iHome Slip and Water Resistant Fabric Rechargeable Bluetooth Speaker-Complete Features/User Guide

iHome Slip and Water Resistant Fabric Rechargeable Bluetooth Speaker

Specifications

• Product Dimensions
  6 x 11.7 x 12.7 inches

• Item Weight
  9.9 ounces

• Batteries
  1 Lithium Ion batteries

• Speaker Type
  Personal

• Connectivity Technology
  Bluetooth

• Special Feature
  Speaker

• Brand
  I-Home

Introduction

With the iBT370 Bluetooth-enabled wireless system with built-in speakerphone functionality, you can carry the music everywhere. From your Bluetooth-enabled devices, stream wirelessly. Plays music from Spotify, iHeartRadio, and other sources using the free Melody voice-activated personal music assistant app. Digital voice echo cancellation and an integrated microphone make using the speakerphone a pleasure. Operates on an internal rechargeable battery, and charges through a USB charging connection (USB cable provided) (USB cable included). dustproof and water-resistant to IP65 standards Fabric with improved traction for rainy weather.

IMPORTANT SAFETY INSTRUCTIONS

When used in a directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit.

1. Water and Moisture
   The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.

2. Ventilation
   The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through the ventilation openings.

3. Heat
   The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that produce heat.

4. Power Sources
   The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

5. Power-Cable Protection
   Power supply cables should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where it is plugged into an AC socket.

6. Cleaning
   The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions.

7. Objects and Liquid Entry
   Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on the product.

8. Attachments
   Do not use attachments not recommended by the product manufacturer.

9. Lightning and Power Surge Protection
   Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges.

10. Overloading
    Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

11. Damage Requiring Service
    The unit should be serviced by qualified service personnel when:
    the power supply cable or plug has been damaged.
    objects have fallen into or liquid has been spilled into the enclosure.
    the unit has been exposed to rain.
    the unit has been dropped or the enclosure damaged.
    the unit exhibits a marked change in performance or does not operate normally.

12. Periods of Nonuse
    If the unit is to be left unused for an extended period of time, such as a month or longer, the power cable should be unplugged from the unit to prevent damage or corrosion.

13. Servicing
    The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service me

Charging the i-Home

The iBT370 is powered by a rechargeable battery in the speaker. Make sure to charge the speaker before use.

• Connect the micro-USB plug on the included charging cable to the USB Charging jack on the speaker.
• Connect the larger USB plug to a powered USB port, such as that on a computer. Your computer should be connected to a wall outlet when the speaker is charging. The light on the speaker will turn to solid red while charging and turn off when fully charged.
• If the LED flashes red, or you notice sound distortion at higher volumes, or there is no sound at all, it’s time to recharge the battery.

Using Bluetooth with the iBT370

• Place your audio device in Bluetooth mode (often found in the device’s Settings or Tools menu) and make it “discoverable”.
• Press and hold the Power ON/OFF Button for 5 seconds to turn on the iBT370 speaker. The first time unit is powered on it will enter auto-pairing mode.
• “iHome iBT370” should appear on your device’s Bluetooth menu. Select it to connect. If your device asks for a passcode, enter ‘1234’.
• Once paired, the light will glow solid blue and a confirmation tone will sound. You can then stream audio to the speaker. If pairing is not successful, turn the power off on the speaker and repeat the pairing procedure.
• To pair a different device or pair at another time, power ON the iBT370, then press and hold the Bluetooth/Play/Pause/Speakerphone Button for 2 seconds. The LEDs will flash blue and red, a tone will sound as the speaker attempts to pair with a Bluetooth device.
• To listen to Bluetooth audio, press the Bluetooth/Play/Pause/Speakerphone Button on the speaker to cycle between play and pause modes.
• Control audio volume and track navigation from your device. Remember to turn off the speaker (press and hold the Power ON/OFF Button for 5 seconds) after listening.

NOTE
When the unit is charging, the blue light will appear solid red.

Using the iBT370 Speakerphone Mode

The speaker must be on and connected to a paired Bluetooth phone to receive calls. When a call comes in, any playing audio is paused, the LED will flash blue 2X and the ringtone associated with the caller may sound, depending on the Bluetooth device.

• Press the Bluetooth/Play/Pause/Speakerphone Button to answer the call. Press again to end the call.

Maintenance

• Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on natural wood and lacquered finish. A cloth or other protective material should be placed between it and the furniture.
• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents such as thinner or similar materials can damage the surface of the unit.

Frequently Asked Questions

What is the lifespan of an iHome speaker?

With music and lights on, the battery lasts roughly 10 hours; with only lights on, it lasts two nights.

Can my Bluetooth speaker be overcharged?

No, as soon as the charger and battery reach balance, the device will cut off the charging circuit. The battery will switch from float (not charging) to charge, however, if you keep the speaker plugged in to charge continually, as soon as the battery level falls just below the float voltage.

How much time does it take a waterproof speaker to charge?

It takes 30 minutes to fully recharge your Ultimate Ears, Speaker. With the majority of USB chargers, Wonderboom may also be charged, albeit charging periods will vary depending on the power of the USB charger you use. If the micro-USB port, charging cable, or connectors are wet, unclean, or broken, never charge your Ultimate Ears, Speaker.

Does Android support the iHome Bluetooth speaker?

With the iBT70 color-changing rechargeable Bluetooth speaker, you can take the party with you wherever you go. The iBT70 features two audio input options: direct line-in via the included connection and any device with a headphone port, or Bluetooth wireless music streaming from any mobile device (including iPad, iPhone, iPod, Android, and Windows handsets).

How can I tell whether my speaker has enough juice?

The built-in lithium-ion battery is fully charged if the CHARGE indication remains off when the speaker power is off and connected to an AC outlet. Even if the speaker is kept plugged into an AC outlet, the battery won’t be able to be charged any further after it has reached its maximum capacity.

Can I always have my Bluetooth speaker on?

The battery will be harmed even if you leave the Bluetooth speaker connected the entire day. Even when the battery is fully charged, continuing to charge the speaker could cause the battery to overheat and perhaps explode.

How long does the battery in a speaker last?

A speaker should typically operate for ten to twenty hours after a full charge. This is what A full charge may only be good for a few hours of use on smaller Bluetooth speakers.

How is iHome controlled?

From the App Store or Google Play, download and launch the iHome Control application. Connect the SmartPlug to the appropriate outlet. The LED will start blinking to indicate it is ready for setup. To finish setup, select Add Device… under the Devices tab and adhere to the on-screen instructions.

IHome speakers: how nice are they?

Having said that, iHome is one of the greatest names in the industry that you can rely on. You should definitely look at the possibilities provided by iHome because almost all of their speakers have good audio quality and are reasonably priced.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>