COMDRONIC AC6 Electronic Commissioning Meter User Guide

June 9, 2024
COMDRONIC

COMDRONIC AC6 Electronic Commissioning Mete logo

COMDRONIC AC6 Electronic Commissioning Mete

COMDRONIC AC6 Electronic Commissioning Mete logo

COMDRONIC AC6 Electronic Commissioning Mete 01

  • Press to exit / return to previous screen.
  • Press to accept.

Note:  Menu options shown in  red  may or may not appear in the menu lists, depending on the  selected valve and the precise setup of the handset being used.

Connection Procedure:

  1. Select the correct connection adaptors for the valve / device being measured and attach them to the connection tubes.
  2. Ensure that both isolating valves on the connection tubes are in the CLOSED position.
  3. Attach the connection adaptor on the RED connection tube to the high‐pressure (upstream) test point on the subject measuring valve / device.
  4. Attach the connection adaptor on the BLUE connection tube to the low‐pressure (downstream) test point on the subject measuring valve / device.
  5. Ensure that the equalizing valve on the AC6 unit is OPEN.
  6. Attach the free ends of the RED and BLUE connection tubes to the colour‐coded connection points on the AC6.
  7. OPEN the isolating valves on the connection tubes to allow the line fluid to purge any air from inside the tubes.
  8. CLOSE the isolating valves on the connection tubes.
  9. Find a safe and static position for the AC6 (the AC6 is very sensitive and readings will be affected if the handset is moved after a datum has been set).
  10. Switch the AC6 ‘ON’ and press ZERO to set the datum at zero (if the datum drifts from zero, allow the internal temp. of the handset to stabilize and re‐press ZERO).
  11. OPEN the isolating valves on the connection tubes and CLOSE the equalizing valve on the AC6.
  12. The AC6 will now be reading differential pressure. Refer to full Operating Instructions for details of the various display options available.
Disconnection Procedure:
  1. OPEN the equalizing valve on the AC6.
  2. CLOSE both isolating valves on the connection tubes.
  3. Disconnect the tubes from both the AC6 and the valve / device.

REFER TO FULL OPERATING INSTRUCTIONS FOR COMPREHENSIVE INSTRUCTIONS AND SAFETY CONSIDERATIONS

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals