METER 18299 TEROS Verification Clip Print User Guide
- June 9, 2024
- METER
Table of Contents
METER 18299 TEROS Verification Clip Print
Preparation
Confirm that the verification clip components are intact. The verification clip helps verify proper function and accuracy for TEROS 10, 11, and 12 soil moisture sensors prior to installation. A data acquisition system and the appropriate software are required, such as the ZL6 and ZENTRA Utility or ZENTRA Utility Mobile.
ATTENTION: For best results, use the latest versions of METER software and firmware for the computer or mobile device, products, and sensors. Please use the software Help menu to find updates. Consult the sensor user manual for more troubleshooting tips.
Installation
- Place Verification Clip on Sensor
- Slide the verification clip onto the two prongs farthest away from the sensor cable with the arrow pointing toward the sensor.
- WARNING: Risk of personal injury is present. Sensor needle points are extremely sharp and will puncture skin. Please handle with care.
- Ensure Correct Placement
- The verification clip should rest snugly against the sensor body.
- Connect TEROS Sensor to Data Logger
- Plug the sensor into the data logger and use the SCAN function in the software.
- Verify Sensor Function and Accuracy
- The sensor should read within the appropriate ranges.
SUPPORT
Have a question or problem? Our support team can help. We manufacture, test, calibrate, and repair every instrument in house. Our scientists and technicians use the instruments every day in our product testing lab. No matter what your question is, we have someone who can help you answer it.
NORTH AMERICA
- Email: support.environment@metergroup.com
- Phone: +1.509.332.5600
EUROPE
- Email: support.europe@metergroup.com
- Phone: +49 89 12 66 52 0
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>