qtx PAR100W High Power LED Par Can User Manual

PAR100W High Power LED Par Can
User Manual

PAR100W
Item ref: 154.029UK
User Manual
White LED PAR Can

PAR100W High Power LED Par Can

Please read through this manual thoroughly before use, any damage Caused by misuse of product will not be covered by warranty.
Thank you for choosing the PAR100W, A lightweight and compact LED PAR Can fitted with 18 bright 1W cool white LEDs. This unit can be controlled by auto, sound-to-light, master/slave programs or via DMX and provides a great value solution for white background wash and spot illumination.

In the box:

Your PAR100W should arrive with you in a single carton in good condition. The carton should contain
1 x main unit with bracket and screws
1x remote control
1 x UK IEC mains lead and
1 x manual.

Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then check the unit before continuing use.
Please do not open cover, contains high voltage. This product is not serviceable or repairable by the end user. Please refer to qualified personnel for service and repair.

Placement:

• Use the included mounting bracket to fix to a stand or lighting truss
• Keep away from damp or dusty environments
• Ensure adequate airflow around the fixture housings
• Ensure adequate access to controls and connections

Cleaning:

• Use a soft cloth with a neutral detergent to clean the casing as required
• Regularly use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
• Do not use strong solvents for cleaning the unit

Rear panel controls:

1. Manual control buttons
2. DMX Signal in
3. DMX signal out
4. LED display
5. IEC power in (fused)
6. IEC power out

Manual control menu:
Press the “MENU” button to enter the settings menu.
Press “UP” and “DOWN” buttons to navigate through various setting functions.
Press “ENTER” button to save the desired setting.

Remote control:

The PAR100W is supplied with an I.R. remote control for quick access to most of the basic functions of the unit. This must be aimed at the front of the unit where there is a remote receiver and has a maximum range of approximately 4-5m. Controls and functions are listed on the diagram below:

1. Power = Remote on/off
2. Auto = Auto jump open/off
3. Mode = Auto fade open/off
4. Flash = Strobe open/off
5. — = Decrease option setting
6. R = First 6pcs LED open/off
7. G = Second 6pcs LED open/off| 8. Enter = Save option setting
9. Music = Sound to light mode open/off
10. Motor = Brightness select
11. + = Increase option setting
12. Dmx = DMX512 open/off
13. B = Third 6pcs LED open/off
14. W = No function on this model
---|---

DMX mode:
The PAR100W can be controlled by DMX signal, simply connect the DMX signal source to the DMX input on the unit via a balanced XLR lead. Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit. To enter DMX mode, select A001 from the menu and confirm the correct start address by using the “UP” and “DOWN” buttons and “ENTER” to confirm. This unit has 7 DMX channels as indicated in the table below:

Specifications:

Troubleshooting:

Check IEC lead and fuse (if fuse continually blows, refer to your dealer)
No light output| Check control panel mode settings
Check DMX settings from controller (dimmer levels, blackout etc.)
Unresponsive to DMX| Check that unit is in DMX mode and ensure DMX address remains lit to confirm receiving DMX signal
Check DMX controller is not set to black out
Check DMX controller is on correct fixture/page
Check master dimmer value
Check correct DMX address is set
Check DMX connection and leads
Overheating/ cutting out| Ensure adequate ventilation and unit is not too close to a heat source

This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.
Copyright© 2021 AVSL Group Ltd, Unit 2 Bridgewater
Park, Taylor Road, Trafford Park, Manchester. M41 7JQ.
www.avsl.com
AVSL (Europe) Ltd, Unit 3D North Point House,
North Point Bus. Park, New Mallow Road, Cork, Ireland.
154.029UK User Manual

References

• AVSL
• AVSL

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>