BirdDog Dante NDI Bridge Windows 10 Application User Guide
- June 6, 2024
- BirdDog
Table of Contents
BirdDog Dante NDI Bridge Windows 10 Application
A SHORT WALK THROUGH DANTE NDI BRIDGE
- Choose your Network Adaptor (your Dante Network).
- Activate or Deactivate the BirdDog Comms Pro compatibility.
- Dante to NDI
- If No. of Audio Channels is set on “6 Channels”, you need to choose an NDI Output Name for your Dante to NDI.
- If No. of Audio Channels is set on “Stereo Pair”, you need to choose all 3 NDI Output Names for your Dante to NDI.
- NDI to Dante
- You need to select which NDI Source you prefer to use.
- Once the above settings are complete you can activate Dante with the toggle.
- Once running you can turn ON/OFF Dante to NDI or NDI to Dante (these functions are only active once Dante is turned on as per instruction
NOTE:
To modify the NDI Output Name or the NDI source, you need to turn OFF the Dante main toggle ( )5 To access the free Dante Controller just press the CONFIGURE button on the top-right side. ( ).7 Dante Controller is required to be running somewhere on the network.
IMPORTANT NOTES
Ensure Internet connection Install NDI Tools click here Install Dante Configuration click here
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>