FOREVER SW-700 Smartwatch User Manual
- June 9, 2024
- FOREVER
Table of Contents
FOREVER SW-700 Smartwatch
INTRODUCTION
Thank you for purchasing a product by Forever. Before use, please refer to the User’s manual, and save it for future reference. Do not disassemble the device on your own – all repairs should be done by a service technician. Use only original parts and accessories provided by the manufacturer. We hope that the product by Forever fulfills your expectations.
Description
- Touch screen
- Main/rotary button
- Lower button
- Heart rate sensor
- Charging port
Specification:
- Waterproof: IP68
- Battery: Li-po 3,7260 mAh, 0,962Wh
- Bluetooth: 5.0 and 3.0
- Charging time: 2 hours
- Standby time: up to 15 days
- Display: touch screen, IPS, 1.32” 360x360px
- Weight: 62 g
First launching:
When using the device for the first time, take it out of the package and
charge it using the supplied charging cable. The device will turn on
automatically after charging is completed. Date and time of the device will be
automatically synchronized and set after establishing connection with a
dedicated application via Bluetooth.
Charging:
Connect the device with the charging cable included in the kit. Make sure that
the device and cable connectors are connected to each other, and then connect
the USB cable to a power source. After the charging process is complete,
disconnect the smartwatch from the charging cable and disconnect the cable
from the power source.
Turning the smartwatch on/off:
Turning on : Press and hold the function button until the smartwatch
turns on. Turning off: Press and hold the function button until the device
turns off. You can also go to the settings tab in the smartwatch menu and
select the “Disable” option marked with the following symbol , and then
confirm your choice.
Instalation of Forever BeFit application:
Find application called “Forever BeFit” in Google Play or App Store and
install it.
NOTE: The operating system of the phone must have the following minimum
specifications to run the application and support the smartwatch:
Android 5.1 or higher iOS 10.0 or higher
NOTE: To be able to use all functions of the application and the smartwatch, during the first launching, allow the application to access all required functions, and then also activate access to notifications.
Connect smartwatch with smartphone
-
Turn on Bluetooth on Your smartphone.
-
Turn on “Forever BeFit” on Your smartphone and make registration steps.
-
Choose the smartwatch model numer from the list.
If the watch is not visible on the list, you should “forget” it in the Bluetooth settings on your smartphone and connect only through the application. The only right way is to connect the device through the Application menu. -
Confirm the connection by choosing in device.
-
Allow BT 3.0 connection for use Bluetooth phone calls function. If the connection is successful, the BT icon on the watch screen will be two-color :
If you are using iOS system please:
Open the Bluetooth settings on the smartphone, click connect Bluetooth 3.0 in
the search list, the Bluetooth icon in the smartwatch will turn blue . It
means that the devices have been connected correctly.
How to use
- To turn the watch’s power on or off, press and hold the main button.
- You can wake up the screen by raising your hand or pressing a function button
- Daily activity: Swipe the watch face interface to the left.
- Selecting Functions: Swipe the watch face interface up. Move the function with the top rotary button.
- Short menu: Swipe the watch face down.
- Notifications: Swipe the watch interface to the right twice.
- Confirm: Select the icon.
- Return: slide the watch interface from left to right.
- Return to the main watch face: press main button.
- Return to the main watch face: press main buton.
Changing the watch face
To change the face, press and hold the watch face interface and then scroll left or right. To confirm your choice, click the selected style once. Or use the rotary button when displaying a virtual watch face.
- Additional watch faces and the “Do It Yourself” shield are available for upload in the application menu.
Skrócone menu
- Do not disturb mode
- Bluetooth 3.0 connection – responsible for BT phone connections
- Music control
- Screen brightness
- Settings
Functions
Daily activities
The device automatically calculates your daily activity data.
Select the “Daily Activity” icon to check the number of steps, distance
traveled and calories burned for the day.
Why is the pedometer not showing the ideal number of steps?
The pedometer is based on an accelerometer that records activity while you are
on. the task is to show the activity not only that obtained while taking
“steps”. Wrist movement is recorded if the wrist movement is greater than 10.
The device uses an accelerometer that is triggered by any body movements, so
if you sit in a chair and move your arms, cycle or travel in a car, it may
still register these movements as steps.
Sport history
You can check the history of your sports activities.
Music
Select the music icon to enter the music playback control interface. You can
select the previous/next song, adjust the volume and also play / stop the
music. The device has a memory for songs (512 MB), which allows you to add
about 100 songs of average length.
- To add music to the watch’s memory, connect the device to the computer via the charging cable (included in the set). Then add your favorite songs to the folder. After disconnecting the smartwatch, you can play songs directly from the device.
Open the function and expand the menu to select one of the three music playback options:
- Device – to play music previously transferred to the watch memory using the loudspeaker built into the smartwatch.
- Phone – to use the device to control the music on your phone. Just open the music player app on your smartphone, then control playback from your wrist.
- Hearphones – to play music from the Smartwatch memory via Bluetooth headphones. The smartwatch will display the option to select paired or add new headphones.
Blood oxygenation
To start the measurement, press the “Blood oxygenation” icon. Wait for the
device to measure and display the result. After synchronizing the data, you
can check the measurement history in the app.
Weather
Select the icon to view the current weather data.
Schedule
Here you will find the list of events that you have scheduled in the app.
Additionally, by adding events in the application, you can set a reminder
about it.
Sleep
The smartwatch automatically monitors sleep at night. After waking up the next
day, the smartwatch will display the total number of hours slept.
After synchronizing the data, you can check the measurement history in the
app.
Blood pressure
To start the measurement, press the “Blood pressure” icon. Wait for the device
to measure and display the result.
After synchronizing the data, you can check the measurement history in the
app.
Notifications
Check the history of notifications from your smartwatch. To decide from which
sources you will receive notifications, start the application, open the device
and “Notifications” tab.
Stopwatch
Start the stopwatch function.
Timer
Start the timer function.
Clock alarm
Turn the alarm clock on or off. To add or remove an alarm, open the
application and the Device tab.
Bluetooth phone calls
The device is equipped with a speaker and a microphone, so you can make phone
calls via a Bluetooth connection. To use it, your phone must be within the
Bluetooth range of the watch – up to 10 meters.
The call function allows you to select a number from the numeric keypad,
access the history of recent calls and select a contact from the list. To use
the contact list, synchronize them via the application in the Device tab. You
can upload up to 20 contacts.
- When receiving a call notification on the Smartwatch, I cannot answer or decline the call. Why is it like that?
- To use the Bluetooth phone call function, the device must additionally be connected to the Smartphone via Bluetooth 3.0.
- When I receive a call notification on the Smartwatch, it takes a while for me to answer or reject the call. Why is it like that?
- Smartwatches and smartphones put Bluetooth 3.0 to sleep when not in use to save energy. When you use the Bluetooth connection function, the devices must activate the Bluetooth 3.0 connection.
Find the phone
If the smartwatch is connected to the application, pressing this icon will
make the phone ring, which will make it possible to find it.
Stress measurement
Stress levels (0-100) are estimated by the algorithm using a combination of
heart rate data and heart rate variability. This data is recorded by the
optical heart rate sensor on the back of the device.
Measurements are performed automatically and the results can be read in the
app. Every hour, the device provides the result from the previous hour.
Camera
Use your smartwatch as a photo trigger. Just turn on the application on the
smartphone screen, and then select the “Camera” function in the watch’s menu.
Application
Open and scan the QR code to download the application.
Rules for safe use
SECURITY
Please read these tips carefully. Failure to follow these instructions may be
dangerous or illegal.
DO NOT RISK
Do not switch the device on in places where the use of electronic devices is
forbidden, or when it may cause interference or other hazards. Comply with all
kinds of prohibitions, regulations and warnings provided by the personnel of
the place where you want to use the device.
PROFESSIONAL SERVICE
Only qualified service of the manufacturer or an authorized service center may
repair this product. Repairing the device by an unqualified service center or
by an unauthorized service point may damage the device and void the warranty.
MODIFICATIONS
The manufacturer is not responsible for damage caused by unauthorized
modifications.
MOBILE AND MENTAL DISABILITIES AND CHILDREN
The device should not be operated by people (including children) with limited
mobility or mental , as well as by people who have no experience in the use of
electronic equipment. They may use it only under the supervision of persons
responsible for their safety after reading and understand the instructions on
how to use the device safely. Keep the device and its packaging out of the
reach of children. Cables and plastic bags can become wrapped around a child’s
neck and cause suffocation. The device is not a toy.
BLUETOOTH
The wireless Device complies with safety and radio frequency standards. All
wireless devices may cause interference that may affect the operation of other
devices.
SURROUNDINGS
The device should not work in dusty conditions. Connect the device in such a
way that it cannot be damaged and does not pose a threat to people and
animals. Do not expose the device to sunlight and do not use it, or leave it
in the immediate vicinity of devices that emit a lot of heat (heaters,
radiators, etc.). Plastic elements may deform, which may affect the operation
of the device or lead to its complete damage.
BATTERIES
Avoid exposing the battery to very cold or very hot temperatures. Extreme
temperatures can affect the capacity and lifetime of the battery. Avoid
exposing the battery to liquids or metal objects, as this may lead to total or
partial damage to the battery. Use the battery only for its intended purpose.
Do not destroy, damage or throw the battery into fire – it can be dangerous
and cause a fire. Used or damaged battery should be placed in a special
container. Overcharging the battery may damage it. Therefore, do not charge
the battery longer than necessary to fully charge it.
Proper disposal of used equipment
This device is marked with a crossed-out garbage container symbol, in accordance with the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE). Products marked with this symbol should not be disposed of or discarded with other household waste at the end of their service life. The user is obliged to dispose of waste electrical and electronic equipment by delivering it to a designated point, where such hazardous waste is recycled. The collection of this type of waste in separate locations and the proper recovery process contributes to the conservation of natural resources. Proper recycling of waste electrical and electronic equipment is beneficial to human health and environment. For information on where and how to dispose of used electronic equipment in an environmentally safe manner, the user should contact the relevant local authority, the collection point or the point of sale where the equipment was purchased.
Proper disposal of used battery
In accordance with EU Directive 2006/66/EC, as amended by Directive 2013/56/EU on the disposal of batteries, this product is marked with a crossed-out garbage container symbol. This symbol means that the batteries used in this product should not be disposed of with ordinary household waste, but handled in accordance with the directive and local regulations. Do not dispose of batteries with unsorted municipal waste. Battery users must use available collection network for these items, that allows for their return, recycling and disposal. Within the EU, the collection and recycling of batteries is governed by separate procedures. To learn more about existing battery recycling procedures in your area, contact your city hall, waste management agency or landfill.
Declaration of Conformity with European Union Directives
TelForceOne Sp. z o.o. hereby declares that the SW-700 Grand is in compliance
with Directive 2014/53/EU. The full text of the EU Declaration of Conformity
is available at the following web address:
https://www.manual.forever.eu/SW700
Producer information:
TelForceOne S.A.
ul. Krakowska 119
50-428 Wrocław Poland
E-mail: info@forever.eu
Designed in Poland Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>