Bedsure BS-HP1224 Weighted Heating Pad for Back Pain User Manual

: June 4, 2024
: Bedsure

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
Parts
Care and Maintenance
Electrical Specifications
WARRANTY AND CUSTOMER SUPPORT
WASHING INSTRUCTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HEATING PAD -FOR PERSONAL USE ONLY- IMPORTANT NOTICE
read the entire manual carefully before using this service
MODEL #BS-HP1224

IMPORTANT SAFETY INSTRUCTIONS

DO NOT DESTROY
When using this or any other electrical appliance, always follow these basic safety precautions:

Hot Surfaces

Do not sit on pad.
Do not use while sleeping.
Never position pad underneath the body.
Do not fold pad.
Avoid sharp folds that may damage the product.

DANGER.- To reduce the risk of burns, electric shock, and fire, this product must be used in accordance with the following instructions.

DANGER: TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, FIRE, AND PERSONAL INJURY, THIS PRODUCT MUST BE USED IN ACCORDANCE WITH THE FOLLOWING INSTRUCTIONS:

READ ALL INSTRUCTIONS.
DO NOT USE WHILE SLEEPING.
DO NOT USE ON AN INFANT OR ON AN ANIMAL.
THIS PAD IS NOT TO BE USED ON OR BY AN INVALID,
A SLEEPING OR UNCONSCIOUS PERSON, A PERSON WITH DIABETES, OR A PERSON WITH POOR BLOOD CIRCULATION.
DO NOT USE ON AREAS OF INSENSITIVE SKIN.
BURNS CAN OCCUR REGARDLESS OF CONTROL SETTING. CHECK SKIN UNDER PAD FREQUENTLY.
DO NOT USE IN AN OXYGEN ATMOSPHERE.
DO NOT USE PINS OR OTHER METALLIC MEANS TO FASTEN THIS PAD IN PLACE.
DO NOT BUNCH, SIT ON OR AGAINST OR CRUSH PAD-AVOID SHARP FOLDS.
NEVER PULL THIS PAD BY THE SUPPLY CORD.
DO NOT USE THE CODE AS A HANDLE.
THIS UNIT SHOULD NOT BE UESD BY CHILDEN WITHOUT ADULT SUPERVISION.
PLACE PAD ON TOP OF AND NOT UNDER THE PART OF THE BODY NEEDING HEAT.
USE THIS PAD ONLY ON A 110-120 VOLT AC CIRCUIT. UNPLUG WHEN NOT IN USE. DO NOT USE WITH GENERATORS, POWER CONVERTERS, OR INVERTERS.
DO NOT TAMPER WITH THIS PAD IN ANY WAY.
THERE ARE NO USER-SERVICEABLE PARTS. IF FOR ANY REASON THIS PAD DOES NOT FUNCTION SATISFACTORILY, SEE WARRANTY FOR CONSUMER SERVICE INFORMATION.
DO NOT USE THIS PAD WITH LINIMENT, SALVE OR OINTMENT PREPARATIONS, ESPECIALLY ONES THAT CONTAIN HEAT-PRODUCING INGREDIENTS. SKIN BURNS COULD RESULT.
DO NOT BEND OR PINCH CORD AND DO NOT USE IF CORD IS DAMAGED.
NEVER LEAVE THE APPLIANCE UNATTENDED, ESPECIALLY IF CHILDREN ARE PRESENT.
LOOP CORD LOOSELY WHEN STORING. TIGHT WRAPPING MAY DAMAGE CORD AND INTERNAL PARTS.
WITH NOT IN USE, STORE THE HEATING PAD IN THE ORIGINAL PACKING, IN A DARK, COOL, DRY PLACE.
SAVE THESE INSTRUCTIONS.

THIS APPLIANCE HAS A POLARIZED PLUG(ONE BLADE IS WIDER THAN THE OTHER). TC REDUCE THE RISK OF ELECTRIC SHOCK, THIS PLUG IS INTENDED TO FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL DOSE NOT FIT, CONTACT A UALIFIED ELECTRICIAN TO INSTALL THE ROPER OUTLE DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.

This heating pad has a polarized plug (one blade is wider than the other) as a safety feature. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT ATTEMPT TO DEFEAT THIS SAFETY FEATURE.

Parts

1. Heating Pad
2. Pad Connector
3. Control Connector| 4. Control
5. Power Cord/Plug
---|---

CONTROLLER COMPONENTS & FUNCTION DESCRIPTION

– Display
– ON/OFF Button
• Turn on with the switch button, the default level is the standby level 01, press the “+” “-” button to regulate the setting up to level highest 06.
– Time Setting Button
• Press the time setting button, the display lasts for 2.0 hours by default, press the “+” “-” button to adjust the timing, If there is no operation after
ﬂashing for 3 seconds, it will return to the previously set heating level.
– + and – Buttons
• Press the “+” and “-” buttons to adjust the heating level （01-02-03-04-05-06 ）and the timing （1.0-1.5-2.0)H.

AUTO SHUT-OFF MODE
This product will turn off after a set duration of time. Setting times have 1.0, 1.5 and 2.0 Hours. WARNING: Burns can occur regardless of the control setting; check skin under Pad frequently. Unplug the product when it is not in use.

CAUTION
Before each use, always inspect the product to ensure there is no damage to the power cord, the control, or the pad.
The pad connector and control connector are designed to connect only one way. Align the inner prongs and then push together until connectors are touching
Check with your healthcare provider before using with a pacemaker or any medical device.
Do not plug into the wall outlet until you have connected the controller cord to the product.
Turn the product off by pressing the button and unplug it when it is not in use.

Moist Heat Option:

Gently dab/pat one side of the Pad with a wet sponge/cloth or use a spray bottle to apply a fine mist.
Make sure the Control Connector or Pad Connector is not sprayed or dampened.
WARNING: Do not use this product if Control or Pad Connectors are wet. Make sure the product connections are completely dry before using.
Place the moistened side of the Pad on top of the body.
Turn the product off by pressing the On/Off Button and unplug it when it is not in use.

Care and Maintenance

Disconnect the power cord from the electrical outlet.
Make sure the Pad Connector is disconnected from the Control Connector by pressing the tabs on the sides of the Control Connector while pulling the connectors apart.
Machine or hand wash the Pad using a mild detergent, cool water, and a gentle/delicate cycle.
Line dry or lay the Pad flat to dry. Do not tumble dry.
Make sure the product is completely dry before the next use.
Tostore the product, loosely roll the Heating Pad toward the Storage Straps, loop the Straps over the rolled ends, and then store it in a cool, dry, dark location after each use. Avoid sharply folding the Heating Pad.

Electrical Specifications

Voltage	Frequency	Wattage	Amperage
120 VAC	60 Hz	120W	0.97A

WARRANTY AND CUSTOMER SUPPORT

If you need help regarding product issues, after-sales service, or other relevant problems, please contact us via Amazon customer service or offcial website.
BEDSHE INTERNATIONAL CO., LTD. 20651 Golden Springs Dr., Ste. 277 Diamond Bar, CA 91789.USA

WASHING INSTRUCTIONS

Wash by hand or as follows in automatic washer using slow agitation and normal spin speed: Fill washer with warm water. Add minimum amount of all-purpose detergent, agitate to dissolve, measure heating pad before washing. Add heating pad and soak ﬁve minutes. Agitate two minutes. Spin. Fill for cool rinse, agitate one minute then spin. Tumble dry low., ﬁve minutes only, or line dry. Remove damp heating pad from dryer, block to original size, and drape to ﬁnish drying. Do not iron your heating pad.

FCC COMPLIANT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the product and receiver.
Connect the product into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.