LuxenHome WHAP1802 6.5Ft Pre-Lit Artificial Snow Flocked Christmas Tree Instruction Manual
- June 17, 2024
- LuxenHome
Table of Contents
LuxenHome WHAP1802 6.5Ft Pre-Lit Artificial Snow Flocked Christmas Tree
Product Information
Specifications:
- Product Name: 6.5Ft Pre-Lit Artificial Snow-Flocked Christmas Tree
- Item #: WHAP1802
- Quantity: Tree Top (1), Tree Middle (1), Tree Bottom (1), Tree Stand (1), UL 120V Plug (1)
- Usage: Indoor display only
Product Usage Instructions
Before You Start:
- Decide on an appropriate location for your product and carefully read the assembly and instruction procedure.
- Retain the instructions for future use and save the carton for storing your tree.
Assembly and Instruction Procedure:
No tools are required for assembly
-
Assemble Tree Stand:
The first step is to assemble the metal stand for the tree. Pull apart the legs of the stand to form an X shape. Lock the stand in position with the eye bolt inside the metal tab. Screw the eye bolt through the hole on the inside metal tab. -
Shape the Tree: Begin shaping the branches from the bottom of the tree to the top.
Start with the tree tips farthest away from the center pole. Reshape branches as needed to achieve a uniform look. Once shaped, step back to look for any gaps and adjust accordingly. You can upsweep the branch tips for a more uniform appearance. Once shaped to your liking, you can proceed with decorating!
FAQ (Frequently Asked Questions)
Troubleshooting:
- Some bulbs are not lighting, or lights do not come on at all:
- Check for loose plug connections between the tree sections.
- Inspect for loose or missing bulbs.
- Tree is not straight:
- Try adjusting the screws in the tree stand to straighten the tree.
- It’s better to make adjustments when the tree is in a vertical position.
- If these actions do not resolve any issues with the tree, please contact customer service for further assistance.
Product Name: 6.5Ft Pre-Lit Artificial Snow-Flocked Christmas Tree
Item # WHAP1802
Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from the packaging inside the carton to ensure no missing or
damaged parts. Do not attempt to assemble or use the product if any parts are
missing or damaged.
CARTON CONTENTS
| Description | Quantity |
|---|---|
| Tree Top (A) | 1 |
| Tree Middle (B) | 1 |
| Tree Bottom (C) | 1 |
| Tree Stand | 1 |
| UL 120V Plug | 1 |
Before You Start
-
Decide on an appropriate location for your product; please read the assembly and Instruction procedure carefully.
Note: This tree may utilize light sets marked for indoor and outdoor use, but the artificial tree is for indoor display only. -
Retain the instructions for future use and save the carton for storing your tree.
Assembly and Instruction
Assembly and Instruction Procedure (no tools required for assembly):
Remove all packaging (i.e., cardboard or plastic) before beginning. Because
the artificial tree has snow-flocking, we suggest unpacking the tree on a
large cloth. Some of the flocking may come off during unpacking and fluffing
of branches.
-
Assemble Tree Stand:
The first step is to assemble the metal stand for the tree. Pull apart the legs of the stand so that they have an “X” shape. Lock the stand in position with the eye bolt inside the metal tab. Screw the eye bolt through the hole on the inside metal tab.
-
Assemble the Tree:
Carefully insert the bottom of the tree section (C) into the assembled stand. Ensure the tree pole is firmly inserted into the stand and turn the screws so they touch the tree “trunk.” Stand the tree upright and straighten it by adjusting the tree stand screws in or out. Once the bottom tree section is straight, tighten the screws to secure it. Insert the middle section (B) into the bottom section (C). And lastly, insert the treetop (A) into the middle section (B). Now that the tree is fully assembled connect the light plugs as shown in the image below. Attach the plug to the string lights in the tree’s bottom section and plug it into an electrical outlet. If lights do not come on, skip to the section for troubleshooting tips.
-
Shape the Tree:
Begin to shape the branches from the bottom of the tree to the top. Start with the tree tips farthest away from the center pole. After shaping the tree, step back to look for any gaps. Reshape branches as needed. You can upsweep the branch tips for uniform look. Once you have the tree the way you want it, you can start decorating!
Warnings
- Risk of Fire and Electric Shock – please follow instructions and warnings on string lights if adding lights to trees.
- Do not place near fireplaces, candles, outdoor heaters, or other similar sources of heat. This item is not flame retardant.
- Do not install near pools, fountains, tubs, sinks, or other areas of standing water that the tree may fall or blow into.
- Keep wires clear of being pinched or cut during assembly or installation. Discard sets with cut or pinched insulation.
- Make sure final assembly stable enough to hold the tree upright.
- Do not use candles on tree. Use only with the pre-installed string lights included.
- This product is for decoration use only. Not to be used by children as a toy. Keep out of reach of small children.
Troubleshooting
- Some bulbs are not lighting, or lights do not come on at all: Search for any loose plug connections between the tree sections. Search for loose or missing bulbs.
- Tree is not straight: Try adjusting the screws in the tree stand to adjust the tree. It is better if the tree is in the vertical position when adjusting.
Note: If these actions do not resolve the issue with the tree, please do not disassemble the tree yet. Please contact customer service for assistance.
Storage
- Remove all decorations (this does NOT include the pre-installed string lights).
- Starting from the top, carefully unassembled the tree sections. Press the tree tips back up against the pole.
- Place the branch sections back into the carton, putting the longest one on the bottom.
- Store the product in a cool, dry location protected from sunlight where the temperature does not exceed 35˚C (95˚F).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>