Calculated Industries 7434 AccuMASTER 2 in 1 Digital Angle Gauge User Guide
- June 13, 2024
- CALCULATED INDUSTRIES
Table of Contents
Calculated Industries 7434 AccuMASTER 2 in 1 Digital Angle Gauge
Product Information
AccuMASTER Digital Angle Gauge
The AccuMASTER Digital Angle Gauge is a precision measuring tool designed to
accurately measure angles and find true level settings.
It is a 2-in-1 device that can be used as a digital level and angle gauge,
making it ideal for various applications such as checking angles on saw
blades, jointer fences, drill press and band saw tables, bevels, and other
precision tools. It is also useful for welders, fabricators, installers, or
anyone who needs to find true level and precise angle settings.
The device comes with a factory calibration for maximum accuracy, but users can recalibrate it if necessary. It features a digital LCD display with a backlight that stays on while the device is in use. The gauge is powered by two long-life AAA batteries, which are included, and it also comes with a protective pouch for safe storage.
The device has an inclination icon that shows the user in which direction they need to move an object to get it to level. The direction is measured relative to the right side of the gauge. If the short line of the inclination icon is above the longer line, it indicates that the right side needs to be lowered. If the short line is below the longer line, it indicates that the right side needs to be raised.
It is important to note that if the angle gauge is tipped back more than 45 degrees, the display will show an error message.
Product Usage Instructions
- Remove the plastic battery tab before using the device. Two AAA batteries are included.
- Press the ON/OFF button to power on the device. The display backlight will stay on until the device is turned off.
- To turn off the device, press and hold the ON/OFF button. The device will automatically turn off after 3 minutes of inactivity.
- To measure an angle, turn on the device and place it on the surface being measured.
- Press the MODE button to switch between degrees, %, mm/m, or in/ft.
- If you need to move the device to read the display, press the HOLD button to freeze the measurement. The icon will be displayed. Press the HOLD button again to return to measuring mode.
For further information or assistance, you can visit the AccuMASTER website at www.accuMASTER.com or contact their customer support at 1.888.610.7664. You can also reach out to their sales team via email at sales@calcert.com.
Visit
AccuMASTER.com to see our entire line of AccuMASTER precision measuring tools.
Setting 0° Calibration
Note: The device is calibrated in the factory for maximum accuracy.
User can re-calibrate if necessary.
- Turn off the device and place it on a flat, smooth surface.
- While the device is still off, press the ON/OFF and HOLD buttons together until the display reads “CAL”.
- Press the HOLD button again and the display will now read “CAL1”.
- Without picking up the device, rotate it 180° and press the HOLD button again. The display will now read “CAL2”. The 0° calibration is now complete.
Inclination Icon
As shown in the drawings, the inclination icon shows you in what direction you need to move an object to get to level. The direction is measured relative to the right side of the gauge.
If the short line is above the longer line, the right side is high and needs to be lowered. Note that the arrow points down, the direction which the right side of the gauge should be rotated.
If the short line is below the longer line, the right side needs to be raised. Note that the arrow points up, the direction which the right side of the gauge should be rotated.
One large line indicates level, 0.0:
INSTRUCTION
If the angle gauge is tipped back more than 45 degrees, the display will show Err.
With the AccuMASTER 2-in-1 Digital Level and Angle Gauge you can find true level and precisely check angles on saw blades, jointer fences, drill press and band saw tables, bevels and many more precision tools. The AccuMASTER is also useful for welders, fabricators, installers or anyone who needs to find true level and precise angle settings.
- Accuracy: #0.2°
- Large, bright StayGlow ™ display stays on as long as you’re using it
- Magnetically attaches to blades, tables and more
- Finds both true level and relative angles
- Reversible display (reads upside down)
- IP54 certified – dust and water resistant
- NCLUDES: 2-year warranty, 2 long-life AAA batteries and a protective pouch
Operation
-
Remove plastic battery tab before use. Two AAA batteries are included.
-
Press ON/OFF button to power the device. The display backlight stays on until the device is turned off.
Press and hold ON/OFF button to turn off. The device will turn off after 3 minutes of inactivity. -
To measure an angle, turn on and put the device on the surface being measured.
-
Press MODE to switch between degrees, %, mm/m or in/ft.
-
If a surface isn’t level, but you want it to be your level starting point, you can manually set it to 0° by pressing SET O. The S icon will display. Press SET O again to cancel the function.
-
If you need to move the device to read the display, press the HOLD button to freeze the measurement.
The H icon will display. Press HOLD again to return to measuring mode.
The LCD Display
- HOLD – save measurement
- MODE – shows degrees, %, IN/FT, mm/m
- Indicates tilt direction
- SET O – set current level to 0°
- Battery life
1.888.610.7664
www.calcert.com
sales@calcert.com