Lenco MC-460 Stereo with CD and Turntable User Manual

MC-460 Stereo with CD and Turntable
User Manual

Hifi set with internet, DAB+, FM radio, CD player and turntable

CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.

2. Install in accordance with the supplied user manual.

3. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.

4. Avoid using the device near strong magnetic fields.

5. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.

6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.

7. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.

8. The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit  and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.

10. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

12. Keep away from animals. Some animals enjoy biting on power cords.

13. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids.
    To remove severe stains, you may use a damp cloth with dilute detergent.

14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.

15. Do not interrupt the connection when the device is formatting or transferring files.
    Otherwise, data may be corrupted or lost.

16. If the unit has USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use an USB extension cable because it can cause  interference resulting in failing of data.

17. The rating label has been marked on the bottom or back panel of the device.

18. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.

19. This product is intended for non professional use only and not for commercial or industrial use.

20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.

21. Never remove the casing of this device.

22. Never place this device on other electrical equipment.

23. Do not allow children access to plastic bags.

24. Only use attachments/accessories specified by the manufacturer.

25. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when  liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.

26. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

27. If the product is delivered with power cable or AC power adaptor:
    • If any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel.
    • Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which  may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
    • Unplug this device during lightning storms or when unused for a long period.
    • The socket outlet must be installed near the equipment and must be easily accessible.
    • Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
    • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
    • Devices with class 2 construction do not require a earthed connection.
    • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
    • Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.

28. If the product contains or is delivered with a remote control containing coin/cell batteries:
    Warning:
    • “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
    • [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and  can lead to death.
    • Keep new and used batteries away from children.
    • If the battery compartment does not close securely, stop using the product and keep it away from children.
    • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

29. Caution about the use of Batteries:
    • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
    •  Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
    • Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
    • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
    • Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or that leakage of flammable liquid or gas.
    • A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
    • Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

WARNING
Class 1 Laser Product

Warning: Do not touch the lens.

FRONT VIEW

REAR VIEW

REMOTE CONTROL

input letters and numbers
10. Stop play button| 21. Dimmer
11. EQ button| 22. Sleep

Before Started

Network Requirement

1. Before using the Lenco MC-460,the following requirements are needed:
2.  A broadband connection in combination with a wired/wireless access point, router or similar network device.
3. The network device needs to support WIFI (802.11b/g/n) wireless connection. (Only 2.4 Ghz)
4. A PC or smart phone with a network ready. This network has to be the same one as the Lenco MC-460 equipped with.

Symbols on the dislay

| Connection is being established, device functioning
---|---
No wireless connection
Wireless connection established
FM radio reception: Mono
FM radio reception: Stereo
FM radio function select
AUX signal source selected
Speaker off
Search
Alarm on
Radio station saved as preset
FM radio station saved
Start Recording
Stop recording

Getting stared

BATTERY INSTALLATION (REMOTE CONTROL)
Battery installation:

1. Press the tab on the battery door and slide it off.
2. Install two (2) x AAA size batteries into the battery compartment as the figure on right and the polarity markings inside the battery compartment.
3.  Slide the battery door back

BATTERY INSTALLATION (REMOTE CONTROL)

Battery Precautions:
Follow these precautions when using a battery in this device:

1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated in the battery compartment. A reversed battery may cause damage to the device. (manufacturer’s directions).
3. Do not dispose batteries in fire. They may explode or leak.
4. Clean the battery contacts and also those of the device prior to battery installation.
5. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
6. If the batteries in the device are consumed or the device is not to be used for a long period of time, remove them.
7. Do not try to re-charge normal batteries; they can overheat and explode

Speaker connect:

1. The speaker on the left is connected to the L terminals of device, the red cable of speaker is connected to the red terminals, the black cable is connected to the black terminals.
2. The speaker on the right is wired the same as the left speaker.

The packaging box contains following items:

Get the network ready
For wireless LAN (WLAN) network connection:
Check if WLAN LINK/ACT light of the wired/wireless access point or router illuminated.
Consult the user guide of that for any questions.

Note: WiFi allows date transfer over short distances within 20 meters without the need of cabling between the devices. Any walls or cellings may reduce the quality of the  WiFi connectivity.
Therefore try to locate the Lenco MC-460 and/or the access point within the distance above, and avoid any obstacles between two devices.
Make sure you are connecting to a 2.4Ghz Wifi network! (this device is not compatible with 5 Ghz Wifi networks)

INITIAL SETUP

1. When it is first time running the device, it will ask you to set Language and Network Configurations.
   

2. Do you want to check the WIFI network availability when powering on the device? Use the Navigation wheel to select the desired option and press the Navigation wheel to confirm.

3. 3.1. Select YES if you want to continue and connect to your WIFI network using the standard method. Press the Navigation wheel to confirm. Continue reading  ‘network configuration’ option 1.
   3.2. Select YES (WPS) if you would like to set up with the WPS (WIFI PROTECTED SETUP) function of your router (please verify with your router’s manual if it’s  available). Press the Navigation wheel to confirm. Continue reading ‘network configuration’ option 2.
   3.3 Select NO and Press the Navigation wheel to confirm if you want to skip the Wireless network setup. You can configure it later in the configuration menu.

NETWORK CONFIGURATION

Standard network configuration
When selecting this option the MC-460 will scan for available WIFI networks.

Select your WIFI network by turning the Navigation/OK wheel and confirm by pressing the Navigation/OK wheel.
If your selected WIFI network requires a password, you can enter it in the next screen.

Enter your password by pressing the numeric keys on the remote control, followed by the Navigation right button (NOTE: you have to press the navigation right after every
character).
To make a correction, press the Navigation Left to go backwards and delete the last character at the same time. When the password is completed, press the OK button to confirm.
If you want to enter the password directly on the MC-460 front panel, you can turn the Navigation wheel to select the first character and then press the button to move forward to the next character. To make a correction, press the button to go back and delete the last character at the same time.
When the password is completed, press the Navigation/ok button to confirm.
Note: following characters can be used:
Numbers (from 0-9)
LATIN letters (from A to Z and from a to z)
Characters (@, Blank,!,”,#,$,%,&,*,’,+ and (,)

It may take a few seconds to establish the connection to the network.
Main Menu

Once the connection is established, the main menu appears with the main menu items:

| Internet Radio: For listening radio via the internet.
---|---
Media Center: For listening music via USB or UPnP
Information-Center: Weather Information, Financial Information, System Information.
AUX: For listening music via an external audio source.
Configuration: For the settings menu.
Local Radio: Shortcut for „Local Radio“ of the section „Internet Radio“.
DAB+: For listening music via DAB+.
FM: For listening music via FM.
Bluetooth: For Wireless music transmission from smartphone or tablet Bluetooth (range 10m, depending on the environment)
Vinyl: For vinyl playback
CD: For CD playback

CONFIGURATION

Here you can configure various parts of your Lenco MC-460 press ‘Enter’ to select the configuration menu.

Time
Display| Analog/Digital
---|---
Manage| When it is enabled, my mediaU will show on the main menu. If various
mediaU accounts exist in the Radio, Select the default login account in here.
my mediaU
Network| Wireless Network Configuration: Enable/disable WiFi network. When you enable the WiFi network, the system  will automatically select the required AP. Enter WEP or WPA code to connect the WiFi.
Wireless Network (WPS PBC): If you are using a router with WPS/QSS button, you can set up the network  connection easily via WPS function.
Enter it and go to press the WPS/QSS button on your router within 120 seconds. The connection between the  router and device will then be configured automatically.
Manual Configuration: You can choose DHCP (which assigns the ip address automatically) or manually input the  IP address for wireless network connection. The following information has to be entered: SSID (name of access point), IP Address, subnet mask, default gateway, preferred DNS server, alternate DNS server.
Check Network When Power On: Enable/disable WiFi network. When you enable the WiFi network, the system  will automatically search for available AP. Select the required AP.

Internet Radio

From the main menu use the Navigation wheel/ok to select INTERNET RADIO and press the Navigation wheel/ok to start.
Now you can use the Navigation wheel again to scroll through the different menu options and select the desired option by pressing the Navigation wheel Press to return to  the previous menu.
After successfully connecting to a radio station, the station information will be shown. This information can be changed by pressing the or button.
Below you find the explanation of the various Internet Radio menu options:
My Favorite
These are your favorite preset stations. It can hold up to 250 entries.
To add a favorite internet radio station, press and hold the “PRESET” button on the remote control to save the station as a favorite.
You can add favorites when playing the station you want to add as favorite or add them directly from the ‘Radio Station/Music’ list. Press and hold the “PRESET” button on  remote control to save it.

You can replace already saved favorites with a new favorite station.
Favorite radio stations cannot be stored twice The saved stations are showed by selecting this menu. You may also press “PRESET” on remote control to enter the saved station list.
You may enter the number key on the remote control to recall the saved station.
Selecting a radio station from the favorites list.
Press “PRESET” on the remote control to show the favorites list. Rotate the navigation wheel or press the navigation keys on the remote control to move through the  favorites list. Press the navigation wheel or press “OK” on the remote control to listen to the selected favorite.
Enter a submenu with button, Delete, Shift Up/Down along the list, Rename, Play, or Use as Alarm (if you chose internet as alarm sound in the alarm configuration).
Radio Station/Music
Radio Stations are categorized into sub categories Global Top 20, Genre, Country/Location (Africa, Asia, Europe, Middle East, North America, Oceania/Pacific and South  America) and Highlight. Press the navigation wheel or ‘OK’ on the remote, to select the subcategories and choose a station to listen to. For each station, press the navigation  wheel on the unit or ‘OK’ on the remote control to play directly.
Press to enter its submenu. When you choose Auto Scan, it plays each station in this subcategory for 30 seconds until all stations have been played. You can cancel the auto  scan function by pressing “OK”. Press the button to view information about the active radio station.

Sleep Radio:
You can choose Birds, Lullaby, Piano, Rain, Spa, Space, Wave and White Noise as sleep radio.
History:
List of the ten recently listened stations.
Service: Search Radio Station: Enter a stations name/keyword to search through the list of all radio stations.
Add New Radio Station: by using an IP address/web address, the added station will be stored in the ‘My Favorite’ list.
App: scan the QR code to download the AirMusic Control App
Note that the maximum character of the station name is 250

Air Music APP
You can use the Air Music control App to control your MC-460 with your smartphone or tablet like you would do with the remote control.
You can download the Air Music App by scanning the QR code from Android or Apple store like below.

My mediaU
Display and playback your own mediaU station list on the mediaU server. Set your account first. To activate your own station list, follow the steps below:
Access http://www.mediayou.net/. Join my mediaU membership. Login to the website;
Enter the wireless MAC addresss of Radio to the mediaU website. This information can be obtained in the menu -> information Center > System information > Wireless Info;

When successfully configured, you are able to save and view your own mediaU station playlist(s). Username and password is not required to enter to the Radio.
If there are different devices stored in your MediaU account, you can choose the one you currently use under Configuration menu. On the website, you may save stations to  Favorite Station, set Favorite Location/Genre and My Local City, or add stations manually. The stations can be viewed from My Media mode on the Radio.
My Favorite: List of saved favorites. You can call or edit them, e.g. move or delete. To save a station, press and hold the [PRESET] button while a station is being received.  The same station can only be saved once.
Radio Station/Music: List of all radio stations. Search for the desired country and radio stations yourself. Categories of channels are Global Top 20, Genre, Country / Region  and Highlight.
Local Radio: Automatically accesses the radio station in your area. This has the advantage that you only need to search for the radio station you want to hear (the radio station to be tuned can be changed under the settings).
History: Lists the recently listened radio stations.
Service: Search for radio stations or add new ones.
My MediaU
For using My mediaU, you have to register at the following webpage: www.mediayou.net.
After this is done, you have to register your device at this website. This can be done by clicking ’’my mediaU“>> „Radio“. Enter the device‘s name (free to choose, it‘s just a  name that you can remember), and the serial number, not free to choose. You can find the serial number under: Informations-Center >> System Information >> Wireless  Info >> MAC Address: You have to input this MAC Address at the website under serial number. Please note that this serial number is case sensitive.

Now you can add new radio stations under my mediaU (2 left of „Radio“).

After you have added the radio stations the next steps will be done at the device.
Search for Configuration >> Manage my mediaU and ensure, that this setting is set to: „Enabled“

Now select my mediaU at the selection menu. Here you can see your previously added radio stations

Technical Specifications

Connections| AC cord, 3.5mm AUX-IN,
Line out, L/R speaker output
---|---
Input| AC 100-240V ~ 50/60Hz, 1.5A Max.
Output power| 2 x 20W RMS
Remote control batteries (not included)| 2x AAA
Power consumption| 45W (Max)
Power consumption (standby)| < 1W
Power consumption (network standby)| < 2W
 Bluetooth version| 5
WIFI| 2.4 Ghz (n/a/ac)
Operating Temperature| 0°C-35°C
Operating position| Horizontal
Dim. Unit| 372 x 135 x 335mm
Dim. Speaker| 200 x 155 x 132mm
Weight| 6.5kg

Guarantee

Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your  local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ  slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to particular situation. No legal right or entitlements  may be obtained from the description made in this manual.

Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will  help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic  Equipment Directive).

DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type [Lenco MC-460] is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity is  available at the following internet address: https://commaxx- certificates.com/doc/mc-460_doc.pdf

Service
For more information and helpdesk support, please visit www.lenco.com
Commaxx B.V. Wiebachstraat 37, 6466 NG Kerkrade, The Netherlands.

References

• Lenco.com | Officiële Lenco Webshop‎
• Lenco.com | Officiële Lenco Webshop‎
• mediaU – Your Best Choice of Internet Radio Portal !
• mediaU – Your Best Choice of Internet Radio Portal !

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>