Bedsure HMP-15080 Heated Mattress Pad User Manual

Bedsure HMP-15080 Heated Mattress Pad

Product Information

Specifications

• Brand : Unknown
• Type : Electric Blanket
• Model : Unknown
• Power Source : Electric
• Heating Levels : 1

Product Usage Instructions

General Guidelines
To ensure safe and efficient use of the electric blanket, please follow these guidelines:

• Do not fold the appliance while in use to prevent overheating and potential damage.
• Clean the electric blanket when necessary, ensuring it is completely dry before use.
• Do not chemically clean the electric blanket.
• Handle the packaging with care and dispose of it in an environmentally friendly manner.
• Avoid inserting pins or needles into the electric blanket.

Usage Instructions
Please follow these steps to use the electric blanket:

1. Unpack the electric blanket carefully, ensuring you do not damage any components.
2. Connect the electric blanket to a power source.
3. Adjust the heating level to the desired setting (only one heating level available).
4. Place the electric blanket on your bed or desired surface.
5. Ensure the electric blanket is spread out evenly and not folded or creased.
6. Turn on the electric blanket using the controller.
7. Wait for the electric blanket to warm up to the desired temperature.
8. Enjoy the warmth and comfort provided by the electric blanket.

Frequently Asked Questions (FAQ)

How do I clean the electric blanket?
When the electric blanket gets dirty, it should be cleaned. After cleaning, make sure it is completely dry before use.

Can I fold the electric blanket while using it?
No, folding the electric blanket while in use can cause overheating and may result in the product no longer working.

How many heating levels does the electric blanket have?
The electric blanket has only one heating level available.

Can I chemically clean the electric blanket?
No, chemical cleaning is not recommended for the electric blanket.

What should I do with the packaging?
Please dispose of the packaging in an environmentally friendly manner.

Can I insert pins or needles into the electric blanket?
No, avoid inserting pins or needles into the electric blanket as it may cause damage.

What if the product does not work?
If you encounter any issues with a new product, please verify the connections and refer to the troubleshooting section in the user manual.

Contact Information
If you have any further questions or need assistance, please contact BEDSHE INTERNATIONAL B.V. at the following address: BEDSHE INTERNATIONAL B.V. van Haestraat 14, 5921HS Venlo, Netherlands

INTRODUCTION

Thank you for purchasing the Bedsure Heated Mattress Pad. Please read this user manual carefully and keep it in a safe place for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

INCLUDED

• 1 × Heated mattress pad
• 1 x Hand-held controller
• 1 x User manual

Product Specifications

• Model : HMP-15080/HMP-140120/HMP-140160/HMP-165137
• Name : Heated Mattress Pad
• Rated Voltage : 220-240V
• Power Consumption : 50-60Hz
• Default Timing : 10 Hours
• Dimensions : 150x80cm/135x120cm/140x160cm/165x137cm
• Heating Levels : 1-2-3-4

IMPORTANT SAFETY INSTRUCTIONS DANGER:
TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, FIRE AND PERSONAL INJURY, THIS PRODUCT MUST BE USED IN ACCORDANCE WITH THE FOLLOWING INSTRUCTIONS:

1. IMPORTANT INSTRUCTIONS. RETAIN FOR FUTURE USE.
2. When not in use, store in a dry environment and avoid direct sunlight.
3. When storing the appliance, allow it to cool down before folding;
4. Do not crease the appliance by placing items on top of it during storage;
5. Examine the appliance frequently for signs of wear or damage. If there are such signs, if the Appliance has been misused or does not work, return it to the supplier before switching it on again;
6. This appliance is not intended for medical use in hospitals;
7. Do not use if wet;
8. This appliance must not be used by persons insensitive to heat and other very vulnerable persons who are unable to react to overheating;
9. Children under the age of three are not to use this ap- pliance due to their inability to react to overheating.
10. The instructions shall state that the appliance is not to be used by young children over the age of three unless the controls have been pre-set by a parent or guardian, and unless the child has been adequately instructed on how to operate the controls safely.
11. The appliance has a heated surface. to heat must be careful when using the appliance.
12. This appliance can be used by children aged from 8 and above and persons with reduced physical, sensory or mental capabilities or lack of experience and know- ledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
13. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
14. Don’t fold the appliance when use it in order to avoid overheat and product no longer working.
15. THE PRODUCT CAN ONLY USE WITH LY02A CONTROLLER.
16. IF the electric blanket is dirty. After cleaning, it must be completely dry before use.
17. Product works continuously on Heating Level “I”

Symbol Explanation

Correct Disposal of this product
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Product Diagram

Switching On

• Do not insert the mains plug inside the outlet before connecting the controller to the mattress pad.
• Align the coupler with the coupler connector first, then gently push to lock (as shown in the below pictures). Then connect the controller to the power supply.
• Press the “ ” button to turn on.

Note : Do not connect the controller to the power supply before connecting it to the product.

Temperature Adjustment
When the product is turned on, the lowest heating level will be activated by default. Press the button to adjust the heating level.

User Tip:
The fastest way to preheat is to set the product at the highest heating level after turning it on.

Switching Off
When the product works at the highest heating level, you can turn it off by pressing the button once.

Note : If the product is not to be used for a long time (like several days), please turn off it and pull out the mains plug, then disconnect the controller from the product. (Auto-off feature: The product will shut off automatically after 10 hours of continuous use; To restart it, please press the button on the controller.)

products provide safe heat and protect consumers’ skin within the temperature range based on international safety standards, which helps avoid low- temperature burns. Therefore, the temperature setting is for keeping warm instead of getting hot.| Not feeling warm enough, the heating level can be adjusted to the highest one first and after heating up lower down to a middle one.
When receiving the product, it does not work.| Product malfunctions.| When receiving the product, please take it out from the package and place it fiat (do not fold). Check the coupler and mains plug to see if they’re well connected, then switch on to check whether the product works normally. For product malfunctions, please contact

our customer service.

The product does not heat evenly.| The product is folded or the heating wires are coiled during use; There exists a co-heating phenomenon; The coverage areas vary.| Please place the mattress pad fiat for use. The temperature of the body areas that contact the heating zones is higher than the areas that do not, which is a normal phenomenon.
The product no longer works after being used for a period of time.| The product is not operated or washed properly.| Please contact our customer service.
If the above suggestions cannot solve the problems, this might result from the permanent switch-off protection via the safety system. In this case, please contact our customer service.

Due to continuing product development, The product inside the packaging may look slightly different.

BEDSHE INTERNATIONAL B.V. van Haeffstraat 14, 5921HS Venlo, Netherlands
MADE IN CHINA

Documents / Resources

| Bedsure HMP-15080 Heated Mattress Pad [pdf] User Manual
HMP-15080 Heated Mattress Pad, HMP-15080, Heated Mattress Pad, Mattress Pad, Pad
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>