abolos REF0306-GOBx Gold Beveled Subway 3 in. x 6 in. Glass Mirror Instructions
- June 2, 2024
- ABOLOS
Table of Contents
abolos REF0306-GOBx Gold Beveled Subway 3 in. x 6 in. Glass Mirror
Instructions
Ceramic tile is a durable and low-maintenance surface for your walls, floors,
and countertops. It will retain its original beauty and luster for many years
with proper maintenance. A quick wipe with a clean damp cloth or mop helps
prevent the buildup of food, soil, grease, residue, soap, sealers, and
liquids.
Prompt cleanup will aid in keeping your ceramic tile surfaces looking their
best. Glass mosaics require low maintenance due to being impervious to
moisture and sub surface staining. It
is recommended the use of low VOC (volatile organic compound), neutral pH,
nonhazardous, and nonpolluting products if a stronger cleaning agent is
required. Avoid cleaning solutions containing ammonia, oils, fats, or acids.
Follow all directions provided by the cleaning product manufacturer for proper
application, dilution, and usage. Acids can damage the grout and the tile
glaze, and ammonia can discolor the grout. The entire area should be cleaned
and scrubbed with clean water first, then a cleaning solution if necessary.
Apply through the use of a cotton mop, cloth, sponge, or gentle nonmetallic
brush. A final rinse with clean water will remove cleaning solution residue.
For glazed tile floors, sweep or vacuum regularly to remove dirt, rocks, or
other gritty particles. Follow with a mop or sponge dampened with a neutral pH
cleaner. Always be sure to rinse and thoroughly dry the tile surface once
cleaning is complete. Tiled surfaces in your bathroom may require more
frequent cleaning due to the buildup of soap, oils, and hard-water residue.
Use a clean damp cloth or sponge with a neutral pH cleaner and allow it to
stand about five minutes before rinsing and drying. Dry with a towel after
each use and leave curtain or door open to facilitate ventilation for moisture
escape. A multipurpose spray cleaner can be used on wall tile areas in
residential baths and showers as long as they meet the criteria detailed
above. Always test cleaning products on a small, discrete area prior to
conducting a full
cleaning.
Use unsanded grout for all natural stone, metal, or glass tiles. Abrasive
materials or chemicals can scratch the surface of the tile. We recommend using
quality silicon rubber grout floats and sponges during installation. Remove
all excess grout immediately with a damp sponge to prevent grout haze from
drying on the tile surface.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>