Bedsure B093K3CXV5 Electric Heating Pad User Manual
- June 9, 2024
- Bedsure
Table of Contents
Bedsure B093K3CXV5 Electric Heating Pad
IMPORTANT SAFETY INSTRUCTIONS
DO NOT DESTTORY
DANGER: TO REDUCE RISKS OF BURNS ELECTRIC SHOCK, FIRE, AND PERSONAL
INJURY,THIS PRODUCT MUST BE USED IN ACCORDANCE WITH THE FOLLOWING
INSTRUCTIONS:
-
READ ALL INSTRUCTIONS.
-
DO NOT USE WHILE SLEEPING.
-
DO NOT USE ON AN INFANT OR ON AN ANIMAL.
-
THIS PAD IS NOT TO BE USED ON OR BY AN INVALID SLEEPING, HELPLESS OR UNCONSCIOUS PERSON, A PERSON WITH DIABETES, A PERSON WITH POOR BLOOD CIRCULATION OR INSENSITIVITY TO HEAT.
-
THIS APPLIANCE IS NOT TO BE USED BY CHILDREN. CLOSE SUPERVISION IS NECESSARY WHEN ANY APPLIANCE IS USED NEAR CHILDREN. CHILDREN SHOULD NOT PLAY WITH THE APPLIANCE.
-
DO NOT USE ON AREAS OF INSENSITIVE SKIN.
-
BURNS CAN OCCUR REGARDLESS OF CONTROL SETTING, CHECK SKIN UNDER PAD FREQUENTLY.
-
DO NOT USE IN AN OXYGEN ATMOSPHERE.
-
DO NOT USE PINS OR OTHER METALLIC MEANS TO FASTEN THIS PAD IN PLACE.
-
DO NOT SIT ON, AGAINST, OR CRUSH PAD -AVOID SHARP FOLDS. PLACE PAD ON TOP OF AND NOT UNDER THE PART OF BODY NEEDING HEAT.
-
. UNPLUG WHEN NOT IN USE. NEVER LEAVE APPLIANCE UNATTENDED, ESPECIALLY IF CHILDREN ARE PRESENT.
-
NEVER PULL THIS PAD BY THE SUPPLY CORD. DO NOT USE THE CORD AS A HANDLE. DO NOT PINCH CORD.
-
DO NOT TUCK IN, TRAP, FOLD, CROSS, PINCH OR WRAP CONTROLLER OR CORD WITH HEATING PAD DURING USE.
-
CAREFULLY EXAMINE PAD, COVER, CORD AND CONTROLLER BEFORE EACH USE. DISCARD THE PAD IF ANY SIGN OF DETERIORATION, WEAR OR DAMAGE. DO NOT TAMPER WITH THIS PAD IN ANY WAY. THERE ARE NO USER SERVICEABLE PARTS. IF PAD DOES NOT FUNCTION SATISFACTORILY, SEE WARRANTY FOR CONTACT CUSTOMER SERVICE.
-
LOOP CORD LOOSELY WHEN STORING, TIGHT WRAPPING MAY
DAMAGE CORD AND INTERNAL PARTS. ALLOW TO COOL BEFORE STORING AND DO NOT CREASE BY PLACING ITEMS ON TOP OF IT.
STORE IN THE ORIGINAL PACKAGING, IN A COOL, DARK, DRY PLACE. -
USE THIS PAD ONLY AT RATED VOLTAGE, AS MARKED ON THE PRODUCT. DO NOT USE WITH GENERATORS, POWER CONVERTERS, OR INVERTERS.
-
DO NOT USE THIS PAD WITH LINIMENT, SALVE OR OINTMENT PREPARATIONS. SKIN BURNS COULD RESULT.
-
THIS APPLIANCE IS NOT INTENDED FOR MEDICAL USEIN HOSPITALS.
-
MODELS WITH A MASSAGE FUNCTION: NO NOT MASSAGE ABDOMEN WHEN PAIN IS PRESENT, OR AREAS THAT ARE SWOLLEN, INFLAMED) COVERED WITH SKIN ERUPTIONS OR UNEXPLAINED PAIN. CONSULT A PHYSICIAN BEFORE USING ANY EQUIPMENT OF THIS TYPE.
-
MODELS MAY CONTAIN FILLING MATERIALS (CLAY BEADS). IF FILLING MATERIAL IS RELEASED DUE TO PRODUCT DAMAGE, DISCONTINUE USE OF PRODUCT. DO NOT INGEST FILLING MATERIAL. IF FILLING MATERIAL IS INGESTED, SEEK MEDICAL ATTENTION.
-
DO NOT DRY CLEAN, DO NOT BLEACH, DO NOT IMMERSE IN WATER.
-
NEVER USE PAD IF THE PRODUCT FABRIC IS NOT INTACT
-
SAVE THESE INSTRUCTIONS.
RESET INSTRUCTIONS
If your heating pad unexpectedly shuts off (not including the Auto-Off setting feature), follow these steps:
- Unplug the unit.
- Wait 3 minutes.
- Plug unit in and operate normally.
HOUSEHOLD USE ONLY
NORTH AMERICAN MODELS WITH POLARIZED PLUGS:
THIS APPLIANCE HAS A POLARIZED PLUG (ONE BLADE IS WIDER THANTHE OTHER). TO
REDUCE THE RISK OF ELECTRIC SHOCK, THIS PLUG IS INTENDED TO FIT IN A POLARIZED
OUTLET ONLY ONE WAY IF THEPLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE
PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN TO INSTALL THE
PROPER OUTLET.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.
INSTRUCTIONS
- Plug into any 120 volt AC electrical outlet and turn the switch to the ON position.
- Place heating pad on the desired location with the lighter grey fabric against body.
- Select desired heat and/or massage level. To turn OFF, scroll through the remaining heat and/or massage settings by pressing the buttons sequentially, until LED indicator turns off.
- Wait for the pad to heat up.
- Avoid sitting on or crushing pad. Avoid folding during use.
CONTROLLER FEATURES
Power & Heat
- Press x1 = Low
- Press x2 = Med
- Press x3 = High
Massage
- Press x1 = Low Pulse
- Press x2 = Low Constant
- Press x3 = Low Speed Up & Down
- Press x4 = Med Pulse
- Press x5 = Med Constant
- Press x6 = LoMedw Speed Up & Down
- Press x7 = High Pulse
- Press x8 = High Constant
- Press x9 = LoHighw Speed Up & Down
AUTO-OFF FEATURE
This product includes an Auto-Off Feature: The heating function will turn off
automatically after 2 hours of continuous use, and the vibration feature will
turn off after 3o minutes of continuous use.
NOTE: After a power outage, the Auto-Off feature automatically resets the
timer.
WASHING INSTRUCTIONS
CAUTION: DO NOT DRY CLEAN! DO NOT BLEACH DO NOT USE WRINGER!
- Disconnect pad from outlet.
- Spot clean with damp rag or mild detergent.
- Lay flat to dry.
- Do NOT submerge in water.
- Do not plug in pad and pad connector until they are completely dry.
PRODUCT SPECIFICATIONS
| Pad Size: | 20″X24″ |
|---|---|
| Power: | Rating: 120V 60HZ 115 W |
| Auto Shut-Of Timer | Heat 2 Hours Massage 30Minutes |
9 Massage Setting： Auto Of 30Minutes
| Low Pulse Med Med Constant wn
Low Constant Speed Up & Do
Low Speed Up & Down High Pulse Med Pulse High Constant
High Speed Up& Down
3 Heat Settings: Auto Of 2 Hours
| ****
Low Temp Range (~115F) Med Temp Range (~130F) High Temp Range (~ 145F)
FAQ
What do I do if my heating pad unexpectedly shuts off or won’t turn on (not
including auto-off)?
If this occurs, simply unplug the unit from the outlet, wait 3 minutes, and
plug it back in.
What if I leave my pad on by accident?
It comes with a 2 hr. auto-off heat featur 30e and a 15 min. auto-off for the
vibration feature on the (deluxe model).
Can I sleep with my pad?
No one must lean on, or fall asleep on the pad.Falling asleep with the pad on
can cause burns and be a potential fire hazard.
FCC CERTIFIED
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This product has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This product generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be determined by
turning the product off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and receiver.
- Connect the product into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003.