qtx PAR54 4 In 1 LED PAR Can User Manual

June 9, 2024
qtx

PAR54
4in1 LED PAR Can
Item ref: 154.035UK User Manual

Please read through this manual thoroughly before use, any damage
Caused by misuse of product will not be covered by warranty.

PAR54 4 In 1 LED PAR Can

Thank you for choosing the PAR54, a lightweight and compact LED PAR Can fitted with 9x 6W 4-in-1 RGBW LEDs. This unit can be controlled by auto, sound-to- light, master/slave programs or via 8 channel DMX. A versatile and value solution for background wash illumination requirements.

In the box:

Your PAR54 should arrive with you in a single carton in good condition. The carton should contain 1 x main unit with bracket and screws, 1x remote control, 1 x UK IEC mains lead and 1 x user guide.

Warning:

To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then check the unit before continuing use.
Please do not open cover, contains high voltage. This product is not serviceable or repairable by the end user. Please refer to qualified personnel for service and repair.

Placement:

  • Use the included mounting bracket to fix to a stand or lighting truss
  • Keep away from damp or dusty environments
  • Ensure adequate airflow around the fixture housings
  • Ensure adequate access to controls and connections

Cleaning:

  • Use a soft cloth with a neutral detergent to clean the casing as required
  • Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
  • Do not use strong solvents for cleaning the unit

Rear panel controls:

  1. Manual control buttons
  2. DMX Signal in
  3. DMX signal out
  4. LED display
  5. IEC power in (fused)

Manual control menu:

Press the “MENU” button to enter the settings menu.
Press “UP” and “DOWN” buttons to navigate through various setting functions.
Press “ENTER” button to save the desired setting.

Menu Number range Function and description
A001 A001-A512 DMX512 address setting
IrYE IrYE or Irno IR remote control on or off
AU01 AU01-AU07 Manual colour selection
FF00 FF00-FF99 Colour jump setting (speed slow to fast)
EE00 EE00-EE99 Colour fade setting (speed slow to fast)
CC00 CC00-CC99 Colour pulse setting (speed slow to fast)
F000 F000-F255 Strobe setting (speed slow to fast)
SoUD SoU0-SoU9 Sound to light colour jump setting (sensitivity high to low)
SUnD SUn0-SUn9 Sound to light colour pulse setting (sensitivity high to low)
r000 r000-r255 Red dimming (0-100%)
G000 G000-G255 Green dimming (0-100%)
b000 b000-b255 Blue dimming (0-100%)
u000 u000-u255 White dimming (0-100%)
o000 o000-o255 IR remote control dimming (dark to bright)

Remote control:

The PAR54 is supplied with an I.R. remote control for quick access to most of the basic functions of the unit. This has a maximum range of approximately 4-5m and must be aimed towards the front of the unit. Controls and functions are listed on the diagram below:

1. Power = Remote on/off 8. Sound = Sound activated mode
2. + = Increase option setting 9. — = Decrease option setting
3. DMX = DMX512 open/off 10. Green = Green open/off
4. Auto = Automatic mode 11. Blue = Blue open/off
5. Red = Red open/off 12. White = White open/off
6. Motor = Manual colour select 13. Flash = Strobe open/off
7. Jump = Colour jump mode 14. Gradual = Colour fade mode

DMX mode:

The PAR54 can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct start address by using the “UP” and “DOWN” buttons and “ENTER” to confirm. This unit has 8 DMX channels as indicated in the table below:

Channel Value Function
CH1 0-255 Master dimming (0-100%)
CH2 10-255 Strobe (speed slow to fast)
CH3 0-50 CH1-CH6 control
051-100 Manual colour selection
101-150 Colour jump
151-200 Colour fade
201-250 Colour pulse
CH4 0-255 Function speed control (slow to fast)
CH5 0-255 Red dimming (0-100%)
CH6 0-255 Green dimming (0-100%)
CH7 0-255 Blue dimming (0-100%)
CH8 0-255 White dimming (0-100%)

Specifications:

Power supply 110-240Vac, 50/60Hz (IEC)
Power consumption 36W
Fuse rating F3A
LED quantity 9 x 6W RGBW
DMX channels 8
Beam angle 45°
Dimensions 205 x 205 x 80mm
Weight 955g

Troubleshooting:

No power (mains) Check mains voltage is correct, and outlet is switched on
No light output Check IEC lead and fuse (if fuse continually blows, refer to

your dealer)
Unresponsive to DMX| Check control panel mode settings
Check DMX settings from controller (dimmer levels, blackout etc.)
Check that unit is in DMX mode and ensure DMX address remains lit to
confirm receiving DMX signal
Check DMX controller is not set to black out
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/cutting out| Ensure adequate ventilation and unit is not too close to a heat source

This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.
Copyright© 2022 AVSL Group Ltd, Unit 2 Bridgewater Park,
Taylor Road, Trafford Park, Manchester. M41 7JQ.

AVSL (Europe) Ltd, Unit 3D North Point House,
North Point Bus. Park, New Mallow Road, Cork, Ireland.
www.avsl.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals