Better Music Builder DFS-710 10 Inch 2-Way Full Range Speaker Owner’s Manual
- June 9, 2024
- Better Music Builder
Table of Contents
Better Music Builder DFS-710 10 Inch 2-Way Full Range Speaker Owner’s
Manual
SAFETY INSTRUCTIONS
PLEASE READ THIS MANUAL FIRST
Thank you for buying M product. Read this manual first as it will help you operate the system properly. Please keep this manualfor future reference.
WARNING: This product must be installed by professionals. When using
hanging brackets or rigging other than those supplied with the product, please
ensure they comply with the local safety codes.
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
WARNING: To reduce the risk of electric shock, only qualified
professionals can remove the cover of this system.
CAUTION
RISK OF ELECTRICAL SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
**** The lighting flash & arrowhead symbol within an equilateral triangle is intended to alert you that this part is not dielectric, and may cause the hazard of electric shock
The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and servicing instructions.
System Features
- 2-Way full range passive loudspeaker
- 1 x 10” high power low frequency transducer
- 1 x compression driver with 1.4” titanium diaphragm
- 2 x NL4 connector
- Dynamic Fusion Technology™ (DFT)
- Enclosure constructed of 15 mm plywood with durable painting
- 100° x 90° wide dispersion can set better coverage
- Frequency response 55Hz~18kHz
- Sensitivity 97dB
- Computer stimulation design technology ensures good frequency response and excellent phase feature
- Integral 35mm pole mount receptacle for stand or vertical installation.
Description
DFS-710 10” 2-Way full range passive loudspeaker. The system comprises of
1×10” high-power low frequency transducer and 1×1.4” diaphragm compression
high frequency driver.
Big dynamic and high sensitivity, clear & penetrating at high frequency, good
bass sound.
Applications
- Medium conference room
- Multifunctional halls
- Live performance
NL4 Connection
-
Connect
-
Disconnect
Technical Specification
- System: Passive full range wooden speaker with painting
- Tweeter: 1 x 1.4” diaphragm compression driver
- Woofer: 1 x 10” high power low frequency transducer
- Frequency response (-3dB): 55Hz~18kHz
- Sensitivity (1W@1m): 97dB
- Rated Impedance: 8 Ohms
- Maximum SPL: 120 dB (126 dB peak)
- Power Rating: 250W (RMS) 1000W (PEAK)
- Dispersion (H x V): 100°× 90° (H × V)
- Construction: 15 mm, plywood
- Installation: M8 hanging point
- Connector: 2 x NL4 Speakon
- Cabinet Dimensions (W×H×D): 11.8×20.5×13.4 in 30×52.1×34 cm
- Net Weight: 28.7 Lbs / 13 Kg
System Connection Reference
Attention: The impedance of connected speaker must match the impedance of
amplifier output.
Attention: Make sure the polarity of speaker and amplifier correctly.
Speaker Testing Method
-
Frequency Response
Use Pink noise to test the speaker in the anechoic chamber, adjust the level to make the speaker work at its rated impedance and set the output power at 1W, then test the frequency response lm away from the speaker. -
Sensitivity
Use full range Pink noise which has been modified using an EQ curve to test the speaker in the anechoic chamber, increasing the signal to make the speaker work at its rated impedance and set the power output at 1W, then test the sensitivity 1m away from the speaker. -
MAX.SPL
Use full range Pink noise which has been modified using an EQ curve to test the speaker in the anechoic chamber, increase the signal to make the speaker work at its maximum power output level, then test the SPL1 m away from the speaker. -
Rated Power
Use Pink noise to the IEC#268-5 standard to test the speaker, increase the signal for a continuous period of100 hours, the rated power is the power when the speaker will show no visible or measurable damage.