ROCKLER AM/FM Stereo Wireless Speaker Kit Instructions

ROCKLER AM/FM Stereo Wireless Speaker Kit

GENERAL SAFETY WARNINGS

Review full instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent version of instructions for your product. This product is designed only for specific applications as defined in the instructions and should not be modified or used for any manner not described in these instructions. Use only recommended accessories. Before using the AM/FM Stereo Wireless Speaker Kit: READ, UNDERSTAND and FOLLOW ALL INSTRUCTIONS AND SAFETY WARNINGS. KEEP THESE INSTRUCTIONS READILY AVAILABLE FOR FUTURE REFERENCE.

• Always confirm that you are using the most recent version of the instructions and safety warnings for your product (see the instructions link on the product
  page at Rockler.com).

• Before using another tool with this product, always read, understand and follow the instructions and safety warnings in the owner’s manual for that tool. If you do not have the owner’s manual, obtain one from the tool’s manufacturer before using it with this product.

• Before using any chemical with this product, always read, understand and follow all safety warnings and guidelines in the manufacturer’s Safety Data
  Sheet (SDS; formerly called “MSDS”), especially regarding:

  • How to safely use the chemical, including potential hazards and recommended first aid measures;
  • Personal safety equipment required to safely use the chemical (e.g. gloves, eye protection, mask/respirator, etc.);
  • Proper and safe handling, storage and disposal of the chemical.
  • Before using this product, review and verify that all tools to be used with it have safety equipment installed and are in proper working order as defined by the tool’s owner’s manual.
  • Do not use this product until you have read and are confident you understand:

• Product Specific Warnings (pp. 3 – 4);

  • Assembly (p. 5);
  • Connecting to Your Device (p. 6);
  • Operating Controls (p. 6).

• The user assumes all risk and responsibility for the proper and safe use of this product and for ensuring product suitability for the intended application.

• It is the sole responsibility of the purchaser of this product to ensure that anyone you allow to use this product reads and complies with all instructions and safety precautions outlined in this manual prior to use.

• Follow all standard shop safety practices, including:

  • Keep children and bystanders away from the tool operating area;
  • Do NOT use power tools in explosive environments, or in the presence of flammable liquids, fumes or dust;
  • TURN OFF AND UNPLUG all power tools BEFORE making any adjustments or changing accessories;
  • Remain alert and use good judgment. Do not use this product if you are in any way impaired by medications, alcohol, drugs or fatigue;
  • Keep your work area well lit and clean;
  • Dress appropriately. Secure loose clothing, remove all jewelry and tie up long hair before using this product;
  • ALWAYS wear safety glasses, hearing protection and respiratory protection that complies with NIOSH/OSHA/ANSI safety standards;
  • Use dust collection tools and dust face masks to reduce exposure to dust;
  • Use safety equipment such as featherboards, push sticks and push blocks, etc., when appropriate;
  • Maintain proper footing at all times and do not overreach;

• Do NOT force woodworking tools.

• These warnings and instructions do NOT represent the total of all information available regarding tool safety, use and technique. Always seek out opportunities to learn more and improve your skills and knowledge.
  Warning: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.

SAFETY WARNING KEY

• Danger indicates a hazardous situation that, if not avoided, will result in death or serious injury.
• Warning indicates a hazardous situation that, if not avoided, could result in death or serious injury.
• Caution indicates a hazardous situation that, if not avoided, may result  in minor or moderate injury or property damage.
• Notice indicates important or helpful information and/or user tips.

PRODUCT SPECIFIC SAFETY WARNINGS

• Read, understand and follow all safety warnings included in these instructions. Keep these instructions in a place where they will be readily accessible later.

• To reduce the risk of fire or electric shock, do NOT expose this apparatus to rain or moisture. As with any electronic products, use care not to spill liquids into any part of the product. Exposure to liquids may create a failure and/or fire hazard.

• Do NOT place open-flame sources, such as lighted candles, on or near the product.

• Do NOT use near any heat sources such as radiators, heat registers, stoves, prolonged direct sunlight or other apparatus that produce heat.

• Do NOT subject batteries to mechanical shock or bending.

• This device uses an internal rechargeable lithium-ion battery. Never disassemble the unit or attempt to remove the battery as that could cause leakage of an electrolytic substance.

• In the event of a battery leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.

• Do NOT use any chargers or cords other than that specifically provided
  for use with the equipment.

• Do NOT leave a battery on prolonged charge when not in use.

• After extended periods of storage, it may be necessary to charge and discharge the batteries several times to obtain maximum performance.

• Batteries give their best performance when they are operated at normal room temperature: 68°F (20°C) ± 9°F (5°C).

• This product contains magnetic material. Contact your physician if you have questions on whether this might affect the operation of your implantable medical device.

CAUTION

• Do NOT make unauthorized alterations to the product; doing so may compromise safety, regulatory compliance and system performance.
• This product is NOT designed and has NOT been tested for use in recreational vehicles or on boats.
• This product is intended to be used only with the power supply provided.
• When working with epoxy, make sure the area is well-ventilated, wear nitrile gloves and use an applicator. Avoid contact with skin or clothing.
• Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Assembly

NOTICE
The wires for the AM and FM antennas are delicate. Handle them with care when mounting them inside the speaker enclosure.
Recommended interior dimensions of speaker enclosure: 3%” x 3%” x 8″.
A hollow box-type structure is recommended.
The AM/FM Stereo Wireless Speaker Kit includes right and left speaker units with connector wires and a control unit with two antenna wires. Each speaker must be spaced no farther than 12″ away from the control unit to allow wire connections to be made.
Each speaker unit requires a 24″ diameter hole in the enclosure, and the control unit requires a 2% x 1″ diameter pill-shaped opening. The opening can be made by using a Forstner bit to drill two 14″ holes spaced 14″ apart on center and then cutting or chiseling away the remaining material in between.

1. Determine where you want the speakers and the control unit to be and mark the locations for the holes.
2. Using the Mounting Hole Template Shop Drawing (p.11) cut the 2A” x 1%” diameter pill-shaped opening for the control unit. You can use a coping or scroll saw to cut the full opening or use a drill with a Forstner bit (55985, sold separately) or hole saw to cut two 1%” diameter holes spaced 14″ apart on center and then cut or chisel away the remaining material in between. Fig. 1.
3. Use a coping or scroll saw or a drill with a Forstner bit (56683, sold separately) or hole saw to cut two 24″ diameter holes for mounting the left and right speaker units.
4. Test fit the left and right speaker units into their respective mounting holes. Then press fit or, if desired, epoxy them in place. Make sure you will have access to the color-coded wires/connectors. Be sure to wipe away any excess epoxy.
5. Connect the wires from the left speaker unit to the control unit, pressing the white connector at the end of the set of wires into the white port on the back of the control unit.
6. Connect the wires from the right speaker unit and attached battery to the control unit, pressing the blue connecter on the other set of wires into the blue port on the back of the control unit first and red connector on the other set of wires into the red port last. Fig. 2.
7. Carefully remove the backing on the adhesive tape on the AM and FM antenna wires connected to the control unit.
8. Fit one of the antenna wires as far as you can away from the speakers inside one end of the enclosure and press the adhesive on the module(s) against the underside of the top. Fig. 3 and 4.
9. Fit the other antenna wire as far as you can away from the speakers inside the other end of the enclosure and press the adhesive on the module (s) against the underside of the top. Fig. 3 and 4.
10. Push the wires inside the opening and press fit or epoxy the control unit into the mounting hole.

Connecting to Your Device

NOTICE The LED indicator light will be red while the battery is charging and go off when the battery is fully charged.

1. Charge the speaker by plugging the small end of the included USB cord into the micro-USB port on the control unit and the other end into a power source.
2. Once the battery is charged, disconnect the USB cord. Make sure Bluetooth connectivity is enabled on your device.
3. Turn on the unit by pressing and holding theI button on the control unit for three seconds. The blue LED will blink.
4. When you open your device, “My BT Speaker3” should appear onscreen. Select it and wait for the connection to be established. Once a connection is established, the blue LED on the control unit will light up, the display will show “BLUE,’ and you wll hear a tone.
   Check Rockler.com for updates. If you have further questions, please contact our Technical Support Department at 1-800-260-9663 or support@rockler.com

Operating Controls

Other than the volume knob, the controls on the display function differently in different modes. Here’s how the controls function in each mode:
Bluetooth Controls – Default mode when the unit is turned on

Aux Controls

AM/FM Controls

IDENTIFICATION OF ASSEMBLED PRODUCT 66992 AM/FM STEREO

WIRELESS SPEAKER KIT
FCC ID: 2AT7N-66992CAUTION Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

APPLICABLE COMPLIANCE STATEMENTS

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

RESPONSIBLE PARTY/ MANUFACTURER ROCKLER COMPANIES

• ADDRESS 4365 WILLOW DRIVE, MEDINA, MN 55340
• TELEPHONE 1-800-279-4441
• www.ROCKLER.COM

BLUETOOTH ®

Version

| 5.0
---|---
BLUETOOTH ®

Profile

| A2DP, AVRCP
Transducer| 50mm
Output Power| 2*5W
Frequency Response| 150Hz-20khz
Signal-to-Noise Ratio| 80dB
Battery Charge Time| About 3 hours
Battery Play Time| About 7 hours

at 70% volume

Battery Capacity| 800mAh
Weight| 173g
BLUETOOTH ®

Transmitter Power

| ****

0dBm

BLUETOOTH ®

Transmitter Frequency Range

| ****

2.402-2.480GHz

BLUETOOTH ®

Transmitter Modulation

| ****

GFSK/π/4DQPSK

Power Supply| DC3.7v by battery or DC 5V by adapter
Audio Input| AUX
Charging Type| Micro USB
AM/FM

Operational Frequency

| FM (Receiver): 87.5-108 MHz

AM(Receiver): 522-1710 kHz

Antenna Gain| -0.58dBi
Antenna installation| PCB Antenna

Shop Drawings

Mounting Hole Template Scale: 1″ = 1″

The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Rockler Companies is under license.
1-800-279-4441
www.rockler.com
Distributed by Rockler Companies, Inc. 4365 Willow Dr. Medina, MN 55340

References

• Woodworking Tools, Hardware, DIY Project Supplies & Plans - Rockler
• P65Warnings.ca.gov/wood
• Woodworking Tools, Hardware, DIY Project Supplies & Plans - Rockler

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>