Proaim P-GHF-01 Folding Camera Gimbal Tripod Head for Telephoto Lenses Instruction Manual
- June 9, 2024
- PROAIM
Table of Contents
Proaim P-GHF-01 Folding Camera Gimbal Tripod Head for Telephoto Lenses
What’s In The Box
Please inspect the contents of your shipped package to ensure you have
received everything that is listed below. 
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or
transmitted by any form or by any means, electronic, mechanical, photocopying,
recording, or otherwise, except as may be expressly permitted by the
applicable copyright statutes or in writing by the Publisher.
Folding Camera Gimbal Setup
-
Properly open the Folding camera Gimbal Head as shown in the image.
NOTE: The gimbal head folds up into a compact and manageable size, making storage and transit super easy.
-
Now, properly tighten the Folding Gimbal Head with the help of the knob.
NOTE: There is also a spirit level at the base of the gimbal head for extra precision, as well as numbered scales to facilitate repeat setting on the gimbal head.
-
Loosen the knob of the Folding Gimbal Head and mount it onto the Tripod Stand (Not Included).
-
The Folding Gimbal Head has been properly mounted on the tripod stand.
NOTE: The gimbal head is easily mounted on a tripod via a 3/8”-16 threaded hole at the bottom of the base.
Assembling of L-Bracket
- Open the L-Bracket by pressing its push pin.
- Loosen the top knob of the Folding Gimbal Head and attach the L-bracket to it.
- Then properly tighten it with the help of the knob, as shown in the image.
Assembling of Quick Release Plate
- Loosen the adjustment knob of the L-Bracket and slide the Quick Release Camera Plate onto the L-Bracket.
- After sliding the camera plate, tighten the adjustment knob properly.
NOTE: The Gimbal Head has a camera plate with 1/4ʹʹ-20 and 3/8ʹʹ-16 mounting screws fastened by the platform adjustment knob.
360° Rotation of Folding Gimbal Head
- Rotate the Gimbal head by loosening its knob.
- After rotating the Gimbal Head, tighten the knob again.
NOTE:
The head pans 360° while keeping the horizon straight using the bubble level
at the base of the head. Head has a 360° panoramic scale that allows easy pan
adjustments.
360° Rotation of L-Bracket
-
Loosen the top knob of the folding Gimbal Head and tilt the L-Bracket by 360°.
NOTE: The swing arm tilt horizontally and gives you extreme tilt angles to achieve a multi-dimensional shot as shown in the image.
-
Again, properly tighten with the help of the knob.
NOTE: Then tilting axis is locked independently using the tilt friction knob.
NOTE: The head pans and tilts a full 360°, facilitating extreme angles and smooth, balanced shots. The tilting axis are locked independently using the pan and tilt friction knobs.
-
Loosen the side knob of the Folding Gimbal Head and increase the height of the L- Bracket. Then securely tighten the knob again.
NOTE: You can increase the height of the L-Bracket according to your requirement by sliding the L-bracket along the Arca-Swiss clamp.
Camera Setup
-
Mount the Ball Head (Not Included) onto the Stand.
NOTE: The ball head offers smooth & accurate swivel rotation to your cameras, allowing you to achieve different angles. -
Loosen the locking knob of the Ball Head and slide the L-Bracket onto the Ball Head.
-
After sliding the L-Bracket, properly tighten the locking knob.
-
Now attach the camera (Not Included) to the camera plate by properly matching the threads and tighten with the help of a screwdriver.
-
Loosen the knob of the Ball Head and slide the camera onto it.
NOTE: There are multiple 1/4”-20 and 3/8”-16 threaded accessory sockets over the gimbal head for mounting LED panels, monitors and microphones, etc.
L-Bracket Setup
-
Open the L-Bracket by pressing its push pin, as shown in the image.
NOTE: The adjustment knob allows you to set the position of the camera (Not Included) as needed.
-
Set the camera position according to your requirement and tighten the knob again.
NOTE: The complete kit comes in a foam-based carrying bag with a padded strap for added protection and comfort.
YOUR PROAIM FOLDING CAMERA GIMBAL HEAD TRIPOD ALL DRESSED UP AND READY TO
GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty
We offer one year warranty for our products from the date of purchase. Within this period of time, we will repair it without charge for labor or parts. The warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability
We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, or lack of care of the product, or service by anyone other than our company.
Contact Us:
In case of any kind of dissatisfaction, please Contact us immediately and we
promise our utmost support and care until you use our product.