Bedsure BS-HP2433 Heating Pad for Neck and Back Instruction Manual
- June 8, 2024
- Bedsure
Table of Contents
Bedsure BS-HP2433 Heating Pad for Neck and Back
IMPORTANT SAFETY INSTRUCTIONS
DO NOT DESTROY When using this or any other electrical appliance, always follow these basic safety precautions:
DANGER– To reduce the risk of burns, electric shock and fire, this
product must be used in accordance with the following instructions.
DO NOT DESTROY
DANGER: TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, FIRE, AND PERSONAL
INJURY, THIS PRODUCT MUST BE USED IN ACCORDANCE WITH THE FOLLOWING
INSTRUCTIONS:
-
READ ALL INSTRUCTIONS.
-
DO NOT USE WHILE SLEEPING.
-
DO NOT USE ON AN INFANT OR ON AN ANIMAL.
-
THIS PAD IS NOT TO BE USED ON OR BY AN INVALID,
A SLEEPING OR UNCONSCIOUS PERSON, A PERSON WITH DIABETES, OR A PERSON WITH POOR BLOOD CIRCULATION. -
DO NOT USE ON AREAS OF INSENSITIVE SKIN.
-
BURNS CAN OCCUR REGARDLESS OF CONTROL SETTING. CHECK SKIN UNDER PAD FREQUENTLY.
-
DO NOT USE IN AN OXYGEN ATMOSPHERE.
-
DO NOT USE PINS OR OTHER METALLIC MEANS TO FASTEN THIS PAD IN PLACE.
-
DO NOT BUNCH, SIT ON OR AGAINST OR CRUSH PAD-AVOID SHARP FOLDS.
-
NEVER PULL THIS PAD BY THE SUPPLY CORD.
-
DO NOT USE THE CODE AS A HANDLE.
-
THIS UNIT SHOULD NOT BE UESD BY CHILDEN WITHOUT ADULT SUPERVISION.
-
PLACE PAD ON TOP OF AND NOT UNDER THE PART OF THE BODY NEEDING HEAT.
-
USE THIS PAD ONLY ON A 110-120 VOLT AC CIRCUIT. UNPLUG WHEN NOT IN USE. DO NOT USE WITH GENERATORS, POWER CONVERTERS, OR INVERTERS.
-
DO NOT TAMPER WITH THIS PAD IN ANY WAY.
-
THERE ARE NO USER-SERVICEABLE PARTS. IF FOR ANY REASON THIS PAD DOES NOT FUNCTION SATISFACTORILY, SEE WARRANTY FOR CONSUMER SERVICE INFORMATION.
-
DO NOT USE THIS PAD WITH LINIMENT, SALVE OR OINTMENT PREPARATIONS, ESPECIALLY ONES THAT cONTAIN HEAT-PRODUCING INGREDIENTS. SKIN BURNS cOULD RESULT.
-
DO NOT BEND OR PINCH CORD AND DO NOT USE IF CORD IS DAMAGED.
-
NEVER LEAVE THE APPLIANCE UNATTENDED, ESPECIALLY IF CHILDREN ARE PRESENT.
-
LOOP CORD LOOSELY WHEN STORING. TIGHT WRAPPING MAY DAMAGE CORD AND INTERNAL PARTS.
-
WITH NOT IN USE, STORE THE HEATING PAD IN THE ORIGINAL PACKING, IN A DARK, COOL, DRY PLACE.
-
SAVE THESE INSTRUCTIONS.
THIS APPLIANCE HAS A POLARIZED PLUG(ONE BLADE IS WIDER THAN THE OTHER). TC REDUCE THE RISK OF ELECTRIC SHOCK, THIS PLUG IS INTENDED TO FIT IN A POLARIZED OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL DOSE NOT FIT, CONTACT A QUALIFIED ELECTRICIAN TO INSTALL THE PROPER OUTLE DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.
PARTS
- Heating Pad
- Pad Connector
- Control Connector
- Control
- Power Cord/Plug
CONTROLLER COMPONENTS & FUNCTION DESCRIPTION
- Display
- ON/OFF Button
- Turn on with the switch button, the default level is the standby level 01, press the “+” “-” button to regulate the setting up to level highest 06.
- Time Setting Button
- Press the time setting button, the display lasts for 2.0 hours by default, press the “+” “-” button to adjust the timing, If there is no operation after flashing for 3 seconds, it will return to the previously set heating level.
- + and – Buttons
- Press the “+” and “-” buttons to adjust the heating level （01-02-03-04-05-06）and the timing（1.0-1.5-2.0)H
AUTO SHUT OFF MODE
This product will turn off after a set duration of time. Setting times have
1.0,1.5 and 2.0 Hours Burns can occur regardless of the control setting; check
skin under Pad frequently. Unplug the product when it is not in use.
CAUTION
- Before each use, always inspect the product to ensure there is no damage to the power cord, the Control, or the Pad.
- The Pad Connector and Control Connector are designed to connect only one way. Align the inner prongs and then push together until Connectors are touching check with your healthcare provider before using with a pacemaker or any medical devices
- Do not plug into the wall outlet until you have connected the controller cord to the product
- Turn the product off by pressing the Button and unplug it when it is not in use.
Moist Heat Option:
-
Gently dab/pat one side of the Pad with a wet sponge/cloth or use a spray bottle to apply a fine mist.
-
Make sure the Control Connector or Pad Connector is not sprayed or dampened.
WARNING: Do not use this product if Control or Pad Connectors are wet. Make sure the product connections are completely dry before using. -
Place the moistened side of the Pad on top of the body.
-
Turn the product off by pressing the On/Off Button and unplug it when it is not in use.
Care and Maintenance
- Disconnect the power cord from the electrical outlet.
- Make sure the Pad Connector is disconnected from the Control Connector byy pressing the tabs on the sides of the Control Connector while pulling the connectors apart.
- Machine or hand wash the Pad using a mild detergent, col water, and a gentle/delicate cycle.
- Do not dry-clean this heating pad. Cleaning solvents may have a deteriorating effect on the insulation of the heating element.
- Line dry or lay the Pad flat to dry. Do not tumble dry.
- Make sure the product is completely dry before the next use.
- To store the product, loosely roll the Heating Pad toward the Storage Straps, loop the Straps over the rolled ends, and then store it in a cool, dry, dark location after each use. Avoid sharply folding the Heating Pad.
Electrical Specifications
- Voltage: 120 VAC
- Frequency: 60 Hz
- Wattage: 85W
WARRANTY AND CUSTOMER SUPPORT
If you need help regarding product issues, after-sales service, or other relevant problems, please contact us Via AmaZon customer service or official website. BEDSHE INTERNATIONAL CO, LTD. 20651 Golden Springs Dr, Ste. 277 Diamond Bar CA 91789.USA
WASHING INSTRUCTIONS
Wash by hand or as follows in automatic washer using slow agitation and normal
spin speed: Fill washer with warm water. Add minimum amount of all-purpose
detergent, agitate to dissolve, measure heating pad before washing. Add
heating pad and soak five minutes. Agitate two minutes. Spin. Fill for cool
rinse, agitate one minute then spin. Tumble dry low, five minutes only, or
line dry. Remove damp heating pad from dryer, block to original size, and
drape to finish drying. Do not iron your heating pad.
FCC COMPLIANT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against hamful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to Correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the product and receiver.
- Connect the product into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>