PROGRESS LIGHTING 8721 Alpha Trak Floating Canopy Instruction Manual

June 9, 2024
PROGRESS LIGHTING

PROGRESS LIGHTING 8721 Alpha Trak Floating Canopy

CAUTION: Read instructions carefully and turn electricity off at main circuit breaker panel before beginning installation

WARNING

  • If any Special Control Devices are used with this Fixture, Follow the Instructions Carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a Qualifled Electrical Contractor.
  • This product contains chemicals known to the State of California to cause cancer, birth defects and lor other reproductive harm. Thoroughly wash hands after installing, handling, cleaning, or otherwise touching this product

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

REFER TO THEM WHEN ADDITIONS TO OR CHANGES IN THE TRACK CONFIGURATION ARE MADE

  1. THIS TRACK ACCESSORY is to be used with PROGRESS TRACK 1 TRACK only.
  2. DO NOT attempt to power this TRACK ACCESSORY with any form of power supply cord from a wall recaptacle, or to attach any form of convenience receptacle to this TRACK ACCESSORY.
  3. Use of this TRACK SYSTEM with dimmers, timing controls, energy saving devlces, speclal security switching. or other devices could create a safely hazard, Obtain professional advice before using this

TRACK SYSTEM with other devices

Assembly & Installation Instructions

WHEN INSTALLING OR USING THIS TRACK AcCESSORY, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE

FOLLOWED INCLUDING:

  1. Read all instructions and TRUN OFF ELECTRICITY at MAIN FUSE BOX, before installing, adding to, or changing the configuration of the track. Also disconnect electrical power at the fuse or circuit breaker, before servicing or relamping.
  2. DO NOT install this TRACK ACCESSORY in a damp or wet location, or less than five(5) feet above the fioor. TRACK MUST be installed in a location and a manner consistent with its Intended use and in compllance with the NATIONAL ELECTRICAL CODE and with other. local ELECTRICAL CODES. TRACK must be GROUNDED to avoid potential electrical shock or other potential hazards. Polarity must be maitained throughout the installation.
  3.  DO NOT use this track ACCESSORY for other than its intended use. To reduce the risk of fire and electric shock. DO NOT attempt to connect power tools, extension cords, appliances, and the like to this TRACK ACCESSORY
  4. DO NOT install any TRACK LIGHTING FIXTURE ASSEMBLY or ACCESSORY closer than stx(6) Inches from any Curtain or similar combustible material.
  5. All servicing. MUST be performed by qualified service personnel.

FOR TRACK CONNECTORS CRoss, T &L

WARNING
DO NOT turn on power to TRACK until this CONNECTOR is fully installed in all TRACK sections to be connected. Exposed cONDUCTORS become electrically LIVE and DANGEROUS immediately, when power Is turned on.

PROGRESS LIGHTING 8721 Alpha Trak Floating Canopy 1

  1. Loosen RETAINING SCREWS on CONNECTOR and insert CONNECTOR into TRACK (SEE WARNING ABOVE).
    NOTE: CONNECTOR ill only fit into TRACK one way with POLARITY GUIDE SLOT on CONNECTOR in line with POLARITY GUIDE SLOTS on TRACK sections.

  2. After TRACK sections are connected. tighten RETAINING SCREWS.

SAVE THESE INSTRUCTIONS

Documents / Resources

| PROGRESS LIGHTING 8721 Alpha Trak Floating Canopy [pdf] Instruction Manual
8721 Alpha Trak Floating Canopy, 8721, Alpha Trak Floating Canopy, Trak Floating Canopy, Floating Canopy, Canopy
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

PROGRESS LIGHTING User Manuals

Related Manuals