FABER FVC 600 Handheld Corded Vacuum Instruction Manual

FABER FVC 600 Handheld Corded Vacuum Instruction Manul

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precaution should always READ ALL INSTRUCTIONS BEFORE USING (THIS APPLIANCE)

1. The Vacuum Cleaner is an electric appliance. It must be used in accordance with the operating conditions of the instructions. This instructions should be kept properly for future reference.

2. Check and con firm that the vacuum cleaner voltage must be consistent with the supply voltage.

3. It is strictly forbidden to inhale the following objects, otherwise it may damage the vacuum cleaner or cause fire. heating objects, such as carbon fire etc

   • large cuts of sharp fragments, such as glasses etc
   • harmful substances, water & liquids ( solvents, corrosive, etc )
   • Fiammable and explosive goods, such as gasoline, alcohol products

4. When cleaning, repairing or temporarily not use the vacuum cleaner, the power supply must be turn o. When the power supply is cut o, pull the power cord and pull the plug out by holding the plastic part of the plug by  hand.

5. Remember do not immerse the main vacuum cleaner in water, avouid approaching to heating equipment or exposure to the sun to avoid fire.

6.  Do not let children play with the vacuum cleaner to avoid accidents

7. In the following cases, do not use vacuum cleaner

   • Fall and obvious damange or abnormal movement.
   • Power line is damaged
     When these happens, do not turn on the machine and send it to the maintenance service department designated by our company in time.

8. Avoid running for a long time in the condition of the suction inlet is bloacked, to avoid damage to the motor and heat generation of the vacuum cleaner.

9. If the soft wire of the power supply is damaged, in order to avoid a danger, it must be replaced by professional manufacturer, its maintenance department or similar department

SAVE THESE INSTRUCTIONS
when using the appliance, do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from trac area and where it will not be tripped over. Always unplug when not in use, do not around cord.

PRODUCT PARTS LIST

1. MAIN BODY
2. POWER CORD BUTTON
3. POWER CORD
4. HEPA
5. FILTER NET
6. DUST CUP
7. DUST CUP RELEASE BUTTON
8. CONNECTION TUBE BUTTON
9. CONNECTION TUBE ASSEMBLY 10. SWIVEL HEAD
10. FLOOR BRUSH 12. SOFA BRUSH 13. NOZZLE
11. ADAPTER (OPTIONAL) 15. WALL HOLDER

GENERAL USAGE & SAFETY GUIDELINE

HOW TO USE

Before use : make sure that all products packaging has been removed.
Vacuuming Function:

• Fit the extension tube and fioor brush to the vacuum cleaner
• To disconnect the extension tube from the vacuum cleaner, press the button to disconnect the tube from the main body where is situated in the rear side and pull the extension tube.

INSERTION OF ACCESSORIES INTO THE APPLIANCE’S GRIP :

• The appliance’s grip is deisgned in such a way that it allows the insertion of the following accessories (use the combination that best meets your requirements)
• Extension tube : designed to provide access to surfaces which are out of reah and make fioor cleaning comfortable
• Floor brush : specially designed for cleaning flors (both rugs, carpets and hard fioor)
• Lance : specially designed for getting into cracks and dicult corners
• Multi-use brush : specially designed for multipurpose use. For instance to clean a sofa.
• Connector pipe : connect the accessories and the main body.

INSERTION OF THE ACCESSORIES :

• Introduce connector pipe in the vacuum hole
• Introduce the accessories (lance or multi-use brush) in the connector pipe

USE:

• Connect the appliance to the mains
• Turn the appliance on, by using the ON/OFF button

ONCE YOU HAVE FINISHED USING THE APPLIANCE :

• Turn the appliance OFF using the ON/OFF button
• Unplug the appliance from the mains
• Clean the appliance

CARRY HANDLE :

• The appliance has a handle on the upper part of the body, which facilitates comfortable transportation

CLEANING

Disconnect the appliances from the mains and allow it to cool before undertaking any cleaning task

• Clean the equipment with a damp cloth with a few drops of washing-up liquid and then dry
• Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance
• Never submerge the appliance in water or any other liquid or place it under running water

EMPTYING THE DUST COLLECTOR :

• Empty the dust collector when it is full (observation facilitated by transparent windows), or when vacuuming power is notably reduced.
• Disconnect the dust collector from the appliance
• Extract the fiters from the dust collector and empty the contents into the appropriate waste disposal receptacle
• Check the condition of the dust collector filter
• Resemble the fiters and the dust collector

CHANGING THE FILTERS :

Air entry filter, it is advisable to be changed at least once a year or every 50 hours of the appliance’s use.

TO REMOVE THE FILTERS :

• Disconnect the dust collector from appliance
• Extract filters rom the dust collector
• Reassemble the filters and the dust collector

SUPPLIES :

Supplies can be acquired from distributors and authorise establishments ( such as filters, etc… ) for your appliance model

• Always use original supplies, designed specifically for your appliances model
• These supplies are available in service center

ANOMALIES AND REPAIR

• Take the appliance to an authorise technical support service if the product is damaged or other problems arise.
• Do Not attempt to disassemble or repair the appliance yourself as this may be dangerous

FOR EU PRODUCT VERSIONS AND/OR IN CASE THAT IT IS REQUESTED IN YOUR COUNTRY : ECOLOGY AND RECYCLABILITY OF THE PRODUCT

• The materials of which the packaging of this appliance consisits are included in a collection, classification and recycling system. Should you wish to dispose of them, use the appropriate public recycling bins for each type of material
• The product does not contain concentrations of substances that could be considered harmful to the environmen.

SPECIFICATIONS

CIRCUIT DIAGRAM

This symbol means that in case you wish to dispose of the product once its working life has ended; take it to an authorized waste agent for the selective collection of Waste from Electric and Electronic Equipment (WEEE)

This appliance complies with Directive 2014/35/EC on Low Voltage, Directive 2014/30/EC on Electromagnetic Compatibility, Directive 2011/65/EU on the restrictions of the use of certain hazardous substances in electrical and electronic equipment and Directive 2009/125/EC on the eco design requirements for energy-related products.

Dibuat untuk dan diedarkan oleh :
FIMACO SDN BHD
8-2, WISMA FIAMMA,
No.20, Jalan 7A/62A,
Bandar Manjalara, 52200 Kuala Lumpur, Malaysia.
CUSTOMER CARE CENTRE : +603 6279 8888

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>