Username| Customise
Password
DIR Name
Transfer Images| Untick / Tick
Refresh / Save
RTSP Port| RTSP| Tick / Untick
RTSP Port| 1240 / Customize
Anonymous Login| Untick / Tick (No username or password required)
Instruction: rtsp://IP:Port/ch01/A A:0(MainStream), 1(Sub Stream), 2(Mobile Stream)
Refresh / Save
DDNS| DDNS| Untick / Tick
Server| NO_IP / DYNDNS
Host Name| Customized
Username
Password
Refresh / Save
HTTPS| Certificate Type| Default / Custom
Refresh / Save
IP Filter| Enable| Enable / Disable
Filter Mode| Allow all IP connections / Allow the selected IP connections / Block the selected IP connections
Refresh / Save
Storage| Disk| Disk Information
Refresh / Save / Format Hard Disk
Audio| Enable Audio| Tick / Untick
Output Volume| 0 ~ 10 (Default 5 )
Input Volume| 0 ~ 10 (Default 5 )
 |  | Audio Code Type| G711A / G711U / G726 16K
---|---|---|---
Refresh / Save
Cloud| Cloud Storage| Enable / Disable
Cloud Type| Dropbox
Driver Name| Customize (Default IP- PTZ650W )
Refresh / Save / Activate Cloud
System| General| Date and Time| Time Setting mode| Static / NTP server synchronization
Date Format| Day/Month/Year Year-Month-Day Month/Day/Year
Time Zone| GMT -12:00 to GMT + 13:00
Time Format| 24Hour / 12 Hour
System Time| User-definable
Server Address| Time.windows.c om / time.nist.gov / pool.ntp.org / Define User
Save / Synchronize computer time / Refresh
Daylight Saving Time| Daylight saving time| Enable / Disable
Start Time| User-definable
End Time| User-definable
Time Offset| 1Hour / 2 hours
Save / Refresh
Multi-User| Customize Each user| Password (Edit)| Username
Password
Password Strength
Confirm
Refresh
Maintain| Log| Log Type| System / CON. / Alarm /Account /  Record / Storage / Network / All
Start Time| User-definable
End Time| User-definable
Load Default| All / Video / Record/ Event / AI / Network/ Storage / System
Save / Refresh
 |  | Upgrade| Path| Search Local Files
---|---|---|---|---
Save / Load| Import File| Search Local Files
Export File Name| Search Local Files
Auto Reboot| Auto- maintenance| Enable / Disable
Time| Date / Week / Month
Mon / Tues / Wed / Thur / Fri / Sat / Sun
Time
Save / Refresh / Reboot
Information| Device ID
Device Name
Device Type
Hardware Version
Software Version
Web Version
Mac Address
P2P ID
Refresh

Extra Resources

7.1 ZipNVR.com Website
The Zip NVR has a range of information on the cameras and NVRs, manuals, software, tools and support:- www.zipdvr.com

7.2 Adding IP Cameras to a ZIP recorder
How to guide on Adding IP Cameras:- www.zipdvr.com/howto/TIP459-How-To-Add- IP-Cameras.html

7.3 AI Setup
See the ZIP NVR full manual for more information on AI setup;
Note: AI Features will vary depending on model
Full Instruction Manual

https://systemq.com/PDF/manual/xZIP4.pdf

7.4 ZIP Firmware
Firmware for the zip products are available online:- www.zipdvr.com/firmware.html
Compare the firmware in the product against that available online.

General Maintenance

• Routinely clean the camera to prevent dust build up as this can effect the performance of the camera. It is recommended to use a damp non-abrasive microfiber cloth.
• Routinely check the connections for power and data to ensure no water ingress and corrosion.
• Check that the cameras are firmly attached to the wall or mounting bracket.
• Check playback in the recorder to ensure the camera is recording and triggering properly.

Specifications

9.1 IP-CAM890

Vehicle Detection, Facial Detection, Facial Recognition, License Plate Detection
System Compatibility| ONVIF (Profile S, Profile G, Profile T)
Connection| RJ45 10M / 100M Ethernet Poe
SD Card| Micro SD Card Slot (up to 256GB)
Audio (RCA)| 1 Input / 1 Output
Input Voltage| Poe or 12V DC 750mA (PSU Required)
Consumption| 9W Max
Operating Temperature| From -30 to 55 deck
Backlight Control| BLC / D-WDR
Use| IP66 For External Use
Framerate| 25fps (@50hz) / 30fps (@60hz)

Conditions
All specifications are approximate. System Q Ltd reserves the right to change any product specifications or features without notice. Whilst every effort is made to ensure that these instructions are complete and accurate, System Q Ltd cannot be held responsible in any way for any losses, no matter how they arise, from errors or omissions in these instructions, or the performance or non-performance of the equipment that these instructions refer to.

This symbol on the products and/or accompanying documents means that used electronic equipment must not be mixed with general household waste. For treatment, recovery and recycling please return this unit to your trade supplier or local designated WEE/CG0783SS collection point as defined by your local council.

© Copyright 2020
Niter Devil is a registered trademark of System Q Ltd,
Chesterfield. Derbyshire. S40 2WB
© 2023 System Q Ltd
ZipDVR.com

References

• How to add an IP Range to a Windows PC
• Zip Finder - IP Camera Discovery Tool - SoftCCTV.com
• ZipNVR: Home
• ZipNVR: Home
• Zip Finder - IP Camera Discovery Tool - SoftCCTV.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>