Beijer ELECTRONICS MAEN327 CloudVPN Gateway Ethernet LTE User Guide
- June 9, 2024
- Beijer ELECTRONICS
Table of Contents
Beijer ELECTRONICS MAEN327 CloudVPN Gateway Ethernet LTE
Foreword
The CloudVPN Routers are developed to satisfy the demands of remote access of
systems. Built-in functions such as VPN connectivity, cloud-based VNC, and
much more.
The CloudVPN Router is easy to set up and use and provides a secure connection
to your machines.
Order no: MAEN327
Copyright © 2022-10 Beijer Electronics. All rights reserved.
The information in this document is subject to change without notice and is provided as available at the time of printing. Beijer, including all its group companies, reserves the right to change any information without updating this publication. Beijer, including all its group companies, assumes no responsibility for any errors that may appear in this document. Read the entire installation manual prior to installing and using this equipment. Only qualified personnel may install, operate or repair this equipment. Beijer, including all its group companies, is not responsible for modified, altered, or renovated equipment. Because the equipment has a wide range of applications, users must acquire appropriate knowledge to use the equipment properly in their specific applications. Persons responsible for the application and the equipment must themselves ensure that each application is in compliance with all relevant requirements, standards, and legislation with respect to configuration and safety. Only parts and accessories manufactured according to specifications set by Beijer, including all its group companies, may be used.
BEIJER, INCLUDING ALL ITS GROUP COMPANIES, SHALL NOT BE LIABLE TO ANYONE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE INSTALLATION, USE, OR REPAIR OF THIS EQUIPMENT, WHETHER ARISING IN TORT, CONTRACT, OR OTHERWISE. BUYER’S SOLE REMEDY SHALL BE THE REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE, AND THE CHOICE OF THE APPLICABLE REMEDY SHALL BE AT THE SOLE DISCRETION OF BEIJER, INCLUDING ALL ITS GROUP COMPANIES.
Introduction
Thank you for purchasing the CloudVPN Router. The CloudVPN Router is the standard and most supported hardware for Beijer Electronics’s acirro+ remote access. The CloudVPN Router makes it convenient to remotely connect to your equipment, while the built-in firewall keeps your equipment safe from outside threats. Configuration is as easy as inserting a USB flash drive, which contains your configuration file, into the CloudVPN Router’s USB port. The configuration file can be generated from the [Tools] page on the acirro+ remote access.
Configuration is as easy as inserting a USB flash drive, which contains your configuration file, into the CloudVPN Router’s USB port. The configuration file can be generated from the [Tools] page on the acirro+ remote access.
Technical support
If for any reason you need technical assistance, please have a look at our
easy-to-read and exhaustive online support articles and guides
(support.global@beijerelectronics.com).
Our technical support is available from 8:00 to 17:00 Central European Time,
Monday through Friday, and will answer your questions as soon as possible.
If you have a comment, question, or suggestion about any of our products, services, or manuals, don’t hesitate to let us know.
Product Overview
Seamlessly integrated with the acirro+ remote access, the CloudVPN Router is the fastest and safest way to connect your machine to the cloud.
Product family
The CloudVPN Router is available in several variations. No matter your
situation, you can always connect your machine to the cloud.
Article no.| Ethernet| 3G (Global)| LTE (Global)|
WiFi
---|---|---|---|---
600-0001| X| | |
600-0002| X| X| |
600-0003| X| | X|
600-0004| X| x| x| X
Note:
The 3G, 4G, and Wi-Fi models require antennas, purchased separately. SIM cards
for the 3G, and 4G models can be purchased through a telecom provider.
What’s in the box
The following list describes the contents of the package:
- CloudVPN Router
- Female 4-pin plug-in connector with screw connection. (model: Weidmuller BL 5.08/04/180 SN BK BX or equivalent)
Hardware overview
The CloudVPN Router is created with performance and a multitude of hardware
capabilities in mind.
Note:
4G SMA connectors
CloudVPN Router 4G variants have 2 SMA antenna connectors. The one closest to
the power connector is the MAIN. The other connector is the DIV. Always
connect an antenna to the MAIN. Connecting an antenna to the DIV is optional.
Note:
4G & Wi-Fi SMA connectors
The 4G &Wi-Fi variant has 2 SMA antenna connectors. The one closest to the
power connector is for. The other connector is for Wi-Fi.
Label
The label can be found on the left side of the CloudVPN Router.
Specifications
The specifications below are applicable to all CloudVPN routers. The LTE and Wi-Fi variants each have additional specifications, listed separately.
Specification|
---|---
Power supplu (recommended)| 12-24 VDC +/- 20% LPS 2A
Power consumption| 10W max, about 2.5-5W* idle
Operating temperature| -20°C to +65°C
Relative humidity| 10 to 95% non-condensing
Operating altitude| Up to maximum 2000m
Storage temperature| -20°C to +65°C
Storage humidity| 10 to 95% non-condensing
Storage altitude| Up to maximum 3000m
Ethernet ports| Five 1 Gbps (4x LAN, 1x WAN)
USB| USB 2.0
Processor| MIPS 800 MHz
Digital Input| Yes
Degree of protection| IP20
Mounting| DIN rail
Size| 95 x 116 x 28mm (excl. DIN rail clip)
Weight| 270-310 gram
Certifications| CE, cULus Listing, FCC Verification, REACH
Warranty| 2 years
LTE additional specifications:
Specification|
---|---
Power supply (recommended)| 12-24 VDC +/- 20% LPS 2A
Power consumption| 10W max, about 2.5-5W* idle
Operating temperature| -20°C to +65°C
Specification|
---|---
Relative humidity| 10 to 95% non-condensing
Operating altitude| Up to maximum 2000m
Storage temperature| -20°C to +65°C
Storage humidity| 10 to 95% non-condensing
Storage altitude| Up to maximum 3000m
Ethernet ports| Five 1 Gbps (4x LAN, 1x WAN)
USB| USB 2.0
Processor| MIPS 800 MHz
Digital Input| Yes
Degree of protection| IP20
Mounting| DIN rail
Size| 95 x 116 x 28mm (excl. DIN rail clip)
Weight| 270-310 gram
Certifications| CE, cULus Listing, FCC Verification, REACH
Warranty| 2 years
Specification|
---|---
4G-G protocols and frequencies (Global)| FDD-LTE- B1, B2, B3, B4, B5, B7, B8,
B12, B13, B18, B19, B20, B25, B26, B28
TDD-LTE – B38, B39, B40, B41WCDMA – B1, B2, B4, B5, B6, B8, B19
GSM/GPRS/EDGE – 850, 900, 1800, 1900 MHz
Speed| LTE-FDD – Max.100Mbps (DL)/Max.50Mbps (UL)
LTE-TDD – Max.61Mbps (DL)/Max.18Mbps (UL)
DC-HSPA+ – Max.42Mbps (DL)/Max.5.76Mbps (UL)
TD-SCDMA – Max.4.2Mbps (DL)/Max.2.2Mbps (UL)
WCDMA – Max.384Kbps (DL)/Max.384Kbps (UL)
EDGE – Max.236.8Kbps (DL)/Max.236.8Kbps (UL)
GPRS – Max.85.6Kbps (DL)/Max.85.6Kbps (UL)
CSD – 14.4Kbps
SIM size| Standard SIM card (size 2FF)
FCC ID (4G-A only)| XMR201903EG25G
FCC ID (4G-A only)| XMR201605EC25A
Specification|
---|---
WI-FI IEEE 802.11 version| b/g/n
WI-FI modes| Station (Client) Mode and Access Point
Speed| 72Mbps
FCC ID| XPYLILYW1
Dimensions
The CloudVPN Router is designed to be easily installed on a standard DIN rail.
The small size of the CloudVPN Router allows you to make efficient use of
space.(Unit of measurement: millimeter.)
Installation
Note:
Install in an enclosure
These devices are open-type and are meant to be installed in an enclosure that
is only accessible with the use of a tool and is suitable for the environment.
When designing the layout of your system, always separate the devices that generate high voltage and high electrical noise from the low-voltage, logic- type devices such as the CloudVPNRouter.
Also consider the heat-generating devices and locate the electronic-type devices in the cooler areas of your cabinet. Reducing the exposure to a high- temperature environment will extend the operating life of the CloudVPN Router. Consider also the routing of the wiring for the devices in the panel. Avoid placing low-voltage signal wires and communications cables in the same tray with AC power wiring and high-energy, rapidly-switched DC wiring.
The CloudVPN Router is designed to be cooled using natural convection. For proper cooling, you must provide a clearance of at least 25 mm above and below the device. Also, allow at least 25 mm of depth between the front of the device and the inside of the enclosure. Because Beijer Electronics’s CloudVPN Router is essentially a small computer, the CloudVPN Router can be used for many different purposes. You can, for example, access, program, and control industrial machines around the globe. Do not use the Cloud VPN Router unless you’ve received proper training or have proper knowledge about the CloudVPN Router and its capabilities. It is expected that the user is knowledgeable about networking settings and is aware of the potential consequences i.e. security.
Installing and removing from DIN rail
The CloudVPN Router can be easily installed on a standard DIN rail. (1) Hang
the device on the rail and (2) push the unit down until you feel a click. To
remove the unit, (A) pull/rotate the device up and (B) lift off the rail
.
Installing a SIM card
The SIM card slot suits a standard SIM card (size 2FF).
To insert, push the SIM card into the slot until you feel a click. This is approximately 1 mm inside the device. Release the card and the card will stay in the device. The end of the SIM card should be aligned with the outside of the enclosure. To remove it, push the SIM card firmly into the slot until you hear a click. Releasing will cause the SIM card to partially eject, allowing you to easily take out the card.
Power supply
The CloudVPN Router must be powered by an IEC/UL/EN/60950-1 certified Limited
Power Supply (LPS) or for the United States a Class 2 power supply. The LPS
power supply is not included in this package.
| Power supply | 12-24 VDC +/- 20% LPS 2A |
|---|---|
| Internal voltage protection | 29V max |
| Input protection | Protected against polarity inversion |
| Isolation | 1.5 kV |
Wiring
Proper grounding and wiring of all electrical equipment are important to help ensure the optimum operation of the CloudVPN Router and to provide additional electrical noise protection for your application. The CloudVPN Router comes with a female 4-pin plug-in connector with a screw connection (type: Weidmuller BL 5.08/04/180 SN BK BX). The optimal wire diameter is 1.5mm² (16AWG – 12AWG).
|
---|---
Wire size range| 18 – 12 AWG
Wire strip length| 7 mm
Terminal screw torque| 0.4 N m
Max wire length| 3 m
Min ground conductor| 16 AWG
Digital input
By default, the Digital Input is not configured and doesn’t need to be wired.
The digital input provides a way to locally manage the CloudVPN Router’s VPN
connection (ON/OFF). The wiring is depicted in the image above..
| Type | Optocoupler |
|---|---|
| Voltage range | 0-29 VDC |
| Voltage range (OFF state) | 0-3 VDC |
| Voltage range ON state) | 7-29 VDC |
| Current-voltage (ON state) | 2-5 mA (typically) |
Shield
Connect the theShieldpin oftheCloudVPN Router with the protective earth
conductor (PE), min. core diameter Cu 1.5 mm².
Operation
Configure the CloudVPN Router
To configure your CloudVPN Router, log in to your acirro+ remote access account
and navigate to the [Tools] page. Here you can generate a CloudVPN Router
configuration file by following a few simple steps. You can then download the
configuration file, which must be copied onto a USB flash drive. After supplying
power to the CloudVPN Router, insert this USB flash drive in the USB port. The
CloudVPN Router will register itself to Beijer Electronics’s acirro+ remote
access and set up a secure VPN connection. You can further configure the
CloudVPN Router via the acirro+ remote access
(https://cloudvpn.acirroplus.com).
LED status indicators
The CloudVPN Router has two LEDs for router status: one signal LED (3G, 4G,
Wi-Fi signal) and one activity LED. The CloudVPN Router requires approximately
2 minutes to boot up and set up a secure connection.
Signal LED
Variantdependent: Ethernet only (2.5W), othervariants (5W)
Activity LED
Warning:
This action cannot be undone! All settings will be reset to factory default.
The CloudVPN Router can be reset to the factory default settings by pressing and holding the reset button on top for 5 seconds. The ACT LED will blink while the reset button is pressed. Upon release of the button, the ACT LED will rapidly blink if the button was pressed long enough to trigger a reset. Wait for the CloudVPN Router to restart. You can then configure the CloudVPN Router again.
Note:
Remove previous registration
If the CloudVPN Router was previously registered on the acirro+ remote access
you’ll have to remove it from the acirro+ remote access before you can
register it again.
Connectivity requirements (for local IT)
The CloudVPN Router uses an outgoing port to establish a secure connection to our acirro+ remote access. This means there is no need to open any incoming ports in your firewall.
Overview
Below is an overview of the outgoing ports and protocols that the CloudVPN Router utilizes.
| Port | Transport | Application |
|---|---|---|
| 443, 8443(1) | TCP | HTTPS, MQTT (TLS), |
OpenVPN
53(2)| TCP and UDP| DNS
(1)Port 8443 is only used when the stealth mode is active for connectivity via a censored internet connection (i.e. when located in China).(2)DNS requests are often handled by local DNS servers. In those cases, the listed DNS port can be ignored.
Servers and DNS requests
Via these outgoing ports, the CloudVPN Router connects to different Beijer
Electronics servers: REST API, MQTT, and OpenVPN servers. The IP addresses of
these servers, as well as the number of servers, may change over time and are
thus not pre-defined. What is pre-defined is the domain of these servers. This
domain will always end with “.ixon.net” (i.e. am01.ixon.net). The CloudVPN
Router attempts to resolve these addresses by doing DNS requests. If it can’t
perform DNS requests, it can’t connect to our servers.
MAC or IP addressfilter
The local IT department may choose to only grant specific devices internet
access, based on the MAC address or IP address of the device. The MAC address
can be obtained from the label on the side of the CloudVPN Router. The IP
address can be set to a static IP address. However, by default the IP address
is set to be assigned dynamically via DHCP.
Compliance
Applicable European directives
The CloudVPN Router is in conformity with the provisions of the following
European Directives.
| Directive | Description |
|---|---|
| EMC Directive 2014/30/EU | Product safety |
| Radio Equipment Directive 2014/53/EU | Use of the radio spectrum |
| RoHS Directive 2015/863 | Restriction of hazardous substances |
| REACH Directive 1907/2006 | Regulation and registration of chemicals |
| WEEE Directive 2012/19 | Waste of electronic equipment |
Applicable safety standards
The CloudVPN Router was tested and passed the following standards.
| Standard | Description |
|---|---|
| EN 55032:2012/AC:2013 | Electromagnetic Compatibility of Multimedia. |
Equipment
EN 301 489-1 V1.9.2 (2011-09)| EMC Standard for Radio Equipment and Services,
Part 1: Common technical requirements
EN 301 489-3 V1.4.1 (2002-08)| EMC Standard for Radio Equipment and Services,
Part 3: Specific conditions for Short-Range devices.
EN 61000-6-1:2007| Electromagnetic compatibility (EMC) – Part 6-1: Generic
standards – Immunity for residential, commercial and light-industrial
environments
EN 61000-6- 3:2007/A1:2011/AC:2012| Electromagnetic compatibility (EMC) – Part
6-3: Generic standards – Emission standard for residential, commercial and
light-industrial environments
EN 61000-6-2:2005/AC:2005| Electromagnetic compatibility (EMC) – Part 6-2:
Generic standards – Immunity for industrial environments
Standard| Description
---|---
EN 61000-6-4:2007 + A1:2011| Electromagnetic compatibility (EMC) – Part 6-4:
Generic standards – Emission standard for industrial environments
EN 61000-4-2:2009| Electrostatic discharge immunity test
EN 61000-4-3:2006 + A1:2008 + A2:2010| Radiated, Radio-frequency,
Electromagnetic Field Immunity Test 80-1000 MHz
EN 61000-4-4:2012| Burst Immunity Test
EN 61000-4-5:2014 + A1:2017| Surge Immunity Test
EN 61000-4-6:2014| Immunity to Conducted Disturbances, Induced by Radio-
frequency Fields
IEC 60950-1:2006 + A1:2009 + A2:2013| Information Technology Equipment Safety,
Part 1: General Requirements – Edition 2
EN 62368-1:2014/AC:2015| Audio/video, information and communication technology
equipment – Part 1: Safety requirements
EN 50581:2012| Restriction of the use of certain hazardous substances (RoHS)
in electrical and electronic equipment
UL 60950-1| Information Technology Equipment Safety, Part 1: General
Requirements – Edition 2
CSA C22.2 No. 60950-1-07 +
Amendment 1 and Amendment 2
| Information Technology Equipment Safety, Part 1: General Requirements – Edition 2
FCC compliance
The base equipment (an unintentional radiator) has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual, may cause interference with radio and television reception.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or TV reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note:
Changes or modifications of this equipment not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The CloudVPN Router contains different FCC certified modules, depending on the variant.
Article Number.| Enclosed module| FCC IDs (LTE)| FCC IDs
(Wi-Fi)
---|---|---|---
600-0001| –| –| –
600-0002| 4G (Global)| XMR201903E- G25G| –
600-0003| Wi-Fi| –| XPYLILYW1
600-0004| 4G (Global) and Wi-Fi| XMR201903E- G25G| XPYLILYW1
Additional information for variants with wireless capabilities
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
The antenna(s) used with this transmitter must be installed with a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any other antennas or transmitters. Only those antenna(s) tested with the wireless transmitters or similar antenna(s) with equal or lesser gain may be used.
Certifications
The CloudVPN Router has been certified for:
- CE certification (for more information, see our Declaration of Conformity).
- FCC verification
- cULus listing (ID #E492721)
Head office
Beijer Electronics AB
Box 426
20124Malmö,Sweden
www.beijerelectronics.com +46 40 358600.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>