Omni O301 Locator User Manual
- June 9, 2024
- Omni
Table of Contents
Omni O301 Locator
Product Overview
The pet locator is used for pet tracking and positioning; The terminal has 4G network remote control, GPS real-time positioning, Bluetooth communication, mobile detection, and positioning tracking. The terminal interacts with the background and Bluetooth and mobile app through 4G network to realize real- time position monitoring of pets.
Product Features
The Built-in large-capacity rechargeable polymer lithium-ion battery with long working time. The Built-in microphone for voice monitoring. The Built-in three-axis accelerometer can realize the movement detection function. The Built-in GPS positioning module can quickly determine the pet’s position. The Built-in WiFi and Bluetooth communication functions can directly communicate with mobile apps. The Built in nano SIM card 4G wireless communication module, can report real-time location and other information through the operator’s wireless network IP67 waterproof grade.
Technical Parameter
Basic parameters
Item | Description |
---|---|
Input Voltage | 4.9-5.5VDC |
Input Current | ≥ 1000mA(5VDC ) |
Battery Voltage
/Capacity
| 3.7V/1200mAH Rechargeable polymer lithium-ion battery
Battery Life| ≥ 20 hours (It depends on data reporting frequency and network
conditions)
| Working Temperature| -20~+60℃
---|---|---
Waterproof grade| IP67
Shell material| PC+10%GF
Overall size| length, width and height:70.5mm × 34.4mm × 21.9mm
Rope length| Adjustable max. 40cm
SIMCard| NANO-SIM card
4G network parameters
Product version | Use area | 4G network parameters |
---|
**** North American Edition
| ****
North America
| ****
**** B2/B4/B5/B7/B12/B13
Position parameter
Item | Description |
---|---|
Positioning mode | GPS,GLONASS,BeiDou, Galileo, WiFi assisted positioning |
Receiving sensitivity | -158dBm |
Start time
| Cold start is less than 120 seconds and hot start is less
than 30 seconds (open ground, sunny days, no shelter, including coordinate optimization time)
Positioning accuracy| ****
≤15m (open land, no shelter in sunny days)
Positioning conditions| The number of search satellites ≥ 4, and the SNR is greater than 30dB
Bluetooth Parameters
Item | Description |
---|---|
Working Frequency | 2.4GHz |
Bluetooth version | BLE5.2 |
Communication distance | ≥ 10m (open area) |
Charging line and interface
Item | Description |
---|---|
Length | 950mm |
External Diameter | 3mm |
Basic Function Description
It supports single positioning, continuous positioning, tracking, and positioning modes, and the moving track recording can remotely issue instructions to obtain the current vehicle position information. Support GPS, GLONASS, Beidou, Galileo, and WiFi-assisted positioning.
4G communication
Through the server command, you can remotely obtain the pet’s location,
battery power, temperature, and other information
OTA upgrade
Support remote firmware upgrade and Bluetooth upgrade through the server.
Movement detection
It can be positioned according to whether the pet moves on or off, so as to
save power
Security fence
When it exceeds the set activity range, the locator will automatically push
the message to the app through the network to realize the alarm of pet
movement beyond the area.
Moving track recording
You can view the pet’s moving route within a certain period of time through
the
Tracking and positioning
You can view the real-time location of the user terminal (mobile phone) and
pets through the app to quickly find pets
Outline Dimension
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Locator meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluations of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6W/kg averaged over one gram of tissue. Device
types: Locator (FCC ID: 2AI2O-O301) has also been tested against this SAR
limit. The highest SAR value reported under this standard during product
certification is 0.671W/kg when properly worn on the body. This device was
tested for typical body-worn operations with the back of the Locator kept 0mm
from the body.
To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 0cm separation distance between the user's body and the back of the Tablet PC. The use of belt clips, holsters, and similar accessories should not contain metallic components in their assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements and should be avoided.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not
be co-located or operating in conjunction with any other antenna
or transmitter. This equipment has been SAR-evaluated for use in hand. SAR
measurements are based on a 0mm spacing from the body and that compliance is
achieved at that
distance.www.omnicontroler.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>