MONSTER TECH 0071 Winwing Panel Mount Instruction Manual
- June 4, 2024
- MONSTER TECH
Table of Contents
MONSTER TECH 0071 Winwing Panel Mount Instruction Manual
GENERAL ASSEMBLY INFO AND HOW TO PROFILE NUT
HEX KEY SET WITH BALL HEAD + EXTENSION OR SIMILAR REQUIRED
UNIVERSAL CONNECTOR
BOLT DIMENSIONS AND HOW TO MEASURE THEM [mm]
PROFILE CAP ASSEMBLY
PARTS FOR CENTER MOUNT
PARTS FOR SIDE MOUNT
ASSEMBLY FOR CENTER MOUNT
OPTIONAL MOUNTING OF A SECOND PANEL ON TOP
ASSEMBLY FOR SIDE MOUNT
WARNING NOTICES
CAUTION! Do not clamp your fingers while attaching the table mount.
CAUTION! Check before usage if all screws are tightened.
CAUTION! Check before usage that the mounting plate is screwed on tight after
making height adjustments.
DANGER: Contains small parts not suitable for children under 3 years.
Only suitable for children over 12 years and adults.
All MTSIM products are hand assembled and quality checked.
The mount is designed for usage only with a computer controller (e.g. joystick
or throttle).
We exclude liability if the product is used for purposes other than intended.
MTSIM shall be liable for damage arising from causes other than the detriment
to life, body and health only to the extent that such damage arises from
wilful misconduct, gross negligence or the culpable violation of
a fundamental contractual obligation on the part of MTSIM or a vicarious agent
(e.g. the delivery service) of
MTSIM. Any further liability for damages shall be excluded.
If you have safety concerns or questions regarding assembly, contact us under
[email protected] or visit www.mtsim.com/en/