Simple 802961 Magnetic Car Vent Charger User Manual
- June 12, 2024
- Simple
Table of Contents
Simple 802961 Magnetic Car Vent Charger User Manual
PRODUCT DIAGRAM
Thank you for choosing our Car Vent Mount Magnetic Charger, please read this manual carefully and keep it properly before you use it
PRODUCT SPECS
Product name:
Magnetic Car Vent Charger
Model#: 802961
Interface: Type-C
Input: 5V/2A, 9V/2A, 12V/1.5A
Output: 5W/7.5W/10W/15W Max
Supports: iPhone 12/13/14, series.
Housing Material: PC+ABS
Magnet: N52H grade NdFeBoron
Mag n etic Load-bearing: 1100g
Size: 94.5×64.4×28.4mm (w/o clip)
Weight: 89g
WHAT’S IN THE BOX
- 1x – Wireless charger
- 1x – “Twist-to-lock” screw vent hook
- 1x – Charging cable
- 1x – User manual
INSTRUCTIONS
- Attach the screw ook to the product, tighten the knob on the bacic and sacure the screw hook it tha <ar vent by iantening the knob,
- Insert the USE-C plug into the car charging USE-C port, insert the USB-C piug into the magnetic wireless chareing station. ensuring the phone’s charging arca contacts the wirslass. Charger zone: usually located In the middie of the phone.
- Supported devices include iPhone 12/13/14 series with magnetic wireless charging capabllity. It 1s recommended to use standard Cases for Ibhona 12/13/14 series, as third-party magnat Secessories may not be compatible with the charger.
IMPORTANT SAFETY INSTRUCTIONS
- This product s sutaslefo use withinthe temperate range 0710 35″ (32°F L0 95°F), Storage temperature 1s 20° to. 0% (82T to 140D
- Auoid using orstoring this product iy direct sunliah, near heating equipment, ot n other high-temperature. Enuronmants, 0o ot immerce i water
- D0 not attempt to disassemble or repair it yourselt.
- Supervise children when using this product,
- Keep the wireless charging area clear of metal or objects AVOId placing magnetic stripe cards
- Credit cards, hone cards, bank books, and record cards) near Vireless charger {o prevent damage from the magnetic field No guarantee can be applied in case of misuse.
- The manufacturer declines all responsibilty for material damage or damage to physical of moral e to misuse and / o non-compiiance with safety instructions.
FCC WARNING STATEMENT
Warning: This equioment has been tested and found to &Gmply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These lmits are designed to provide reasonable protection against harmful interference in a residential Installation. This equipment generates, uses and can radiate radio frequency eneray and, I not Installed and used in accordance with the nstructions, may cause harmful interference to radio. communications. However, there is no guarantee that interference Wil not occur n a partcuiar nstallation If this squipment doss. ause harmiul interference to radio or television reception, which Gan be determined by turing the equipment off and on, the user is ncouraged to ry to carrect the interferance by one or mare of the following measures:
- increase the separation betwaen the squipment and receiver.
- Connect the eduipment into an outlet on a circut different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications to this device not explicily ‘approved by manufacturer could void your autharity to operate. this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device. may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause. Undesired operation.
RF Exposure Information
This equipment comlies with FCC radiation exposure imits set forth for an uncontrolled environment. This eauipment should be installed and operated with minimum distance 15820¢m between the radiator and your body.
This product is designed to minimize potential is’in accordance with FCC guidelines.
Simple™ / Designed in Orange County, CA, 19800 MacArthur Bivd. Suite 300, Irvine California, 92612 / United States of America
WARRANTY
How do I activate my FREE upgraded limited lifetime replacement warranty?*
Registration required for Limited Lifetime Replacement Warranty. Standard 1 year manufacturer warranty applies if not registered.
See website for details.
https://www.instaprotek.com/en/terms
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>