Masonite 1524015 60-in x 80-in Fiberglass Full Lite Left-Hand Inswing User Manual

Masonite 1524015 60-in x 80-in Fiberglass Full Lite Left-Hand Inswing

How to Measure Your Door

CHOOSE YOUR DOOR HANDING AND SWING

Masonite doors can be installed for right or left handed operation (as viewed from outside the home)

• Inswing
• Outswing
• Hinged Double Door Inswing
• Hinged Double Door Outswing

MEASURE THE WIDTH OF YOUR EXISTING DOOR JAMB:

• 4-9/16″
• 6-9/16″
• Other

MEASURE THE EXISTING ROUGH OPENING

To ensue accurate measurements. first remove the interior casing on the sides and top of your single or double door to reveal rough opening frame.

1. Measure from inside the face of one stud to inside the face of the other stud a and write down the measurement
2. Measure from the subfloor (plywood or concrete) to the bottom oft the header above the door and write down the measurement
   Measurement A ____
   Measurement B _____

ROUGH OPENING SPECI.FICATIONS FOR UNITS WITH 36″ WIDE DOOR

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>