BOSCH MUZ5FW1 Meat Mincer Grinder User Manual

: June 4, 2024
: Bosch

BOSCH MUZ5FW1 Meat Mincer Grinder

BOSCH-MUZ5FW1-Meat-Mincer-Grinder-product

Safety

Observe the following safety instructions.

General information

Read this instruction manual carefully.
Observe the instructions for the base unit.

Intended use
Only use the accessories:

with a kitchen machine from the same series MUM5.
With genuine parts and accessories.
For cutting up raw or cooked food, e.g. meat, fish and vegetables.
For additional applications described in these instructions.

Safety instructions

WARNING ‒ Risk of injury!
Rotating drives, tools or accessory parts may cause injury.

Do not reach into the filling shaft.
Only use the pusher to push down ingredients. Improper use may cause injuries.
Never assemble the accessories on the base unit.
Only attach and remove accessories once the drive has stopped and the appliance has been unplugged.
The accessories should only be used in the intended operating position.

Avoiding material damage

ATTENTION!
Improper use may cause material damage.

Do not process food that contains hard components, e.g. bones, gristle or stones.
Do not insert objects into the filling shaft or housing, e.g. wooden spoons.
Before use, check the filling shaft and housing for foreign objects.

Unpacking and checking

Find out here what you need to note when unpacking the appliance.

Unpacking the accessories and parts

Take the accessories out of the packaging.
Take all other parts and the accompanying documents out of the packaging and place them to hand.
Remove any packaging material.
Remove any stickers or film.

Contents of package

After unpacking all parts, check for any damage in transit and the completeness of the delivery. Fig. 1

A Meat mincer attachment
B Accompanying documents

Cleaning the accessories before using for the first time

Clean all parts that come into contact with food before using for the first time. “Cleaning and servicing”, Page 13
Put the cleaned and dried parts out ready for use.

Familiarising yourself with the accessories

Components

You can find an overview of the parts of your accessories here. Fig. 2

A Meat mincer attachment
B Juicer attachment1
C Perforated discs1
D Grater attachment1
E Viennese whirl attachment1
1 Housing
2 Worm gear with agitator paddle
3 Knife
4 Perforated disc, medium
5 Threaded ring
6 Seal
7 Filling tray
8 Pusher
Special accessory
9 Worm gear for juicer attachment
10 Strainer housing
11 Juicer housing
12 Perforated disc, fine
13 Perforated disc, coarse
14 Worm gear for grater attachment
15 Grater drum
16 Cover
17 Holder for shape plate
18 Shape plate

Special accessory
You can find an overview of the special accessories and how to use them here.

Perforated discs
The fine and the coarse perforated disc are suitable for additional processing functions.

Juicer attachment
The juicer attachment is suitable for squeezing soft fruit and vegetables, e.g. berries, tomatoes, apples, pears, and rose hips.

Notes

Do not press fruit whose pips are similar in diameter to the hole diameter in the strainer insert, e.g. raspberries.
Cook hard food before squeezing to make it soft enough, e.g. rose hips.

Viennese whirl attachment
The Viennese whirl attachment is suitable for shaping biscuit dough or shortcrust pastry.

Grater attachment
The grater attachment is suitable for grating hard foods, e.g. almonds, nuts, chocolate, hard cheese or dry bread rolls.

Note: Only process dry nuts and almonds in small quantities.

Overload protection
The overload protection system prevents the motor and other components from being damaged through being overloaded. If the meat mincer is overloaded or blocked, the agitator paddle on the worm gear will break at the predetermined breaking point.

Note: Spare parts with a predetermined breaking point are not covered by our warranty obligations. A new agitator paddle is available from customer service under order number 00418076.

Replacing the agitator paddle

Remove the faulty agitator paddle.
Insert the new agitator paddle.

Before using the appliance

Prepare the base unit and the accessories for use.

Preparing the base unit
Note: The food processor shown in the pictures may differ from your model in terms of shape and features.

Set up the base unit as described in the main operating instructions.
Press the release button and move the swivel arm down until it engages in the vertical position. Fig. 3
The swivel arm is fixed in position 3.
Rotate the base unit to the operating position. Fig. 4

Inserting the seal

Insert the seal into the housing and press in firmly. Fig. 5 The recesses must match up exactly.

Assembling the attachments

Note: To use the special accessory, you need the parts of the meat mincer, except for the knife and perforated disc.

Assembling the meat mincer

Fit the worm gear into the housing with the agitator paddle at the front. Fig. 6
Fit the knife onto the worm gear with the square projection at the front. Fig. 7
Insert the required perforated disc into the housing. Fig. 8 Observe the recess on the perforated disc.
Fit the threaded ring and tighten clockwise slightly. Fig. 9

Assembling the juicer attachment
Follow the illustrated instructions. Fig. 10 – 14

Assembling the Viennese whirl attachment
Follow the illustrated instructions. Fig. 15 – 18

Assembling the grater attachment
Follow the illustrated instructions. Fig. 19 – 22

Fitting the attachment

Open the locking lever. Fig. 23
Hold the prepared attachment horizontally and match up the ends of the agitator paddle with the drive. Fig. 24
Push the attachment fully onto the drive.
Rotate the attachment anticlockwise as far as possible. Fig. 25
Close the locking lever. Fig. 26
Tighten the threaded ring clockwise.
Attach the filling tray. Fig. 27
Place a suitable container under the attachment. Fig. 28

Basic operation

Recommended speeds
Observe the recommended speeds for optimum results.

Note:
Your model is equipped with a 4- or 7-level rotary switch depending on the features of the appliance. The recommended speeds for the 4-level rotary switch are always shown in brackets in these instructions for use.

Setting Use

7 (4) Meat mincer
7 (4) Juicer attachment
4-5 (2-3) Viennese whirl attachment
3-4 (2-3) Shredding attachment

Processing food

Prepare your food. Cut large items of food into pieces so they fit into the filling shaft.
Insert mains plug.
Set the rotary switch to the recommended speed. Fig. 29
Insert the food into the filling shaft and press down with the pusher, applying light pressure. Fig. 30
Set the rotary switch to O/OFF Fig. 31 Wait until the appliance stops.
Unplug the mains plug.

Processing food with the juicer attachment

Note: When working with the juicer attachment, note the following special features.

Place two containers under the relevant openings.
Before starting processing, turn the setting screw anticlockwise and open. Fig. 32
During processing use the set screw to select the desired consistency of the fruit purée and pulp.

Removing the attachment

Remove the filling tray and pusher and open the locking lever. Fig. 33
Rotate the attachment and remove it from the base unit. Fig. 34

Tip: Clean all parts immediately after use so that residues do not dry on.

Cleaning and servicing

Cleaning products

Find out here what cleaning agents are suitable for your accessories.

ATTENTION!
Using unsuitable cleaning agents or incorrect cleaning may damage the accessories.

Do not use cleaning agents containing alcohol or spirits.
Do not use sharp, pointed, or metal objects.
Do not use abrasive cloths or cleaning agents.
Only clean the control panel and the display using a damp microfibre cloth.

Cleaning the individual parts

Dismantle the attachment used. To do so, proceed in reverse order as described for assembly. “Assembling the attachments”, Page 12
Clean all individual parts with a detergent solution and a soft cloth or sponge.
Dry metal parts. Dry the other parts.

Note: Rub the cleaned metal parts with a little cooking oil to protect them from rust.

Overview of cleaning

Clean the individual parts as indicated in the table. Fig. 35

Documents / Resources

| BOSCH MUZ5FW1 Meat Mincer Grinder [pdf] User Manual
MUZ5FW1, Meat Mincer Grinder, MUZ5FW1 Meat Mincer, Meat Mincer, Mincer, MUZ5FW1 Meat Mincer Grinder, Mincer Grinder, Grinder
---|---