qtx QTFX-LBF2 Led Bubble Fog Machine User Manual

qtx QTFX-LBF2 Led Bubble Fog Machine

Product Specifications:

• Product Name: QTFX-LBF2 LED BUBBLE FOG MACHINE
• Power : 800W
• Order Reference : 160.556UK

Product Usage Instructions

Warnings:

1. Do not expose electrical parts to rain or moisture to prevent fire or electric shock.
2. If liquids are spilled, disconnect mains, allow drying, and have it checked before use.
3. Avoid impact, dropping, or extreme pressure on the housing.
4. No user-serviceable parts inside – do not open the case.
5. Acclimatize the unit to room temperature before operating.

Safety and Cleaning:

1. Use a soft dry or slightly damp cloth to clean the casing.
2. Avoid strong solvents for cleaning the housing.
3. Clean the fog mechanism periodically with distilled water.
4. Use fog machine cleaning fluid (160.670UK) periodically.

Setting Up:

1. Unpack the QTFX-LBF2 unit.
2. Unscrew the top caps of the fluid tanks and remove to fill with the recommended fog fluid.

Operation (Top Control Panel):
The control panel functions include:

• MENU : Scroll through menu options.
• UP : Increase current menu value.
• DOWN : Decrease current menu value.
• ENTER : Save current menu value.

Operation (Wireless Remote):
The small RF remote control functions include:

1. Fog effect 40%/90%/off
2. Bubbles on/off
3. Fan 30%/80%/off
4. LED options for color control

A high-quality machine that combines a stream of bubbles with a powerful 800W fogger to produce a stunning smoke-filled bubble effect. The 8 bright LEDs on the front of the unit can be used to highlight the torrent of bubbles, producing an exciting and colourful effect that’s ideal for parties and events. The unit itself is made from hardwearing steel, which is covered in a glossy hammered finish making it easy to keep clean. It comes complete with a fully functional control panel and smaller RF remote for simple wire-free operation and is DMX compatible for more precise control or connecting to a 2nd unit when needed.

• 800W Fogger produces up to 3000 Cu.Ft/min
• Wand-free high output bubble machine
• 8 Bright 8W RGB+UV LED’s housed in the front panel
• In-built control panel with LCD display
• 433Mhz keyfob-style RF wireless remote
• 10 Channel DMX compatible for more precise control
• 1.2 Litre removeable fluid tanks for bubble and fog fluids
• Rugged steel design and hammered paint, wipe-clean finish

In the box

Please check the contents to ensure that the product has been received in good condition.

• QTFX-LBF2 LED Bubble Fogger
• RF Remote Control
• UK/EU Mains Leads
• Mounting bracket & screws
• User guide

If you find any accessory is missing or the machine has arrived with damage, please contact your local dealer at once. Do not try to fix this item yourself or you will invalidate the warranty. Please keep the original packaging and invoice for any possible replacement or return demands.

Warnings:

1. To prevent risk of fire or electric shock, do not expose electrical parts to rain or moisture.
2. If liquids are spilled on areas other than inside the fluid tanks, disconnect the mains, allow the unit to dry out and have it checked by qualified personnel before use.
3. Avoid any impact, dropping or extreme pressure to the housing.
4. No user-serviceable parts inside – do not open the case.
5. Allow the unit to acclimatize to room temperature before operating.
6. The QTFX-LBF2 has built-in fluid containers and should be operated in an upright position. Ensure that the unit is positioned on a stable, non-slip surface.

Safety and Cleaning

1. Check for correct mains voltage and condition of IEC lead before connecting to mains.
2. This unit must be earthed.
3. This unit uses a heating element – be aware that parts of the housing may be hot during use!
4. Use a soft dry or slightly damp cloth to clean the casing.
5. Do not use strong solvents for cleaning the housing.
6. Clean the fog mechanism periodically by operating with distilled water.
7. It is also recommended to use fog machine cleaning fluid (160.670UK) periodically.

Recommended Fluids:
The QTFX-LBF2 requires both fog fluid in the fluid tank and bubble fluid in the reservoir. For the efficient use of this unit we recommend the following QTX fluids:

Control Panels

Setting Up

1. Unpack the QTFX-LBF2 unit.

2. Unscrew the top caps of the fluid tanks and remove to fill with the recommended fog and bubble fluids.
   NOTE : Please ensure you fill the correct tanks with the correct fluid to avoid causing damage to the machine!

3. Replace the tanks and screw the caps securely, making sure that the pipes are fed down to the bottom to ensure a consistent flow of fluid.

4. Connect to a DMX controller via the DMX in socket if DMX control is required.

5. Connect a second unit to the DMX out socket if required.

6. Connect the IEC mains plug and power the unit on.

7. The unit will begin the warming up process which normally takes around 3-4 minutes.

8. After use, remember to empty both fluid tanks if the machine is not to be used for a significant period of time.

Operation

Top Control Panel

• MENU: Press to scroll through the menu options (see below table).
• UP: Press to increase the current menu value
• DOWN: Press to decrease current menu value
• ENTER: Press to save the current menu value

The menu options displayed on the control panel are as follows:

—-

| Unit warming up please wait Unit is ready to use
Bubble control| Bo1 Bo0| Bubble flow on Bubble flow off
DMX512| A001-512| Set DMX address
Smoke volume| P1-100| Set fog output volume (low to high)
Fan speed| F1-F100| Set fan speed (low to high)
LED controls| CX0| No LED
CX1| Red LEDs
CX2| Green LEDs
CX3| Blue LEDs
CX4| Red and Green LEDs
CX5| Red and Blue LEDs
CX5| Green and Blue LEDs
CX6| Red, Green and Blue LEDs
CX7| Colour change
CX8| Colour fade in
CX9| Colour fade out

Wireless remote
The small RF remote control supplied can also be used when wireless control of the unit is needed. Press the relevant button repeatedly on the RF remote for the following functions:

1. Fog effect 40%/90%/off
2. Bubbles on/off
3. Fan 30%/80%/off
4. LED R/G/B/R+G/R+B/G+B/R+G+B/Col change/Col fade

DMX Control
For DMX control, connect a signal source to the DMX input on the unit via a balanced XLR lead. Extra units can also be controlled with the same DMX signal by looping through the DMX out on the unit. Set the unit to DMX512 mode and confirm the correct start address, then use the table below for channel selection.

Specifications

Troubleshooting

No power to main unit| Check mains voltage is correct and socket is switched on
---|---
Check IEC lead is OK and connected properly
Check mains fuse in IEC connector and fuse in plug top
If fuse blowing repeatedly, refer to qualified service personnel
Power to unit but no| Check fluid level in tanks
haze/bubble output in| If fluid is OK and pump working, the lines may be blocked
manual or continuous| Check that output is not set to zero on the control panel
mode| Check that output is not switched off on the keyfob remote
 | If blocked, clean with cleaner & distilled water
 | Check that if DMX mode is selected, the DMX channel is correct
 | In DMX mode, check that haze output is not set to zero

• This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines
• Errors and omissions excepted. Copyright© 2024 AVSL Group Ltd, Unit 2 Bridgewater Park, AVSL (Europe) Ltd, Unit 3D North Point House,
• Taylor Road, Trafford Park, Manchester. M41 7JQ. North Point Bus. Park, New Mallow Road, Cork, Ireland.

www.avsl.com

FAQ

Q: What should I do if the product arrives damaged or with missing accessories?
A: Contact your local dealer immediately. Do not attempt to fix it yourself to avoid invalidating the warranty.

Q: How should I clean the product?
A: Use a soft dry or slightly damp cloth for cleaning. Avoid strong solvents. Periodically clean the fog mechanism with distilled water and use fog machine cleaning fluid recommended.

References

• AVSL
• AVSL

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>